Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

RANCH PRODUCTS
10/22® EXTENDED MAGAZINE RELEASE

746122100

Compact Shape Is Faster To Hit; Won't Get In The Way

Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.

SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.

Plus...

Forme compacte est plus rapide à Hit ; N'obtiendrez pas de la manière

Étend la moitié un pouce hors plus loin que la sortie d'usine « RAS » n'est plus facile de frapper et de fonctionner lorsque vous êtes pressé de changer des magazines. Forme mince et compacte ne vous pousser dans le dos si vous portez votre fusil dans une écharpe. Installe sans armurerie.

Spécifications : acier CM, bleu ou acier inoxydable, fini de mat. Étend. 430"(11mm) du fond du receveur.

Plus...

Évaluations client de RANCH PRODUCTS BLUE EXTENDED MAG RELEASE

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.3

10/22 SS Ext. Mag Release (02.10.2011)

Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?

Work's great (10.04.2010)

Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.

Size is decieving (28.08.2010)

When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.

Very good for older 10/22's (10.09.2010)

Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?

Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.

Working as expected (02.02.2011)

Easy to install and works like expected.

vast improvement over stock mag. release (18.06.2011)

This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.

Greatly eases releasing a magazine (19.10.2011)

Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key.
This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free.
Basically how the factory release should be, I highly recommend this to anyone with a 10/22.

Great product! (13.06.2012)

It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.

Great design, will last a lifetime (04.01.2014)

All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.

What was looking for (29.11.2016)

Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory

Much needed upgrade (20.02.2017)

Solid replacement for the flimsy plastic and far too small original release.

Easy to swap out and SOLID.

Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.

A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.

Works well, but dimensions are small. (05.09.2018)

Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.

Lire 12 plus d'avis sur brownells.com

24.9 24.9 1 CHF

Référence: 746122100
RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Ref Fabricant: NONE Étend la moitié un pouce hors plus loin que la sortie d'usine « RAS » n'est plus facile de frapper et de fonctionner lorsque vous êtes pressé de changer des magazines. Forme mince et compacte ne vous pousser dans le dos si vous portez votre fusil dans une écharpe. Installe sans armurerie.

24.9 CHF 22 CHF 24.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: Ruger Modèle: 10/22

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: Ruger Modèle: 10/22 Poids du colis: 0.023kg Hauteur d'expédition: 13mm Largeur d'expédition: 18mm Longueur d'expédition: 94mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Compact Shape Is Faster To Hit; Won't Get In The Way

SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.

Plus...

Forme compacte est plus rapide à Hit ; N'obtiendrez pas de la manière

Spécifications : acier CM, bleu ou acier inoxydable, fini de mat. Étend. 430"(11mm) du fond du receveur.

Plus...

Évaluations client de RANCH PRODUCTS BLUE EXTENDED MAG RELEASE

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.3

10/22 SS Ext. Mag Release (02.10.2011)

Work's great (10.04.2010)

Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.

Size is decieving (28.08.2010)

When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.

Very good for older 10/22's (10.09.2010)

Working as expected (02.02.2011)

Easy to install and works like expected.

vast improvement over stock mag. release (18.06.2011)

This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.

Greatly eases releasing a magazine (19.10.2011)

Great product! (13.06.2012)

It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.

Great design, will last a lifetime (04.01.2014)

What was looking for (29.11.2016)

Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory

Much needed upgrade (20.02.2017)

Works well, but dimensions are small. (05.09.2018)

Lire 12 plus d'avis sur brownells.com

Poursuivre vos achats

POWER CUSTOM 10/22® EXTENDED BOLT RELEASE, TITANIUM
RUGER® 10/22® EXTENDED BOLT RELEASE

POWER CUSTOM

En stock

CHF 28.90 *

Extracteurs

TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
RUGER® 10/22® SHOCK BUFFER

TACTICAL SOLUTIONS, LLC

Récommandé

CHF 12.90 *

2.6

BRAVO COMPANY M-LOK BCMGUNFIGHTER SHORT VERTICAL GRIP POLYMER BLACK
M-LOK BCMGUNFIGHTER SHORT VERTICAL GRIP

BRAVO COMPANY

Récommandé

CHF 34.90 *

Poignées Verticales

3.3

OPSOL MINI-CLIP 2.0 FLEX MINI SHELL ADAPTER
OPSOL MINI-CLIP 2.0 FLEX

OPSOL

En stock

CHF 26.90 *

Inserts Receiver

CLARK CUSTOM CLARK RUGER® 10/22® SPEED BOLT RELEASE
RUGER® 10/22® SPEED BOLT RELEASE

CLARK CUSTOM

En stock

CHF 33.90 *

4.8

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.