Upgrade Your Factory Sights With Easy-To-See, Fiber Optics
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight.
SPECS: Aluminum, black anodized. Front - .530" high, 1⁄16" red fiber optic bead. Fits Ruger 10/22 only.
Plus...
Mise à jour de vos sites d'usine avec facile-à-voir, fibre optique
Tous les jeux disposent d’un rouge vif, fibre optique, guidon et peep entièrement réglable ou entaille en U, cran de mire. Entaille en U, ensembles de cran de mire utilisent le modèle très précis et à 3 points avec deux points optiques de fibre verte, à l’arrière pour l’acquisition de vue rapide dans toutes les conditions de luminosité et de contraste. Aucun perçage ou taraudage requis pour la plupart des modèles de fusil. Queue d’aronde avant et arrière sites peuvent exiger raccord mineur. Haute visibilité, vite pour pickup, systèmes de vision pour le Ruger® 10/22®. WGRS caractéristiques demi-hauteur, récepteur de guide, oeilleton et rouge, fibre optique, guidon.
Spécifications : aluminium, anodisé noir. Avant -. 530" de haut, 1 ⁄ 16" perle optiques de fibre rouge. S’inscrit la Ruger 10/22 seulement.
Plus...
Évaluations client de WILLIAMS GUN SIGHT RUGER® 10/22® FIBER OPTIC WGRS-RU22 FIRE SIGHTS RED
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.3
Great sight replacement(18.10.2009)
The rear peep combined with the front fiber optic are great for aging eyes when standard sights just don't stand out well enough. Instalation was easy. The hardest part was getting the 10/22 factory front sight out. Just required extra tapping to drift it out. The rear peep is adjustable for windage and elevation by separate screws.
good value(14.03.2010)
These are great sights for older eyes that have trouble picking up the fine Ruger sights. But the screws on my sight come loose easily. Not the base but the screws for adjustment of the peep. Usually with less than fifty rounds fired. The screws are very fine for teflon tape and I don't want to locktite them. Otherwise an improvement over factory sights.
Fire Sights with rear peep aperture(05.05.2010)
My 10-22 used to sit in the gun cabinet most of the time with its awful stock open sights. The first try with these Williams fire sights I was knocking out the center of the target at 50yds with tight groups. The elevation and windage set screw loosened up, however within 30 rounds, just like a previous reviewer described. I think it needs a little blue loctite 246 on the threads just to help it out. Really had to wail on the stock 10-22 sights to remove them. Good idea to use a brass drift, and clamp and support the stock to a sturdy bench to prevent damage to the rifle.
Williams Aperature site.(11.04.2011)
Set screw in dovetail broke off putting in gun case after first range session. Horrible site. Not recommended.
Good plinking sight(22.07.2012)
Bright fast sight. Covers a lot of small varmint targets. Great sight picture but the set screws loosened and I lost the peep assembly. I will buy another and glue all the set screws at sighting in.
"Cheap design"(28.10.2013)
Easy enough to install and the peep with the firesight is easier to see,however after about 15 rounds the rear sight fell off. I even used locktite. The dovetail is not closely enough machined. I ended up using JB weld after I set the sights on target. There will no longer be any adjustment but it's not falling off. It's fine for my bugout Ruger 10/22 takedown.
Excellent Sights(17.01.2015)
These sights are excellent! They are very easy to install, and to address some of the problems encountered in earlier reviews, let's get back to basics. When removing a dovetailed sight, front or left...drift from left to right, and instal from right to left. When putting screws in to mount any sights install them with purple LocTight. (It's made for this purpose. If you are having trouble with the adjustment screws losing, install them with beeswax. To the one fellow who said that the mounting screw broke off...do not over-tighten, and you will be fine. In short these are well made sights, and deserve a good rating.
Référence: 962633300 WILLIAMS GUN SIGHT RUGER® 10/22® FIBER OPTIC WGRS-RU22 FIRE SIGHTS RED Ref Fabricant: 63330053506633302 Tous les jeux disposent d’un rouge vif, fibre optique, guidon et peep entièrement réglable ou entaille en U, cran de mire. Entaille en U, ensembles de cran de mire utilisent le modèle très précis et à 3 points avec deux points optiques de fibre verte, à l’arrière pour l’acquisition de vue rapide dans toutes les conditions de luminosité et de contraste. Aucun perçage ou taraudage requis pour la plupart des modèles de fusil. Queue d’aronde avant et arrière sites peuvent exiger raccord mineur. Haute visibilité, vite pour pickup, systèmes de vision pour le Ruger® 10/22®. WGRS caractéristiques demi-hauteur, récepteur de guide, oeilleton et rouge, fibre optique, guidon.
