Increased size allows you to reach over the receiver and operate the bolt with your "off" hand without taking your finger out of shooting position. Provides plenty of extra leverage to help clear a jammed chamber in only seconds. Reverse contour and open center design gives better grip with gloved hands. Easy to install, requires no alteration to gun.
Dimensione maggiore permette di raggiungere oltre il ricevitore e azionare l'otturatore con la mano "off" senza prendere il dito fuori dalla posizione di tiro. Fornisce l'abbondanza di leva supplementare per aiutare a cancellare una camera inceppata in soli pochi secondi. Contorno inversa e centro aperto design dà meglio afferrare con le mani inguantate. Facile da installare, non richiede nessuna alterazione alla pistola.
Specifiche: acciaio 4140, azzurrate finitura. Maniglia è 1,25 cm (3.1) alto, 7/8"(22 mm) larghezza. Si inserisce il Remington 1100, solo 11-87.
Altro...
Punteggi dei clienti per CHOATE COMBAT BOLT HANDLE REMINGTON 1100/11-87
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 3.8
junk(08.12.2009)
i put this product on my slug gun and it fell out and was lost the third day i used it.
Good handle, questionable firearm design(02.09.2010)
This handle is about as easy as it gets to install. You just pull out the existing handle and push this in. No tools required. However that can lead to problems down the road.
There is nothing wrong with this handle. Something can be argued for the design of the Remington 1100/1187 but that does not reflect the design and quality of this handle. It can be accidentally pulled out if you're not careful (my rationale for buying 2). I find that I'm only using 2 fingers or the palm of my hand to operate this handle. Other tactical designs there is a tendency to wrap your hand around it, thus creating more opportunity to pull it out.
This handle makes operating the 1100/1187 much easier than the factory handle. Easy to operate with gloves and well made.
Great addition to my 11-87(26.05.2011)
This is a great bolt handle. Make sure you push it in all the way and you wont have a problem. Easy to install
LOVE IT!(29.10.2013)
This is an OUTSTANDING alternative to that tiny factory stub. Great for fast an easy manipulation of the bolt. I do understand the issues others have had regarding the flimsy manner in which the bolt handle is retained on the bolt assembly. However, that seems to be more of an issue with the Remington design. Avoid over-lubrication and if concerned maybe rosin it up a little with something like a drop of finger nail polish (just a tiny bit in the notch on the handle after degreasing).
Great product I tested for ten months.(22.12.2013)
I tested and researched this item for 10 months in over 20 different 1100 12ga. guns. It failed 2 times due to my not pushing it in properly. Items made in the past 5 years work great. Rumors are from a bad run on maybe 100 units which did cause a slight problem with unit falling out. This was caught and corrected by manufacturer. If one happens to end up with one of these random items no problem you can send it back for a replacement I'm sure. Anyway these are class acts and highly recommended. They are made by Choate a company I find to be excellent. They take care of their customers. Thanks, Al.
Works Great(18.09.2015)
Used this for my 1100 tactical shotgun during a NRA LE Handgun/Shotgun Instructor Course. It worked great, never had any problems. Very easy to operate during incapacitation drills and off hand shooting.
N. prodotto: 159101112 CHOATE COMBAT BOLT HANDLE REMINGTON 1100/11-87 Parti Fabbricante: CMT011002 Dimensione maggiore permette di raggiungere oltre il ricevitore e azionare l'otturatore con la mano "off" senza prendere il dito fuori dalla posizione di tiro. Fornisce l'abbondanza di leva supplementare per aiutare a cancellare una camera inceppata in soli pochi secondi. Contorno inversa e centro aperto design dà meglio afferrare con le mani inguantate. Facile da installare, non richiede nessuna alterazione alla pistola.
24.9CHF18CHF 24.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Remington
Finitura:
Nero
Modello:
11-87,1100
Peso della spedizione: 0.018kgAltezza di spedizione: 3mmLarghezza di spedizione: 112mmLunghezza di spedizione: 155mm
Increased size allows you to reach over the receiver and operate the bolt with your "off" hand without taking your finger out of shooting position. Provides plenty of extra leverage to help clear a jammed chamber in only seconds. Reverse contour and open center design gives better grip with gloved hands. Easy to install, requires no alteration to gun.
Dimensione maggiore permette di raggiungere oltre il ricevitore e azionare l'otturatore con la mano "off" senza prendere il dito fuori dalla posizione di tiro. Fornisce l'abbondanza di leva supplementare per aiutare a cancellare una camera inceppata in soli pochi secondi. Contorno inversa e centro aperto design dà meglio afferrare con le mani inguantate. Facile da installare, non richiede nessuna alterazione alla pistola.
Specifiche: acciaio 4140, azzurrate finitura. Maniglia è 1,25 cm (3.1) alto, 7/8"(22 mm) larghezza. Si inserisce il Remington 1100, solo 11-87.
Altro...
Punteggi dei clienti per CHOATE COMBAT BOLT HANDLE REMINGTON 1100/11-87
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 3.8
junk(08.12.2009)
i put this product on my slug gun and it fell out and was lost the third day i used it.
Good handle, questionable firearm design(02.09.2010)
This handle is about as easy as it gets to install. You just pull out the existing handle and push this in. No tools required. However that can lead to problems down the road.
There is nothing wrong with this handle. Something can be argued for the design of the Remington 1100/1187 but that does not reflect the design and quality of this handle. It can be accidentally pulled out if you're not careful (my rationale for buying 2). I find that I'm only using 2 fingers or the palm of my hand to operate this handle. Other tactical designs there is a tendency to wrap your hand around it, thus creating more opportunity to pull it out.
This handle makes operating the 1100/1187 much easier than the factory handle. Easy to operate with gloves and well made.
Great addition to my 11-87(26.05.2011)
This is a great bolt handle. Make sure you push it in all the way and you wont have a problem. Easy to install
LOVE IT!(29.10.2013)
This is an OUTSTANDING alternative to that tiny factory stub. Great for fast an easy manipulation of the bolt. I do understand the issues others have had regarding the flimsy manner in which the bolt handle is retained on the bolt assembly. However, that seems to be more of an issue with the Remington design. Avoid over-lubrication and if concerned maybe rosin it up a little with something like a drop of finger nail polish (just a tiny bit in the notch on the handle after degreasing).
Great product I tested for ten months.(22.12.2013)
I tested and researched this item for 10 months in over 20 different 1100 12ga. guns. It failed 2 times due to my not pushing it in properly. Items made in the past 5 years work great. Rumors are from a bad run on maybe 100 units which did cause a slight problem with unit falling out. This was caught and corrected by manufacturer. If one happens to end up with one of these random items no problem you can send it back for a replacement I'm sure. Anyway these are class acts and highly recommended. They are made by Choate a company I find to be excellent. They take care of their customers. Thanks, Al.
Works Great(18.09.2015)
Used this for my 1100 tactical shotgun during a NRA LE Handgun/Shotgun Instructor Course. It worked great, never had any problems. Very easy to operate during incapacitation drills and off hand shooting.