Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 399 CHF

100-tägiges Rückgaberecht

Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör

Suisse / Schweiz

Sprachen: Deutsch Français Italiano

Mein Konto (Anmelden)

Merkliste

(0)

Warenkorb

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

WILSON COMBAT
92/96 OVERSIZED MAGAZINE RELEASE

811826020253 965000196

The oversize Beretta® 92/96 magazine release makes it easy to depress your magazine button under stress. Useful for shooters with all hand sizes. No fitting required. Allows shooters with all hand sizes to release the magazine with little or no shift in grip. CNC machined from 4140 heat treated steel. Oversize checkered pad. Black Armor Tuff finish. Not ambidextrous, for right hand shooter on left side of pistol. NOTE: Does not include bushings and spring. Requires re-use of your bushings and spring.

Mehr...

Der übergrosse Magazinrelease für die Beretta® 92/96 erleichtert das Drücken des Magazinbuttons unter Stress. Nützlich für Schützen mit allen Handgrössen. Keine Anpassung erforderlich. Ermöglicht es Schützen mit allen Handgrössen, das Magazin mit wenig oder gar keiner Veränderung des Griffs freizugeben. CNC-gefräst aus 4140 wärmebehandeltem Stahl. Übergrosses, geriffeltes Pad. Schwarze Armor Tuff-Beschichtung. Nicht beidhändig, für Rechtshänder auf der linken Seite der Pistole. HINWEIS: Enthält keine Buchsen und Federn. Erfordert die Wiederverwendung deiner Buchsen und Federn.

Mehr...

Kundenbewertungen zu WILSON COMBAT 92/96 OVERSIZE MAGAZINE RELEASE

Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4.3

Mostly good (01.11.2014)

I recently purchased a M92A1. I decided to trick it out with practical mods. This mag catch works fantastic, but does NOT work with factory hard plastic grips! I have it set up for right-handed shooter and the mag catch will not depress fully, thus magazines would not drop free. Another minor tweak is that when inserting a magazine, sometimes the right top-front edge of the magazine tube would catch on the magazine catch ledge(the one that retains the magazine itself.) So I have to at times forcefully insert and seat a magazine. It may sound like I'm griping, but I'm not. Just PLEEEEEASE, for the sake of safety/function of your firearm, install, check, test, verify before you carry a pistol into a situation where you'll need. it.

Great for shooters with smaller hands! (07.04.2015)

Great quality product like almost all Wilson parts. Made of durable metal and not the flimsy plastic factory release. Easy enough to install and fit great. Hardest part of the installation is getting the bushing and springs seated so pay attention to that part of the video. For the price and functionality it cannot be beat. Fit my 92A1 with Alumagrips great. No fitting or modification required. Great feel on the fingers and big enough I can use my shooting hand middle finger to drop the mag. No second hand required! Highly recommended!

Huge improvement over OEM release. (22.04.2015)

Took watching a few different videos to understand how to properly fit the part, but that's a knock on my amateur gunsmithing abilities not the part. Fits great and works great. I can activate the release with my middle finger on my shooting hand, and I have small hands. Solid metal construction, good fit, and good function. Highly recommend.

OS Mag Release (20.01.2016)

I just installed this into my Beretta 96FS recently and I love it! Makes mag changes easier and smoother without having to adjust my grip on the gun. I watched a couple of videos on how to install it into the grip. It was a little bit of a pain to install but once I got it in there, it was flawless!

Excellent replacement (14.05.2016)

This is an excellent replacement part for the plastic magazine release. I installed this on a M9A1 pistol with Beretta factory plastic grips. One reviewer said it did not work for him. Mine had plenty of clearance and worked GREAT. Not sure what his issue could have been. I have installed 3 of these, one on this pistol, one on a 92A1, and one on a M9. No issues at all with grips. When installing make sure to note the direction the plunger legs go into the recesses. If installing for right hand operation, place the release into the slot and insert the left side into the hole in the frame. Then push in on the right side. It should pop into place.

fitting required on older model (14.02.2018)

The extended release and larger pad are excellent, but my late 80s / early 90s 92 required significant fitting to get it installed. As it was, it only seated all the way after a light tap with a mallet. After smoothing the rounded side with a 2000-grit wet sand & light stoning the ledges on the other side I was able to get it to move freely enough that the springs would return it to the correct position. It wasnt super smooth, but that could've been that I didn't do a great job fitting it.

It may fit newer models better

Checkered Wilson Ovsz Mag Release (23.06.2018)

This looks great, however it took me 6 hours of filing and stoning the part to get it to even slide into the frame. After all of the hand work, I had to cold blue the part. It was a lot of work. I would not buy it again.

Lesen Sie 7 weitere Bewertungen bei brownells.com

69.9 69.9 1 CHF

Artikel-Nr.: 965000196
WILSON COMBAT 92/96 OVERSIZE MAGAZINE RELEASE
Herstellerproduktnummer: 678 811826020253 Der übergrosse Magazinrelease für die Beretta® 92/96 erleichtert das Drücken des Magazinbuttons unter Stress. Nützlich für Schützen mit allen Handgrössen. Keine Anpassung erforderlich. Ermöglicht es Schützen mit allen Handgrössen, das Magazin mit wenig oder gar keiner Veränderung des Griffs freizugeben. CNC-gefräst aus 4140 wärmebehandeltem Stahl. Übergrosses, geriffeltes Pad. Schwarze Armor Tuff-Beschichtung. Nicht beidhändig, für Rechtshänder auf der linken Seite der Pistole. HINWEIS: Enthält keine Buchsen und Federn. Erfordert die Wiederverwendung deiner Buchsen und Federn.

69.9 CHF 5 CHF 69.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Hersteller/Modell: Beretta Modell: 92, 96

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der oversized Magazinrelease erleichtert das Drücken des Magazinbuttons unter Stress.
Er ist für Schützen mit allen Handgrössen geeignet und erfordert keine Anpassung.
Hergestellt aus CNC-gefrästem 4140 wärmebehandeltem Stahl mit schwarzer Armor Tuff-Beschichtung.

Eigenschaften

Hersteller/Modell: Beretta Modell: 92,96 Versandgewicht: 0.091kg Versandhöhe: 13mm Versandbreite: 32mm Versandlänge: 76mm UPC : 811826020253