Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
100050275
Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.  
43.9 43.9 7 CHF
Référence: 100050275
RIFLESPEED GAS CONTROL REBUILD KIT #1 0.927"
Ref Fabricant: US0134
43.9 CHF 4 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.045kg Hauteur d'expédition: 6mm Largeur d'expédition: 102mm Longueur d'expédition: 127mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x



Référence: 100050274
RIFLESPEED GAS CONTROL REBUILD KIT #0 0.917"
Ref Fabricant: US0133
43.9 CHF 4 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100050276
RIFLESPEED GAS CONTROL REBUILD KIT #2 0.937"
Ref Fabricant: US0135
43.9 CHF 1 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100050277
RIFLESPEED GAS CONTROL REBUILD KIT #3 0.947"
Ref Fabricant: US0136
43.9 CHF 6 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100050278
RIFLESPEED GAS CONTROL REBUILD KIT #4 0.957"
Ref Fabricant: US0137
43.9 CHF 7 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100050279
RIFLESPEED GAS CONTROL REBUILD KIT #5 0.967"
Ref Fabricant: US0138
43.9 CHF 7 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100050280
RIFLESPEED GAS CONTROL REBUILD KIT #6 0.979"
Ref Fabricant: US0139
43.9 CHF 7 CHF 43.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Rebuild your Riflespeed Gas Control with this OEM Rebuild Kit. Includes Plunger in your choice of sizes (see below), 17-7 stainless steel Wave Spring, Gas Tube Roll Pin, Barrel Cross Pin, and two Set Screws. Rebuild is recommended when replacing barrels or between 10,000 and 25,000 rounds, depending on your firing schedule. Sizes are based on the Plunger size included with each kit. Measure the plunger that is being replaced or refer to the Common Configurations and Settings chart on the Technical Documents page linked below to determine the correct size for your application.  
Newsletter