I kit di estensione MXT di Nordic Components offrono una soluzione universale per aumentare la capacità delle carabine 12ga, realizzati in alluminio anodizzato 6061.
Made in Usa
Classificazione per l'export dagli US: 0A502
Specifiche:
Calibro: Calibro 12
Capacità: 5-colpi
84.1184.111CHF
Sale
-30 %
CHF 119.90
84.11CHFCHF 84.11
Risparmi CHF 35.79
Prezzi comprensivi di IVA più spedizione
N. prodotto: 100501035
N. fab.: MXT-TBS-12-5K
816696021492 I kit di estensione MXT di Nordic Components sono una soluzione universale per aumentare la capacità di una varietà di fucili a pompa calibro 12. Questi kit di estensione MXT includono: il tubo con la capacità aggiuntiva che selezioni, la molla della lunghezza corretta per il tubo e un tappo finale. Seleziona semplicemente il kit di estensione MXT con la capacità appropriata di cui hai bisogno, quindi acquista il corretto dado di estensione del tubo di Nordic Components che si adatta al tuo fucile (venduto separatamente). I modelli "B" sono progettati per un adattamento a filo sui Benelli M1/M2 (+3B su canna da 18.5"; +5B su canna da 21") Alluminio anodizzato 6061 per resistenza e leggerezza Presenta una scanalatura di rilascio per eliminare il movimento della morsa del canna e garantire una posizione ripetibile dopo il disassemblaggio (solo estensioni da +2 a +9) La scanalatura di rilascio è posizionata fuori centro per consentire la regolazione della posizione invertendo il tubo Lavorato con passo filettato corrispondente su entrambe le estremità per consentire l'inversione del tubo Clicca su questo link per trovare il dado di attacco per la tua applicazione di arma da fuoco: Dado del tubo di estensione
In magazzino
1 pz. nel magazzino locale
Spedizione gratuita a partire da CHF 399.00.
Tempi di consegna circa 2-4 giorni dal magazzino locale.
Nordic Components MXT Extension Tube Kits are a universal fit solution for extending the capacity for a variety of 12ga shotguns. These MXT Extension kits include: the tube in the additional capacity you select, the correct length spring for the tube, and an end cap. Simply select the proper capacity MXT Extension kit you need then purchase the correct Nordic Components Shotgun Extension Tube Nut that fits your shotgun (sold separately). "B" Models are engineered for flush fit on Benelli M1/M2 (+3B on 18.5" barrel; +5B on 21" barrel) Anodized 6061 aluminum for strength and weight Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly (+2 through +9 extensions only) Relief groove located off-center to allow location adjustment by reversing the tube Machined with matching thread pitch on both ends to allow reversing the tube Click this link to find the attachment nut for your firearm application: Extension Tube Nut
Espandi la capacità del tuo fucile con i kit di estensione MXT!
I kit di estensione MXT di Nordic Components sono una soluzione universale per aumentare la capacità di una varietà di fucili a pompa calibro 12. Questi kit di estensione MXT includono:
Il tubo con la capacità aggiuntiva che selezioni
La molla della lunghezza corretta per il tubo
Un tappo finale
Semplicemente seleziona il kit di estensione MXT con la capacità appropriata di cui hai bisogno e poi acquista il corretto Nordic Components Shotgun Extension Tube Nut che si adatta al tuo fucile (venduto separatamente).
Dettagli tecnici:
I modelli "B" sono progettati per un montaggio a filo su Benelli M1/M2 (+3B su canna da 18.5"; +5B su canna da 21")
Realizzati in alluminio anodizzato 6061 per resistenza e leggerezza
Presentano una scanalatura di rilascio per eliminare il movimento del clamp del calcio e garantire una posizione ripetibile dopo il montaggio (+2 a +9 estensioni solo)
La scanalatura di rilascio è posizionata fuori centro per consentire la regolazione della posizione invertendo il tubo
Fresato con passo di filettatura corrispondente su entrambe le estremità per consentire l'inversione del tubo
Clicca su questo link per trovare il dado di attacco per la tua applicazione di arma da fuoco.
Caratteristiche
Calibro:Calibro 12
Capacità:5-colpi
Peso della spedizione:0.191kg
Altezza di spedizione:28mm
Larghezza di spedizione:159mm
Lunghezza di spedizione:464mm
UPC:816696021492
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A502
Recensioni dei clienti
Valutazioni dei clienti (4)
4.8 / 5
Raccomandato
Must Swage the Magazine First on Tac-14 04.04.2018
Mag extension and Remington Nut from Nordic Components work well AFTER you swage or grind the dimples out of the end of the magazine tube. I used the 006-000-119WB Magazine Tube Detent Swage-Remington 12 Gauge from Brownells. I re-used the standard Remington Spring and so far so good. No feeding problems yet.
Should accommodate 6 standard 1/16" crimp 2 3/4" shells tightly in the magazine of a Tac-14 after dimple removal. I use the S&B 00 Buck which has a 7/32" crimp so I only get 5, but boy do they rip.
Assolutamente raccomandato
Fantastic quality at reasonable price 21.07.2017
If you're asking yourself, "Will it really be that much better than some of the cheaper alternatives?" the answer is, "Yes!" I put this +6 under a 28" Stoeger M3k and it fits perfectly (just shy of reaching muzzle). I have cheaper tubes on other guns that "get the job done" but have learned Nordic really is a cut above. Fit and finish perfect, spring is superior quality. Everything installed in minutes, runs like a champ without further adjustment. Super happy. [Buy the clamp too! Fits in tube's groove nicely to prevent sliding, very professional-- totally different league than other less expensive alternatives.]
Assolutamente raccomandato
Stoeger M3K 22.01.2017
I bought a Plus 6 Nordic Components tube for my Stoeger M3K. total rounds 10 plus one in the chamber. It was easy to install, it has a great finish. Just make sure you buy the right Tube Nut for you shotgun.
Assolutamente raccomandato
absolute necessity 17.01.2017
This magazine tube extension kit turned my benelli m2 field into an excellent clay shooter, 3-gunner, and all around better gun. The installation is as easy as screwing it on and cutting the spring to length.
My benelli M2 came with a 26" barrel, and this tube ends up being about a half inch longer than the barrel.
Be aware that this kit comes with the extension tube, end cap, and spring ONLY!!! You still need to purchase the extension tube nut to mount this kit to your gun!
Look up the Nordic Components extension tube nut 12ga.!
(benelli m2 users search part number 100-501-001WB)
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.