Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.
SPECS: 4340 chrome moly steel. Blue (BL) or 17-4 stainless steel (SS), matte finish. 2" (5cm) long, .850" (22mm) dia. BL ¾"-28; 975" (24.7mm) dia, SS ¾"-28; 9.80 (24.8mm) dia. Hardened to Rc 42. .250 dia. exit hole, must be drilled out for calibers above .223. Requires threading and indexing of barrel. Instructions included.
Plus...
Trois chambres d’expansion procure jusqu'à réduction de 45 % mesuré en recul de feutre. Triple écran acoustique, d’échappement fentes redirect bruit et museau le souffle loin le tireur. Donne des tireurs de volume élevé un frein à consonance tranquille qui est facile à nettoyer. Fond fermé garde sortie gaz de sauter de la saleté et les débris. Tige conique pour montage facile sur baril de différents diamètres. Ajoute 1-1/4 po pour la longueur du canon. Vient avec un protecteur de fil.
Remarque : calibres au-dessus de 223 le frein de bouche doit être repercé.
Spécifications : 4340 chrome moly acier. Bleu (BL) ou en acier inoxydable 17-4 (SS), fini mat. 2 po (5cm) de long,. 850"(22mm) diamètre BL ¾"-28 ; 975"(24,7 mm) dia, SS ¾"-28 ; 9,80 (24,8 mm) diamètre durcies à Rc 42. .250 Diamètre trou de sortie, doit être repercés pour calibres au-dessus de 223. Nécessite le threading et indexation du barillet. Instructions incluses.
Plus...
Évaluations client de HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS SILVER
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4
Great Break that works(23.11.2010)
I had it fit to a .338 Remington Ultra Mag.
Recoil before the the brake after 5-7 shos with a large soft pad and a Shoulder protector was uncomforatable and consintration was difficult.
With the brake; Shooting Federal 210 gr at over 3000 ft/second, It was as comfortable as my 25-06 with 120 gr. I fired 18 rounds in a row with it and could have shot a lot more.
The Noise didn't seem any more than it was before. Maybe less, fired between walls at a range.
A Great Product that WORKS.
Great Brake(10.08.2011)
Brake is effective and one of the only "open" designs allowing easy cleaning if snow/garbage gets into it. Just wish they sold a thread protector, but nothing a few minutes on a lathe won't correct.
METAL TOO HARD(11.02.2015)
We tore up everything in the gunsmith shop trying to drill this out to .360 for .338 Ultra. Somehow this Stainless Steel was significantly hardened by over heating etc.
Great brake(17.10.2009)
I have installed a number of brakes over the years and this dude is by far the most effective unit I have ever used. Tames '06 to a light 243. The only brake I stock. I have a shop gun with one installed to "sell" them. The only one I recommend.
Référence: 403000021 HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS SILVER Ref Fabricant: NONE Trois chambres d’expansion procure jusqu'à réduction de 45 % mesuré en recul de feutre. Triple écran acoustique, d’échappement fentes redirect bruit et museau le souffle loin le tireur. Donne des tireurs de volume élevé un frein à consonance tranquille qui est facile à nettoyer. Fond fermé garde sortie gaz de sauter de la saleté et les débris. Tige conique pour montage facile sur baril de différents diamètres. Ajoute 1-1/4 po pour la longueur du canon. Vient avec un protecteur de fil.
Référence: 403000009 HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS BLUED Ref Fabricant: NONE Trois chambres d’expansion procure jusqu'à réduction de 45 % mesuré en recul de feutre. Triple écran acoustique, d’échappement fentes redirect bruit et museau le souffle loin le tireur. Donne des tireurs de volume élevé un frein à consonance tranquille qui est facile à nettoyer. Fond fermé garde sortie gaz de sauter de la saleté et les débris. Tige conique pour montage facile sur baril de différents diamètres. Ajoute 1-1/4 po pour la longueur du canon. Vient avec un protecteur de fil.
Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.
SPECS: 4340 chrome moly steel. Blue (BL) or 17-4 stainless steel (SS), matte finish. 2" (5cm) long, .850" (22mm) dia. BL ¾"-28; 975" (24.7mm) dia, SS ¾"-28; 9.80 (24.8mm) dia. Hardened to Rc 42. .250 dia. exit hole, must be drilled out for calibers above .223. Requires threading and indexing of barrel. Instructions included.
Plus...
Trois chambres d’expansion procure jusqu'à réduction de 45 % mesuré en recul de feutre. Triple écran acoustique, d’échappement fentes redirect bruit et museau le souffle loin le tireur. Donne des tireurs de volume élevé un frein à consonance tranquille qui est facile à nettoyer. Fond fermé garde sortie gaz de sauter de la saleté et les débris. Tige conique pour montage facile sur baril de différents diamètres. Ajoute 1-1/4 po pour la longueur du canon. Vient avec un protecteur de fil.
Remarque : calibres au-dessus de 223 le frein de bouche doit être repercé.
Spécifications : 4340 chrome moly acier. Bleu (BL) ou en acier inoxydable 17-4 (SS), fini mat. 2 po (5cm) de long,. 850"(22mm) diamètre BL ¾"-28 ; 975"(24,7 mm) dia, SS ¾"-28 ; 9,80 (24,8 mm) diamètre durcies à Rc 42. .250 Diamètre trou de sortie, doit être repercés pour calibres au-dessus de 223. Nécessite le threading et indexation du barillet. Instructions incluses.
Plus...
Évaluations client de HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS SILVER
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4
Great Break that works(23.11.2010)
I had it fit to a .338 Remington Ultra Mag.
Recoil before the the brake after 5-7 shos with a large soft pad and a Shoulder protector was uncomforatable and consintration was difficult.
With the brake; Shooting Federal 210 gr at over 3000 ft/second, It was as comfortable as my 25-06 with 120 gr. I fired 18 rounds in a row with it and could have shot a lot more.
The Noise didn't seem any more than it was before. Maybe less, fired between walls at a range.
A Great Product that WORKS.
Great Brake(10.08.2011)
Brake is effective and one of the only "open" designs allowing easy cleaning if snow/garbage gets into it. Just wish they sold a thread protector, but nothing a few minutes on a lathe won't correct.
METAL TOO HARD(11.02.2015)
We tore up everything in the gunsmith shop trying to drill this out to .360 for .338 Ultra. Somehow this Stainless Steel was significantly hardened by over heating etc.
Great brake(17.10.2009)
I have installed a number of brakes over the years and this dude is by far the most effective unit I have ever used. Tames '06 to a light 243. The only brake I stock. I have a shop gun with one installed to "sell" them. The only one I recommend.