Contoured For Maximum Comfort & Leverage; Compatible With All Magna-Tip Bits
Ratcheting driver provides extra leverage for maximum torque transfer to quickly tighten or loosen any gun screw that accepts a Magna-Tip bit. Ergonomically designed T-shaped handgrip of high-impact plastic is contoured to ensure maximum comfort and control. Stainless steel shank keeps bit precisely centered, while a powerful magnet prevents slipping or falling out. Heavy duty ratcheting mechanism provides smooth, dependable three-way operation in Clockwise, Counter-Clockwise, and Locked modes. The large control dial allows fast mode changes, yet is positioned on the underside of handle to prevent accidental change of direction. Fits in the Magna-Tip Master Storage Block, available separately.
SPECS: High-impact plastic handle, stainless steel shank. 5½” (14cm) long overall. 3-5⁄8" (9.2cm) long shank. Handle is 3” (7.6cm) wide at widest point. Accepts ¼” hex bits, including all Magna-Tip bits.
Altro...
Sagomato per il massimo Comfort & leva; Compatibile con tutti i bit di Magna-Tip
A cricchetto driver fornisce leva supplementare per il trasferimento di coppia di torsione massima stringere o allentare qualche vite di pistola che accetta un po' di Magna-punta rapidamente. Impugnatura ergonomica a T di plastica ad alto impatto è sagomato per garantire il massimo comfort e controllo. Gambo in acciaio inox mantiene punta precisamente centrato, mentre un potente magnete impedisce di scivolare o cadere. Pesanti a cricchetto meccanismo fornisce liscia, affidabile funzionamento a tre vie in modalità bloccata, in senso orario e antiorario. La grande manopola consente modifiche modalità veloce, eppure è posizionata nella parte inferiore del manico per evitare modifiche accidentali della direzione. Si inserisce nel blocco di archiviazione Magna-punta Master, disponibile separatamente.
Specifiche: manico in plastica ad alto impatto, in acciaio inox gambo. 5½"(14cm) lungo assoluto. 3-5 ⁄ 8 (cm 9.2) gambo lungo. Maniglia è 3"(7,6 cm) largamente al punto più largo. Accetta ¼" esagonale bit, tra cui tutti i bit di Magna-Tip.
Altro...
Punteggi dei clienti per BROWNELLS MAGNA-TIP RATCHET HANDLE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 5
Take a look!(01.10.2009)
If you're looking for lasting quality, this ratchet is it. Same manufacturer of Williams/Snap-on Tools. Quality built for the professional. Only wish they would offer in the 2" version also, getting your hand closer to the work.
good buy, easy to use(23.01.2011)
I use it in my shop to remove or to put on recoil pads. It works great. It also easy on your wrist. You do not get tired fro all that twsting.
Identical to Snap-On models(10.02.2013)
A good thing to point out is that this is identical to the Snap-On brand T-handle screw driver which sells for quite a bit more. I am a mechanic and Snap-On makes some of the best(and most expensive) mechanics tools you can buy. I was happy to see a rebranded model like this and you can feel the high quality level holding it. For anyone who will be using their tools alot or professionally this is a must have. If it will sit in a drawer for most of its like you can get away with a lesser brand.
N. prodotto: 080000513 BROWNELLS MAGNA-TIP RATCHET HANDLE Parti Fabbricante: WRST4050806108899 A cricchetto driver fornisce leva supplementare per il trasferimento di coppia di torsione massima stringere o allentare qualche vite di pistola che accetta un po' di Magna-punta rapidamente. Impugnatura ergonomica a T di plastica ad alto impatto è sagomato per garantire il massimo comfort e controllo. Gambo in acciaio inox mantiene punta precisamente centrato, mentre un potente magnete impedisce di scivolare o cadere. Pesanti a cricchetto meccanismo fornisce liscia, affidabile funzionamento a tre vie in modalità bloccata, in senso orario e antiorario. La grande manopola consente modifiche modalità veloce, eppure è posizionata nella parte inferiore del manico per evitare modifiche accidentali della direzione. Si inserisce nel blocco di archiviazione Magna-punta Master, disponibile separatamente.
74.9CHF135CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Contoured For Maximum Comfort & Leverage; Compatible With All Magna-Tip Bits
Ratcheting driver provides extra leverage for maximum torque transfer to quickly tighten or loosen any gun screw that accepts a Magna-Tip bit. Ergonomically designed T-shaped handgrip of high-impact plastic is contoured to ensure maximum comfort and control. Stainless steel shank keeps bit precisely centered, while a powerful magnet prevents slipping or falling out. Heavy duty ratcheting mechanism provides smooth, dependable three-way operation in Clockwise, Counter-Clockwise, and Locked modes. The large control dial allows fast mode changes, yet is positioned on the underside of handle to prevent accidental change of direction. Fits in the Magna-Tip Master Storage Block, available separately.
SPECS: High-impact plastic handle, stainless steel shank. 5½” (14cm) long overall. 3-5⁄8" (9.2cm) long shank. Handle is 3” (7.6cm) wide at widest point. Accepts ¼” hex bits, including all Magna-Tip bits.
Altro...
Sagomato per il massimo Comfort & leva; Compatibile con tutti i bit di Magna-Tip
A cricchetto driver fornisce leva supplementare per il trasferimento di coppia di torsione massima stringere o allentare qualche vite di pistola che accetta un po' di Magna-punta rapidamente. Impugnatura ergonomica a T di plastica ad alto impatto è sagomato per garantire il massimo comfort e controllo. Gambo in acciaio inox mantiene punta precisamente centrato, mentre un potente magnete impedisce di scivolare o cadere. Pesanti a cricchetto meccanismo fornisce liscia, affidabile funzionamento a tre vie in modalità bloccata, in senso orario e antiorario. La grande manopola consente modifiche modalità veloce, eppure è posizionata nella parte inferiore del manico per evitare modifiche accidentali della direzione. Si inserisce nel blocco di archiviazione Magna-punta Master, disponibile separatamente.
Specifiche: manico in plastica ad alto impatto, in acciaio inox gambo. 5½"(14cm) lungo assoluto. 3-5 ⁄ 8 (cm 9.2) gambo lungo. Maniglia è 3"(7,6 cm) largamente al punto più largo. Accetta ¼" esagonale bit, tra cui tutti i bit di Magna-Tip.
Altro...
Punteggi dei clienti per BROWNELLS MAGNA-TIP RATCHET HANDLE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 5
Take a look!(01.10.2009)
If you're looking for lasting quality, this ratchet is it. Same manufacturer of Williams/Snap-on Tools. Quality built for the professional. Only wish they would offer in the 2" version also, getting your hand closer to the work.
good buy, easy to use(23.01.2011)
I use it in my shop to remove or to put on recoil pads. It works great. It also easy on your wrist. You do not get tired fro all that twsting.
Identical to Snap-On models(10.02.2013)
A good thing to point out is that this is identical to the Snap-On brand T-handle screw driver which sells for quite a bit more. I am a mechanic and Snap-On makes some of the best(and most expensive) mechanics tools you can buy. I was happy to see a rebranded model like this and you can feel the high quality level holding it. For anyone who will be using their tools alot or professionally this is a must have. If it will sit in a drawer for most of its like you can get away with a lesser brand.