Caractéristiques
- Modèle: 700
- Type d'arme: Remington
- Poids du colis: 0.136kg
- Hauteur d'expédition: 20mm
- Largeur d'expédition: 86mm
- Longueur d'expédition: 175mm
- UPC: 050806008373
Le prix inclut la TVA mais pas la livraison .
Référence: 080097701
050806008373 L'outil à ressort fournit une pression constante et directe pour maintenir les oreilles de verrou carrées contre le récepteur tout en lapant avec un abrasif en carbure de silicium de 600 à 800 grains. Offre de meilleurs résultats qu'une simple pression du pouce. Les manchettes filetées interchangeables s'adaptent aux actions populaires listées ci-dessous.Le kit de lapping pour boulons à 2 pièces pour Remington 700 de BROWNELLS est conçu pour offrir une pression constante et précise lors du lapping.
Cet outil à ressort fournit une pression constante et directe pour maintenir les lugs de boulon bien en place contre le récepteur pendant le lapping avec un abrasif en carbure de silicium de 600 à 800 grains. Il offre de meilleurs résultats qu'une simple pression avec le pouce.
Les manchons filetés interchangeables s'adaptent aux actions populaires énumérées ci-dessous :
Chaque Set One Gun contient le corps de l'outil à boulon, le plongeur et le manchon de la bonne taille pour le modèle indiqué. Le Set One Gun M14/M1A comprend le corps de l'outil à boulon, un plongeur de grand diamètre, le manchon de la bonne taille, et un outil de lapping de boulon spécial unique aux modèles M14/M1A/M1 Garand.
Ce kit contient tous les outils nécessaires pour le lapping de tous les modèles indiqués dans le tableau.
*Prix spécial, voir ci-dessous.
Very nice fit of parts. 31.08.2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.