Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

WILSON COMBAT
VICKERS ELITE BATTLESIGHT FOR M&P®

811826022172 965000262
The high-profile Vickers Elite Battlesight for the Smith & Wesson M&P® has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave, non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. A hardened set-screw ensures this sight will never shoot loose under the most demanding conditions.  This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. NOTE: Sights may require minor fitting and may not be returned after installation. The Vickers Elite Smith & Wesson M&P® Sight set requires the use of a .165” tall front sight for all barrel lengths/calibers (9mm, .40, .357, 45 ACP) except for Smith & Wesson M&P® PRO/longside versions that use the .180” height. Because of factory variances, sights may require minor fitting and may not be returned after installation. Not compatible with the S&W Shield® pistol. Wilson Combat Vickers S&W M&P rear sights are not compatible with factory M&P Pro C.O.R.E (Competition Optics Ready Equipment) slide models due to the rearward relocation of the sight dovetail position.
0 0 1 CHF
Artikel-Nr.: 965000262
WILSON COMBAT VICKERS ELITE BATTLESIGHT FOR S&W M&P, TRITIUM
Herstellerproduktnummer: 761T 811826022172 Das hochkarätige Vickers Elite Battlesight für das Smith & Wesson M & P® verfügt über eine 45-Zoll-breite, tiefe U-Kerbe für optimale Sicht bei schlechten Lichtverhältnissen und dynamischem Bereich und passt perfekt zu unseren 125-Zoll-Weitkornvisieren. Die konkave, nicht reflektierende hintere Klinge hat eine Verzahnung von 40 Linien pro Zoll, während der Kerbbereich in eine halbrunde Tasche eingelassen ist, um ein klares, geschütztes Sichtbild zu erhalten. Eine gehärtete Stellschraube stellt sicher, dass sich dieses Visier unter den schwierigsten Bedingungen niemals löst. Dieses störungsfreie Visier hat auch eine Regalform, die eine Einhand-Rutschbewegung oder Fehlfunktionsbeseitigung ermöglicht, und ein robustes, nicht reflektierendes mattschwarzes Parker-Finish. HINWEIS: Sehenswürdigkeiten erfordern möglicherweise eine geringfügige Anpassung und können nach der Installation möglicherweise nicht zurückgesandt werden. Das Vickers Elite Smith & Wesson M & P® Visierset erfordert die Verwendung eines .165 ”-Hochkorns für alle Lauflängen / Kaliber (9 mm, .40, .357, 45 ACP) mit Ausnahme der Smith & Wesson M & P® PRO / Longside-Versionen die die .180 "Höhe verwenden. Aufgrund von Fabrikabweichungen müssen die Visiere möglicherweise geringfügig angepasst werden und können nach der Installation möglicherweise nicht zurückgesandt werden. Nicht kompatibel mit der S & W Shield® Pistole. Wilson Combat Vickers M & P-Visiere von S & W sind nicht mit den werkseitigen M & P Pro C.O.R.E-Gleitmodellen (Competition Optics Ready Equipment) kompatibel, da die Schwalbenschwanzposition nach hinten verschoben wurde.
Benachrichtigt werden, sobald verfügbar? Hier klicken
Nicht verfügbar.
Eigenschaften: Art: U-Notch Farbe der Visierung: Green Hersteller/Modell: Smith & Wesson Modell: M&P

Eigenschaften

Art: U-Notch Farbe der Visierung: Green Hersteller/Modell: Smith & Wesson Modell: M&P Versandgewicht: 0.018kg Versandhöhe: 6mm Versandbreite: 76mm Versandlänge: 114mm

Artikeldetails

Made in USA



The high-profile Vickers Elite Battlesight for the Smith & Wesson M&P® has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave, non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. A hardened set-screw ensures this sight will never shoot loose under the most demanding conditions.  This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. NOTE: Sights may require minor fitting and may not be returned after installation. The Vickers Elite Smith & Wesson M&P® Sight set requires the use of a .165” tall front sight for all barrel lengths/calibers (9mm, .40, .357, 45 ACP) except for Smith & Wesson M&P® PRO/longside versions that use the .180” height. Because of factory variances, sights may require minor fitting and may not be returned after installation. Not compatible with the S&W Shield® pistol. Wilson Combat Vickers S&W M&P rear sights are not compatible with factory M&P Pro C.O.R.E (Competition Optics Ready Equipment) slide models due to the rearward relocation of the sight dovetail position.
Newsletter