Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

APEX TACTICAL SPECIALTIES INC
RED M&P SHIELD ACTION ENHANCEMENT TRIGGER

856008005598 100017521
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a red anodized, solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%.  It features a smooth face with a center mounted pivoting safety that maintains factory safety values.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex Shield Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter(based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, Armorer or gunsmith installation of the Ultimate Striker Block into the Shield slide is strongly recommended. The Shield Action Enhancement Trigger Only is perfect for use with the M&P Shield already equipped with the apex Shield Duty/Carry Kit.  Works with all Smith & Wesson M&P Shield pistols in 9mm and .40 calibers, does not work in the Shield 45.  

SPECS: Kit includes:  Red Anodized Aluminum Shield Action Enhancement Trigger, Shield Duty/Carry Kit(Fully machined sear, Ultimate Striker Block, Striker Block Spring, Sear Spring(1/8"), 4lb rated Trigger Return Spring, Trigger Return Spring Installation Shield Slave Pin, Talon Tactical Tool). Trigger Only includes:  Red Anodiezed Aluminum Shield Action Enhancement Trigger, Shield Trigger Return Spring Installation Slave Pin.
 

259.9 259.9 2 CHF
Référence: 100017521
APEX TACTICAL SPECIALTIES INC RED M&P SHIELD ACTION ENHANCEMENT TRIGGER ONLY
Ref Fabricant: 100-057 856008005598 Le bouclier Action amélioration Trigger Kit remplace directement le déclencheur de l’usine à charnières avec un corps de déclencheur rouge anodisé, solide en aluminium qui réduit avant leur départ et braquage excessif d’environ 20 %. Il dispose d’une face lisse avec une sécurité pivotante Centre monté qui maintient les valeurs de sécurité usine. La barre pivotante monté de sécurité du centre empêche la mise en service involontaire en créant un bloc de détente qui se désengagera pas sauf si le tireur met le doigt directement sur le visage de la gâchette. L’Apex bouclier Duty/Carry Kit a été conçu pour donner le propriétaire du pistolet Maes & bouclier une détente lisse et uniforme qui est plus léger environ 2 lb (basé sur les variations dans les tolérances d’usine) avec les avantages de surcourse plus courte et plus facile à détecter déclencher la réinitialisation. Le kit lui-même est conçu pour être encastré et ne devrait pas exiger davantage armurerie. Toutefois, armurier ou installation d’armurier du bloc attaquant ultime dans la glissière du bouclier est fortement recommandée. La propriété bouclier Action amélioration déclencheur seulement est parfait pour une utilisation avec le M & P bouclier déjà équipés de l’apex bouclier Duty/Carry Kit. Fonctionne avec tous les pistolets Smith Wesson & Maes & bouclier en 9mm et.40 calibres, ne fonctionne pas dans les 45 de bouclier.
Avertir lorsque l'article est disponible
Pas disponible.
Caractéristiques: Finition: Rouge Manufacture: Smith & Wesson Modèle: M&P Shield

Caractéristiques

Finition: Rouge Manufacture: Smith & Wesson Modèle: M&P Shield Poids du colis: 0.018kg Hauteur d'expédition: 20mm Largeur d'expédition: 74mm Longueur d'expédition: 137mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c



Référence: 100017520
APEX TACTICAL SPECIALTIES INC RED M&P SHIELD ACTION ENHANCEMENT TRIGGER KIT
Ref Fabricant: 100-056 856008005581 Le bouclier Action amélioration Trigger Kit remplace directement le déclencheur de l’usine à charnières avec un corps de déclencheur rouge anodisé, solide en aluminium qui réduit avant leur départ et braquage excessif d’environ 20 %. Il dispose d’une face lisse avec une sécurité pivotante Centre monté qui maintient les valeurs de sécurité usine. La barre pivotante monté de sécurité du centre empêche la mise en service involontaire en créant un bloc de détente qui se désengagera pas sauf si le tireur met le doigt directement sur le visage de la gâchette. L’Apex bouclier Duty/Carry Kit a été conçu pour donner le propriétaire du pistolet Maes & bouclier une détente lisse et uniforme qui est plus léger environ 2 lb (basé sur les variations dans les tolérances d’usine) avec les avantages de surcourse plus courte et plus facile à détecter déclencher la réinitialisation. Le kit lui-même est conçu pour être encastré et ne devrait pas exiger davantage armurerie. Toutefois, armurier ou installation d’armurier du bloc attaquant ultime dans la glissière du bouclier est fortement recommandée. La propriété bouclier Action amélioration déclencheur seulement est parfait pour une utilisation avec le M & P bouclier déjà équipés de l’apex bouclier Duty/Carry Kit. Fonctionne avec tous les pistolets Smith Wesson & Maes & bouclier en 9mm et.40 calibres, ne fonctionne pas dans les 45 de bouclier.
259.9 CHF 4 CHF 259.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Finition: Rouge Manufacture: Smith & Wesson Modèle: M&P Shield
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a red anodized, solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%.  It features a smooth face with a center mounted pivoting safety that maintains factory safety values.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex Shield Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter(based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, Armorer or gunsmith installation of the Ultimate Striker Block into the Shield slide is strongly recommended. The Shield Action Enhancement Trigger Only is perfect for use with the M&P Shield already equipped with the apex Shield Duty/Carry Kit.  Works with all Smith & Wesson M&P Shield pistols in 9mm and .40 calibers, does not work in the Shield 45.  

SPECS: Kit includes:  Red Anodized Aluminum Shield Action Enhancement Trigger, Shield Duty/Carry Kit(Fully machined sear, Ultimate Striker Block, Striker Block Spring, Sear Spring(1/8"), 4lb rated Trigger Return Spring, Trigger Return Spring Installation Shield Slave Pin, Talon Tactical Tool). Trigger Only includes:  Red Anodiezed Aluminum Shield Action Enhancement Trigger, Shield Trigger Return Spring Installation Slave Pin.
 

Newsletter