69.9CHF3CHF 69.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Upgrade Your Factory Sights With Easy-To-See, Fiber Optics
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight.
SPECS: Aluminum, black anodized. Front - .530" high, 1⁄16" red fiber optic bead. Fits Ruger 10/22 only.
Plus...
Mise à jour de vos sites d'usine avec facile-à-voir, fibre optique
Tous les jeux disposent d’un rouge vif, fibre optique, guidon et peep entièrement réglable ou entaille en U, cran de mire. Entaille en U, ensembles de cran de mire utilisent le modèle très précis et à 3 points avec deux points optiques de fibre verte, à l’arrière pour l’acquisition de vue rapide dans toutes les conditions de luminosité et de contraste. Aucun perçage ou taraudage requis pour la plupart des modèles de fusil. Queue d’aronde avant et arrière sites peuvent exiger raccord mineur. Haute visibilité, vite pour pickup, systèmes de vision pour le Ruger® 10/22®. WGRS caractéristiques demi-hauteur, récepteur de guide, oeilleton et rouge, fibre optique, guidon.
Spécifications : aluminium, anodisé noir. Avant -. 530" de haut, 1 ⁄ 16" perle optiques de fibre rouge. S’inscrit la Ruger 10/22 seulement.
Plus...
Évaluations client de WILLIAMS GUN SIGHT RUGER® 10/22® FIBER OPTIC WGRS-RU22 FIRE SIGHTS RED
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.3
Great sight replacement(18.10.2009)
The rear peep combined with the front fiber optic are great for aging eyes when standard sights just don't stand out well enough. Instalation was easy. The hardest part was getting the 10/22 factory front sight out. Just required extra tapping to drift it out. The rear peep is adjustable for windage and elevation by separate screws.
good value(14.03.2010)
These are great sights for older eyes that have trouble picking up the fine Ruger sights. But the screws on my sight come loose easily. Not the base but the screws for adjustment of the peep. Usually with less than fifty rounds fired. The screws are very fine for teflon tape and I don't want to locktite them. Otherwise an improvement over factory sights.
Fire Sights with rear peep aperture(05.05.2010)
My 10-22 used to sit in the gun cabinet most of the time with its awful stock open sights. The first try with these Williams fire sights I was knocking out the center of the target at 50yds with tight groups. The elevation and windage set screw loosened up, however within 30 rounds, just like a previous reviewer described. I think it needs a little blue loctite 246 on the threads just to help it out. Really had to wail on the stock 10-22 sights to remove them. Good idea to use a brass drift, and clamp and support the stock to a sturdy bench to prevent damage to the rifle.
Williams Aperature site.(11.04.2011)
Set screw in dovetail broke off putting in gun case after first range session. Horrible site. Not recommended.
Good plinking sight(22.07.2012)
Bright fast sight. Covers a lot of small varmint targets. Great sight picture but the set screws loosened and I lost the peep assembly. I will buy another and glue all the set screws at sighting in.
"Cheap design"(28.10.2013)
Easy enough to install and the peep with the firesight is easier to see,however after about 15 rounds the rear sight fell off. I even used locktite. The dovetail is not closely enough machined. I ended up using JB weld after I set the sights on target. There will no longer be any adjustment but it's not falling off. It's fine for my bugout Ruger 10/22 takedown.
Excellent Sights(17.01.2015)
These sights are excellent! They are very easy to install, and to address some of the problems encountered in earlier reviews, let's get back to basics. When removing a dovetailed sight, front or left...drift from left to right, and instal from right to left. When putting screws in to mount any sights install them with purple LocTight. (It's made for this purpose. If you are having trouble with the adjustment screws losing, install them with beeswax. To the one fellow who said that the mounting screw broke off...do not over-tighten, and you will be fine. In short these are well made sights, and deserve a good rating.