Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
050806113459 078000587
Maximize the Performance of Your Glock 48? With an Upgraded "Top Half"
With a Brownells Front Cut Slide for the Glock® 48 installed, you'll find your Glock® becomes easier to operate without any change in its reliability. The G48  greatest strength is that it lets you carry a thin pistol with 10rounds of centerfire punch in an compact EDC package. As a bonus this slide will also fit on you G43x and 43 with the correct G48 barrel, converting your ultra compact to a ultra thin long slide version.   Our Front Cut Slide gives you more grasping surface on your Glock® 48 by adding deep-cut serrations at the front of the slide. This is a big help when making a quick press check of the chamber. Both the front and rear serrations have crisp 90-degree edges that give you excellent purchase, and they're cut to the same depth as the factory grooves - so there's no compromise of the slide's overall strength.   We also offer the Front Cut Slide for Glock® 48 in a "window" configuration with a window cut in the top of the slide ahead of the ejection port. This aids in barrel cooling, slightly reduces the weight of the slide for faster cycling, and…well, it just looks cool, too. Machined from heat-treated & hardened 17-4 stainless steel billet Hard, wear-resistant matte black Nitride finish Internal dimensions identical to factory slide Factory rear sight dovetail & front sight tenon cut Slide only - no internal parts (see Gun Tech Note below) The Front Cut Slide for Glock® 48 comes with a factory rear sight dovetail and slot for the front sight tenon. It will accept both factory "iron" (actually, plastic) sights and any aftermarket sights that fit the factory cuts. Upgrade the slide on your pocket Glock today for immediate improvement in its functionality and performance - and your shooting enjoyment.   Brownells Gun Tech™ Note: The Front Cut Slide for Glock® 48 consists of the bare slide only. You will need to retain your pistol's existing barrel (or an aftermarket upgrade) and recoil guide / spring assembly, firing pin assembly, extractor, extractor depressor plunger & spring assembly, firing pin safety & spring, and your back plate. The G48 slide does not require a firing pin channel liner.  
249.9 269.9 2 CHF
Référence: 078000587
BROWNELLS IRON SIGHT SLIDE FOR GLOCK® 48 STAINLESS NITRIDE
Ref Fabricant: NONE 050806113459
249.9 CHF 17 CHF 249.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: 9 mm Luger Finition: Black Nitride Manufacture: Glock Modèle: 48 Visées: Iron

Restrictions d'Achat

  • Permis d'acquisition d'arme requis

Caractéristiques

Calibre: 9 mm Luger Finition: Black Nitride Manufacture: Glock Modèle: 48 Visées: Iron Poids du colis: 0.336kg Hauteur d'expédition: 51mm Largeur d'expédition: 51mm Longueur d'expédition: 178mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x



Référence: 078000588
BROWNELLS IRON SIGHT SLIDE +WINDOW FOR GLOCK® 48 STAINLESS NITRIDE
Ref Fabricant: NONE 050806113466
269.9 CHF 174 CHF 269.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: 9 mm Luger Finition: Black Nitride Manufacture: Glock Modèle: 48 Style: Window Visées: Iron
Maximize the Performance of Your Glock 48? With an Upgraded "Top Half"
With a Brownells Front Cut Slide for the Glock® 48 installed, you'll find your Glock® becomes easier to operate without any change in its reliability. The G48  greatest strength is that it lets you carry a thin pistol with 10rounds of centerfire punch in an compact EDC package. As a bonus this slide will also fit on you G43x and 43 with the correct G48 barrel, converting your ultra compact to a ultra thin long slide version.   Our Front Cut Slide gives you more grasping surface on your Glock® 48 by adding deep-cut serrations at the front of the slide. This is a big help when making a quick press check of the chamber. Both the front and rear serrations have crisp 90-degree edges that give you excellent purchase, and they're cut to the same depth as the factory grooves - so there's no compromise of the slide's overall strength.   We also offer the Front Cut Slide for Glock® 48 in a "window" configuration with a window cut in the top of the slide ahead of the ejection port. This aids in barrel cooling, slightly reduces the weight of the slide for faster cycling, and…well, it just looks cool, too. Machined from heat-treated & hardened 17-4 stainless steel billet Hard, wear-resistant matte black Nitride finish Internal dimensions identical to factory slide Factory rear sight dovetail & front sight tenon cut Slide only - no internal parts (see Gun Tech Note below) The Front Cut Slide for Glock® 48 comes with a factory rear sight dovetail and slot for the front sight tenon. It will accept both factory "iron" (actually, plastic) sights and any aftermarket sights that fit the factory cuts. Upgrade the slide on your pocket Glock today for immediate improvement in its functionality and performance - and your shooting enjoyment.   Brownells Gun Tech™ Note: The Front Cut Slide for Glock® 48 consists of the bare slide only. You will need to retain your pistol's existing barrel (or an aftermarket upgrade) and recoil guide / spring assembly, firing pin assembly, extractor, extractor depressor plunger & spring assembly, firing pin safety & spring, and your back plate. The G48 slide does not require a firing pin channel liner.  
Newsletter