The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. The Vickers Elite Battlesight is available with plain black serrated rear blades and your choice of black serrated, green/red fiber optic or tritium front sight styles. The high profile of the Vickers Elite Battlesight allows the use of a taller front sight and deeper rear notch for better sight tracking during high speed shooting situations. NOTE: Sights may require minor fitting. The Vickers Elite Glock® Sight set requires the use of a .245”tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Plus...
La visibilité arrière Vickers Elite Battlesight a un. 145" large et profonde entaille en U pour optimum de visée en faible luminosité, de dynamique gamme conditions et correspond parfaitement à nos. 125" curiosités avant large. La lame arrière anti-reflet concave est dentelés 40 lignes par pouce, tandis que la zone de l'encoche est encastrée dans une poche semi-circulaire pour une image nette et protégée. Deux vis durcis assurent que ce spectacle ne tirera jamais lâche sous les conditions les plus exigeantes. Cette mire accroc-libre a aussi une forme de tablette qui permet de glisser une main vélo ou dysfonctionnement cote et un parkerized noir mat anti-reflet, robuste, finition. Le Vickers Elite Battlesight est disponible avec plaines noirs lames arrière dentelés et votre choix de styles de noir dentelées, vert/rouge de fibres optiques ou tritium de guidon. La visibilité de la Vickers Elite Battlesight permet l'utilisation d'un guidon plus haut et plus profonde encoche arrière pour une meilleure vision de suivi au cours de la grande vitesse des situations de tir. Remarque : Les sites peuvent nécessiter raccord mineur. Le Vickers Elite Glock ® vue ensemble nécessite l'utilisation d'un.245" haut guidon pour tous les pistolets Glock ® de calibre à l'exception de.45 ACP et 10 mm, ce qui nécessitera généralement la. 230" guidon.
« GLOCK » est une marque déposée par le gouvernement fédéral de Glock, Inc. et est l'une des nombreuses marques de Glock, Inc. ou Glock Ges.m.b.H. Brownells est un revendeur indépendant de pièces et accessoires pour les pistolets Glock ® et n'est pas affilié à ou approuvés par Glock, Inc. ou Glock Ges.m.b.H. l'utilisation de Glock sur cette page ne sert qu'à annoncer la vente de pièces de Glock ou composants. comme il est indiqué dans les descriptions de produit , pas toutes les pièces et accessoires sur ce site sont des produits officiels de Glock.
Plus...
Évaluations client de WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK , TRITIUM DOT
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 4
AMAZING(06.10.2015)
BEST REAR SIGHT FOR GLOCK ON THE MARKET.
another great product offering from wilson combat and vickers tactical. Well made sight only downfall is the fitting to the slide. Sight picture to me is perfect, and this set up is used on my EDC.
Great sight,terrible front sight recomme(06.11.2015)
First let me say I love how this rear sight makes your front sight pop out. The u notch really forces you to focus on the front sight.
Everything is great about the rear sight except for the front sight recommendations for sight height. I'm running this on a Glock 20 and with the .230" recommended front sight. The firearm shoots approximately 2" low at 15 yards from POA. My brother is having similar issues running the suggested front sight on his Glock 19.
I ordered a .220" front sight to hopefully correct the POA/POI error.
Allen screws strip easily(24.01.2016)
Good sight. The u notch draws the eye to the front bead, and there's good light on each side for quick aiming. Definitely a combat sight-not a target sight. My only beef is that the set screw Allen heads striped easily. Be careful, just tight enough is ample. That's why I'm buying a second one. Would rather the 10-8 sights for the glock but they're back ordered
Great sight! (02.05.2016)
I have used Warren's, Dawson's, Trijicon's, Ameriglo's and Truglo's for shooting USPSA, IDPA and on duty (before I retired) and after using this sight for a number of competitions it is my new favorite. A word of caution, the recommend front sight height didn't work for me. On my Glock 17 I used a .115 X .215 Warren fiber optic front sight which gave me POA/POI at 25 yards with my handloads. Your mileage may vary.
Quality(11.10.2016)
I've been running this sight for 1yr and I love it! I have always loved blackout rear sights paired with the tritium front sight It works well as my EDC with no issues
HANGS OVER REAR OF SLIDE(18.11.2016)
Helps to align the sights quickly. No glare on rear sight because of rear serrations. Over hangs the rear of Gen 4 G34 about a 1/8 inch.
Great for competition or target shooting.
Would not use for carry pistol due to the over hang could cause snagging.
Référence: 965000368 WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK , TRITIUM DOT Ref Fabricant: 669T874218009410 La visibilité arrière Vickers Elite Battlesight a un. 145" large et profonde entaille en U pour optimum de visée en faible luminosité, de dynamique gamme conditions et correspond parfaitement à nos. 125" curiosités avant large. La lame arrière anti-reflet concave est dentelés 40 lignes par pouce, tandis que la zone de l'encoche est encastrée dans une poche semi-circulaire pour une image nette et protégée. Deux vis durcis assurent que ce spectacle ne tirera jamais lâche sous les conditions les plus exigeantes. Cette mire accroc-libre a aussi une forme de tablette qui permet de glisser une main vélo ou dysfonctionnement cote et un parkerized noir mat anti-reflet, robuste, finition. Le Vickers Elite Battlesight est disponible avec plaines noirs lames arrière dentelés et votre choix de styles de noir dentelées, vert/rouge de fibres optiques ou tritium de guidon. La visibilité de la Vickers Elite Battlesight permet l'utilisation d'un guidon plus haut et plus profonde encoche arrière pour une meilleure vision de suivi au cours de la grande vitesse des situations de tir. Remarque : Les sites peuvent nécessiter raccord mineur. Le Vickers Elite Glock ® vue ensemble nécessite l'utilisation d'un.245" haut guidon pour tous les pistolets Glock ® de calibre à l'exception de.45 ACP et 10 mm, ce qui nécessitera généralement la. 230" guidon.
