Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

APEX TACTICAL SPECIALTIES INC
M&P RED FLAT FACE FORWARD SET TRIGGER

856008005529 100017344
The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

279.9 279.9 1 CHF
Référence: 100017344
APEX TACTICAL SPECIALTIES INC RED FLAT FACED FORWARD SET SEAR & TRIGGER KIT M&P
Ref Fabricant: 100-055 856008005529 Le nouveau plat face Forward Set déclencheur offre une sensation et performance d’un déclencheur de type 1911 usine à un poids approximatif de 3.0 à 4.0 lbs. Conçu pour fonctionner dans n’importe quel pistolet Smith Wesson & & Maes dans une percussion centrale caliber(excluding Shield), le Apex plat face Forward Set Trigger Kit réduit déclencheur avant leur départ et braquage excessif, tout en permettant le tireur afin de positionner leur doigt à un point de levier accru plus bas sur le visage de détente pour profiter de détente plus faible poids de traction. Le plat face Forward Set déclencheur par lui-même est conçu pour fonctionner avec votre kit Apex avant la valeur Sear existant et ne fonctionnera pas avec les pièces de contrôle du feu Smith Wesson & usine. Inclus dans le kit sont les Apex avant la valeur Sear qui raccourcit la course de la détente en laissant tomber l’attaquant à un point situé plus en avant que la gâchette de l’usine. Le bloc de l’attaquant ultime produit une détente plus lisse et élimine les problèmes de remise à zéro plus fausses par un rayon amélioré sur la face du bloc attaquant. Le kit de ressorts ensemble avant provoque une détente de 3.0 à 4.0 lbs, selon quel déclencheur retournent printemps insalled. Nécessite l’utilisation de la gâchette bloc conçu pour le plongeur infrarouge de grande taille et printemps (production actuelle à partir de juin 2011) non recommandé pour les applications de service/porte du logement. Ne s’adapte pas M & P 2.0 pistolets
279.9 CHF 10 CHF 279.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Finition: Rouge Manufacture: Smith & Wesson Modèle: M&P Style: Compétition, Amelioré

Caractéristiques

Finition: Rouge Manufacture: Smith & Wesson Modèle: M&P Style: Compétition,Amelioré Poids du colis: 0.005kg Hauteur d'expédition: 20mm Largeur d'expédition: 79mm Longueur d'expédition: 89mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c



The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

Newsletter