Cushions Slide Impact For Less Wear & Reduced Felt Recoil
Polyurethane buffer cushions the impact of the slide against the frame during recoil, resulting in less wear to the gun, less fatigue on the hand and arm, and less muzzle rise. Reduces felt recoil so you can get back on target quickly for faster, more accurate follow-up shots. Each buffer is precision CNC cut from a sheet of ultra-tough, tear-resistant polyurethane. Drop-in installation without any permanent alteration to the firearm.
SPECS: Polyurethane, clear.
Altro...
Cuscini scivolare impatto per meno usura & ridotto rinculo Felt
Tampone in poliuretano ammortizza l'impatto del vetrino contro il telaio durante il rinculo, con conseguente minore usura alla pistola, meno fatica sulla mano e il braccio e meno luogo museruola. Riduce il rinculo felt così può tornare sul bersaglio rapidamente per colpi di follow-up più veloce, più precisi. Ogni tampone è precisione che CNC taglio da una lastra di poliuretano ultra-resistente, strappare-resistente. Installazione di drop-in senza nessuna alterazione permanente all'arma. Modelli disponibili per adattarsi pistole Beretta 92 e Glock.
"GLOCK" è un marchio registrato federale di Glock, Inc. ed è uno dei molti marchi di proprietà di Glock, Inc o Glock Ges. Brownells è un rivenditore indipendente di parti e accessori per pistole Glock ® e non è affiliato o avallato da Glock, Inc o Glock Ges. l'uso di Glock in questa pagina è solo per pubblicizzare la vendita di Glock parti o componenti. come indicato nelle descrizioni prodotto , non tutte le parti e accessori, su questo sito sono prodotti ufficiali Glock.
Specifiche: poliuretano, chiara.
Altro...
Punteggi dei clienti per BIANCO RECOIL BUFFER FOR GLOCK®
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.6
Less wear and just as reliable.(15.02.2010)
I have two of these installed in different Beretta 92 models, one on a plastic guide rod and the other metal. I am nearing a thousand rounds on one and have not had any failures at all. These protect your frame from being battered by the slide and should in theory greatly increase the life of your pistol. Even if you are heistant to use them on a defensive pistol, they are so easy to install it can be put in for every range session.
Should work as advertised(02.04.2012)
It installed very easily, self centered and takes the 'slam' of metal on metal out of the action noticably. Even when hand cycling! And Brownells shipping dept. rocks!! I got this, and my last order, in two days on parcel post!!
Easily applied and installed quickly.(16.04.2012)
Looking forward to shooting it, fit well and easy.
O.K. product(01.08.2012)
The buffer moves along the guide rod, it doesn't stay put. You'll notice a positive difference when cycling the receiver, you won't feel metal on metal. But if the piece fails (breaks) during the firing process what'll happen?
Works as promised(10.05.2017)
It requires a bit of extra care when field stripping and reassembling to make sure it goes in correctly, but once installed it definitely reduces the metal on metal impact, cycles fine, and seems like a great idea to lengthen the life of your pistol. Thousands of rounds fired no issues.
N. prodotto: 100004730 BIANCO RECOIL BUFFER FOR GLOCK® Parti Fabbricante: NONE Tampone in poliuretano ammortizza l'impatto del vetrino contro il telaio durante il rinculo, con conseguente minore usura alla pistola, meno fatica sulla mano e il braccio e meno luogo museruola. Riduce il rinculo felt così può tornare sul bersaglio rapidamente per colpi di follow-up più veloce, più precisi. Ogni tampone è precisione che CNC taglio da una lastra di poliuretano ultra-resistente, strappare-resistente. Installazione di drop-in senza nessuna alterazione permanente all'arma. Modelli disponibili per adattarsi pistole Beretta 92 e Glock.
14.9CHF1CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Glock
Modello:
Universal Handguns
Peso della spedizione: 0.005kgAltezza di spedizione: 1mmLarghezza di spedizione: 25mmLunghezza di spedizione: 25mm
Cushions Slide Impact For Less Wear & Reduced Felt Recoil
Polyurethane buffer cushions the impact of the slide against the frame during recoil, resulting in less wear to the gun, less fatigue on the hand and arm, and less muzzle rise. Reduces felt recoil so you can get back on target quickly for faster, more accurate follow-up shots. Each buffer is precision CNC cut from a sheet of ultra-tough, tear-resistant polyurethane. Drop-in installation without any permanent alteration to the firearm.
SPECS: Polyurethane, clear.
Altro...
Cuscini scivolare impatto per meno usura & ridotto rinculo Felt
Tampone in poliuretano ammortizza l'impatto del vetrino contro il telaio durante il rinculo, con conseguente minore usura alla pistola, meno fatica sulla mano e il braccio e meno luogo museruola. Riduce il rinculo felt così può tornare sul bersaglio rapidamente per colpi di follow-up più veloce, più precisi. Ogni tampone è precisione che CNC taglio da una lastra di poliuretano ultra-resistente, strappare-resistente. Installazione di drop-in senza nessuna alterazione permanente all'arma. Modelli disponibili per adattarsi pistole Beretta 92 e Glock.
"GLOCK" è un marchio registrato federale di Glock, Inc. ed è uno dei molti marchi di proprietà di Glock, Inc o Glock Ges. Brownells è un rivenditore indipendente di parti e accessori per pistole Glock ® e non è affiliato o avallato da Glock, Inc o Glock Ges. l'uso di Glock in questa pagina è solo per pubblicizzare la vendita di Glock parti o componenti. come indicato nelle descrizioni prodotto , non tutte le parti e accessori, su questo sito sono prodotti ufficiali Glock.
Specifiche: poliuretano, chiara.
Altro...
Punteggi dei clienti per BIANCO RECOIL BUFFER FOR GLOCK®
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.6
Less wear and just as reliable.(15.02.2010)
I have two of these installed in different Beretta 92 models, one on a plastic guide rod and the other metal. I am nearing a thousand rounds on one and have not had any failures at all. These protect your frame from being battered by the slide and should in theory greatly increase the life of your pistol. Even if you are heistant to use them on a defensive pistol, they are so easy to install it can be put in for every range session.
Should work as advertised(02.04.2012)
It installed very easily, self centered and takes the 'slam' of metal on metal out of the action noticably. Even when hand cycling! And Brownells shipping dept. rocks!! I got this, and my last order, in two days on parcel post!!
Easily applied and installed quickly.(16.04.2012)
Looking forward to shooting it, fit well and easy.
O.K. product(01.08.2012)
The buffer moves along the guide rod, it doesn't stay put. You'll notice a positive difference when cycling the receiver, you won't feel metal on metal. But if the piece fails (breaks) during the firing process what'll happen?
Works as promised(10.05.2017)
It requires a bit of extra care when field stripping and reassembling to make sure it goes in correctly, but once installed it definitely reduces the metal on metal impact, cycles fine, and seems like a great idea to lengthen the life of your pistol. Thousands of rounds fired no issues.