104.9CHF0CHF 104.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques:Couleur de Visée: VertManufacture: GlockStyle: Fixe
The high profile Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. The Vickers Elite Battlesight is available with plain black serrated rear blades and your choice of black serrated, green/red fiber optic or tritium front sight styles. The high profile of the Vickers Elite Battlesight allows the use of a taller front sight and deeper rear notch for better sight tracking during high speed shooting situations. NOTE: Sights may require minor fitting. The Vickers Elite Glock® Sight set requires the use of a .245”tall front sight for all caliber Glock® pistols except for .45 ACP and 10mm which will typically require the .230” front sight.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Plus...
La visibilité arrière Vickers Elite Battlesight a un. 145" large et profonde entaille en U pour optimum de visée en faible luminosité, de dynamique gamme conditions et correspond parfaitement à nos. 125" curiosités avant large. La lame arrière anti-reflet concave est dentelés 40 lignes par pouce, tandis que la zone de l'encoche est encastrée dans une poche semi-circulaire pour une image nette et protégée. Deux vis durcis assurent que ce spectacle ne tirera jamais lâche sous les conditions les plus exigeantes. Cette mire accroc-libre a aussi une forme de tablette qui permet de glisser une main vélo ou dysfonctionnement cote et un parkerized noir mat anti-reflet, robuste, finition. Le Vickers Elite Battlesight est disponible avec plaines noirs lames arrière dentelés et votre choix de styles de noir dentelées, vert/rouge de fibres optiques ou tritium de guidon. La visibilité de la Vickers Elite Battlesight permet l'utilisation d'un guidon plus haut et plus profonde encoche arrière pour une meilleure vision de suivi au cours de la grande vitesse des situations de tir. Remarque : Les sites peuvent nécessiter raccord mineur. Le Vickers Elite Glock ® vue ensemble nécessite l'utilisation d'un.245" haut guidon pour tous les pistolets Glock ® de calibre à l'exception de.45 ACP et 10 mm, ce qui nécessitera généralement la. 230" guidon.
« GLOCK » est une marque déposée par le gouvernement fédéral de Glock, Inc. et est l'une des nombreuses marques de Glock, Inc. ou Glock Ges.m.b.H. Brownells est un revendeur indépendant de pièces et accessoires pour les pistolets Glock ® et n'est pas affilié à ou approuvés par Glock, Inc. ou Glock Ges.m.b.H. l'utilisation de Glock sur cette page ne sert qu'à annoncer la vente de pièces de Glock ou composants. comme il est indiqué dans les descriptions de produit , pas toutes les pièces et accessoires sur ce site sont des produits officiels de Glock.
Plus...
Évaluations client de WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR GLOCK , TRITIUM DOT
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 4
AMAZING(06.10.2015)
BEST REAR SIGHT FOR GLOCK ON THE MARKET.
another great product offering from wilson combat and vickers tactical. Well made sight only downfall is the fitting to the slide. Sight picture to me is perfect, and this set up is used on my EDC.
Great sight,terrible front sight recomme(06.11.2015)
First let me say I love how this rear sight makes your front sight pop out. The u notch really forces you to focus on the front sight.
Everything is great about the rear sight except for the front sight recommendations for sight height. I'm running this on a Glock 20 and with the .230" recommended front sight. The firearm shoots approximately 2" low at 15 yards from POA. My brother is having similar issues running the suggested front sight on his Glock 19.
I ordered a .220" front sight to hopefully correct the POA/POI error.
Allen screws strip easily(24.01.2016)
Good sight. The u notch draws the eye to the front bead, and there's good light on each side for quick aiming. Definitely a combat sight-not a target sight. My only beef is that the set screw Allen heads striped easily. Be careful, just tight enough is ample. That's why I'm buying a second one. Would rather the 10-8 sights for the glock but they're back ordered
Great sight! (02.05.2016)
I have used Warren's, Dawson's, Trijicon's, Ameriglo's and Truglo's for shooting USPSA, IDPA and on duty (before I retired) and after using this sight for a number of competitions it is my new favorite. A word of caution, the recommend front sight height didn't work for me. On my Glock 17 I used a .115 X .215 Warren fiber optic front sight which gave me POA/POI at 25 yards with my handloads. Your mileage may vary.
Quality(11.10.2016)
I've been running this sight for 1yr and I love it! I have always loved blackout rear sights paired with the tritium front sight It works well as my EDC with no issues
HANGS OVER REAR OF SLIDE(18.11.2016)
Helps to align the sights quickly. No glare on rear sight because of rear serrations. Over hangs the rear of Gen 4 G34 about a 1/8 inch.
Great for competition or target shooting.
Would not use for carry pistol due to the over hang could cause snagging.