Caractéristiques
- Modèle: K Frame
- Type d'arme: Smith & Wesson
- Poids du colis: 0.068kg
- Hauteur d'expédition: 4mm
- Largeur d'expédition: 108mm
- Longueur d'expédition: 108mm
Détails de l'article
US export classification: 0A501.x

Le prix inclut la TVA mais pas la livraison .
Référence: 713000167
N° fabr.: P-1-01
Les nez de marteau plus longs et à ressort offrent une ignition constante et positive avec la tension de marteau la plus légère, permettant une action plus légère et plus fluide. Fabriqués par des processus de découpe au fil EDM et d'usinage CNC de précision, avec un traitement thermique contrôlé de qualité en acier S7. Les nez de marteau sont usinés, pas estampés. Conçus pour être robustes et offrir une longue durée de vie. Ce kit comprend un nez de marteau, un ressort et un rivet de nez de marteau. En général, un remplacement normal est tout ce qui est nécessaire, bien que certaines variations d'usine puissent nécessiter un ajustement mineur. Conçu pour les modèles Smith & Wesson à percussion centrale, K, L et N.Le Kits de nez de marteau pour S&W de POWER CUSTOM est la solution parfaite pour ceux qui cherchent à optimiser leur arme. Ces nez de marteau à ressort offrent une ignition positive et constante avec la tension de marteau la plus légère, permettant une action plus douce et plus légère.
En général, un remplacement normal suffit, bien que certaines variations d'usine puissent nécessiter un ajustement mineur. Conçu pour être robuste et offrir une longue durée de vie, ce kit est un incontournable pour tout passionné de tir.
it didn'work 07.08.2016
Installed in a mod 66-1 S&W. tried lighten DA trigger pull. Installation was easy,no problems. Test fired ,3 misfires out of 6 DA, 1 out of 6 SA. Tried factory ammo,same results. Removed new firing pin,measured and compared with old,and no differences. Reinstalled old firing pin,no further problems. First time Power Custom has let me down.
Misfire problem solved. 02.11.2015
I have a recently acquired nearly unfired 1971 vintage model 19-3 that was misfiring (1 in 6) with 357 Magnum ammunition featuring CCI 550 primers, even when the DA trigger weight was increased to 10 lbs using a primer cup on the strain screw. Checking the hammer nose projection showed it was about 0.02 inch short of the thickness of a Dime. So, the obvious conclusion is that the Bangor Punta vintage hammer nose was just a bit short.
Since parts for these older models can be difficult to find I decided to try the Power Custom hammer nose for a post 1988 lockwork. The new hammer nose dropped right in and needed no fitting at all. The projection is a bit on the heavy side, about 0.06 inch per my calibrated eyeball but a 150 round test in both double and single action showed no indication at all of an overstruck primer and there were zero misfires in that test.
Kudo's to Power Custom for the instruction/guidance that was packaged with the kit. While I didn't need to do any fitting it was nice to see they provided clear illustrations of the fitting points. It was also helpful to see clear instructions on how it should function and how to test for correct function.
Based on my single sample test I think it is actually fairly safe to assume that this particular hammer nose will fit K frame hammers from 1971 to later vintages. I also think that the tensioning spring will act to protect the hammer nose a bit when compared to the older version.
Nous avons rencontré une erreur lors du chargement de ce contenu. Veuillez actualiser la page pour continuer. Si le problème persiste, contactez notre service client.