For Secure Installation Of Almost Any Rifle Buttstock
Convenient kit contains all the components needed to mount the buttstock of your choice on an AR-15 rifle. Perfect for stock conversions such as altering a rifle to accept a fixed rifle stock. All parts are manufactured from the highest quality materials and held to strict dimensional tolerances for proper fit and function. A2 rifle kit adds to A1 kit contents the correct buttstock spacer required for A2 rifle stocks.
Pour une Installation sécurisée de presque n'importe quel crosse de fusil
Kit pratique contient tous les composants nécessaires pour monter la crosse de votre choix sur un fusil AR-15. Parfait pour les conversions de stock comme modification d’un fusil pour accepter une crosse fixe. Toutes les pièces sont fabriquées à partir de matériaux haut de gamme et qui s’est tenues à des tolérances dimensionnelles strictes pour l’ajustement approprié et de la fonction. Kit carabine a2 ajoute au contenu du kit A1 l’entretoise de crosse correcte exigée pour les stocks de fusil A2.
SPÉCIFICATIONS : récepteur Extension & A2 Stock entretoise – aluminium, anodisé, noir mat. Tampon de recul – aluminium et acier. Ressort, anneau de verrouillage, plaque réceptrice – acier. Kits fit standard, mil-spec receveur inférieur AR-15/M16/M4 et clones. Instructions d’installation fournies.
Plus...
Évaluations client de BROWNELLS A2 RIFLE STOCK COMPLETION KIT
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 4.4
Perfect(26.10.2009)
I bought this to mount my Magpul PRS stock. Assembled easily and with a nice fit. All of the parts were DPMS except the spring. Great buy.
Super priced product.(12.11.2009)
Easy to install. [...] Parts are exremely durable and made to last.
Excellent stuff!(14.04.2011)
I mounted this kit to Doublestar lower receiver and had no trouble whatsoever. Excellent product.
Great kit, don't hessitate, get it.(15.05.2012)
Only thing I would add is a warning about the buffer retainer and spring getting loose as you unscrew the tube. I was busy watching the takedown pin detent spring when the buffer retainer escaped. Spending quality time on the basement floor with a magnet looking for a spring isn't much fun.
Not really complete kit for all stocks(13.07.2012)
I purchased this kit to install a CAA SRS on my SPR 5.56 that came with an adjustable stock. The carbine stocks uses a backplate that has a tab which keeps it from rotating once the buffer tube is installed. The tube on the A2 conversion kit lacks such groove.
The threads on the A2 tube are also perfect to hold the pin that keeps the buffer from coming out. Once a backplate is added, the tube can't hold the pin. I must admit I have not tested the pin retention but measuring the width of the plate, the pin will barely touch the tube.
I'm still researching how (if) to use this but by no means this is an easy conversion or all inclusive kit for all applications.
Works Great(31.08.2012)
Installed this kit on multiple ARs. Works with standard A2 stock and MagPul PRS. Should work fine with any stock designed to use the A2 receiver extension/buffer tube.
Not sure why other reviewer had issues with installation. Sounds like they tried to use the carbine lock with the A2 tube -- this tube doesn't use a lock plate. Use assembly lube on threads and torque to correct specs.
Good kit(13.11.2012)
This kit is pretty good for the money. Heavy parts, built pretty strongly. They fit well. My only gripe is that it doesn't come with a castle nut wrench, which would have made my stock changing experience easier.
Good to go(11.09.2013)
Bought this for my precision AR build to go under a Magpul PRS Stock. Good quality, it went on easily, instructions were provided, and I'm happy with it. I'll be replacing the recoil spring with a flat wire spring (Hate the Spoooiiiinnnnggggg), but other than that it's good at what it does.
Great buy(07.03.2018)
Used this kit to replace an adjustable stock with a skeleton stock. Could not have been easier. Remember, when removing the stocks plate of an adjustable stock, that there is a spring back there and the buffer retaining spring is held in by the buffer tube. The buffer tube easily threads on and holds the retaining spring and you do not need to use a wrench to tighten the tube because the stock will hold it secure once installed. Your choice. I have bought two of these kits now and have no issues with either.
Référence: 080000554 BROWNELLS A2 RIFLE STOCK COMPLETION KIT050806108592 Kit pratique contient tous les composants nécessaires pour monter la crosse de votre choix sur un fusil AR-15. Parfait pour les conversions de stock comme modification d’un fusil pour accepter une crosse fixe. Toutes les pièces sont fabriquées à partir de matériaux haut de gamme et qui s’est tenues à des tolérances dimensionnelles strictes pour l’ajustement approprié et de la fonction. Kit carabine a2 ajoute au contenu du kit A1 l’entretoise de crosse correcte exigée pour les stocks de fusil A2.
114.9CHF0CHF 114.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
For Secure Installation Of Almost Any Rifle Buttstock
Convenient kit contains all the components needed to mount the buttstock of your choice on an AR-15 rifle. Perfect for stock conversions such as altering a rifle to accept a fixed rifle stock. All parts are manufactured from the highest quality materials and held to strict dimensional tolerances for proper fit and function. A2 rifle kit adds to A1 kit contents the correct buttstock spacer required for A2 rifle stocks.
Pour une Installation sécurisée de presque n'importe quel crosse de fusil
Kit pratique contient tous les composants nécessaires pour monter la crosse de votre choix sur un fusil AR-15. Parfait pour les conversions de stock comme modification d’un fusil pour accepter une crosse fixe. Toutes les pièces sont fabriquées à partir de matériaux haut de gamme et qui s’est tenues à des tolérances dimensionnelles strictes pour l’ajustement approprié et de la fonction. Kit carabine a2 ajoute au contenu du kit A1 l’entretoise de crosse correcte exigée pour les stocks de fusil A2.
SPÉCIFICATIONS : récepteur Extension & A2 Stock entretoise – aluminium, anodisé, noir mat. Tampon de recul – aluminium et acier. Ressort, anneau de verrouillage, plaque réceptrice – acier. Kits fit standard, mil-spec receveur inférieur AR-15/M16/M4 et clones. Instructions d’installation fournies.
Plus...
Évaluations client de BROWNELLS A2 RIFLE STOCK COMPLETION KIT
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 4.4
Perfect(26.10.2009)
I bought this to mount my Magpul PRS stock. Assembled easily and with a nice fit. All of the parts were DPMS except the spring. Great buy.
Super priced product.(12.11.2009)
Easy to install. [...] Parts are exremely durable and made to last.
Excellent stuff!(14.04.2011)
I mounted this kit to Doublestar lower receiver and had no trouble whatsoever. Excellent product.
Great kit, don't hessitate, get it.(15.05.2012)
Only thing I would add is a warning about the buffer retainer and spring getting loose as you unscrew the tube. I was busy watching the takedown pin detent spring when the buffer retainer escaped. Spending quality time on the basement floor with a magnet looking for a spring isn't much fun.
Not really complete kit for all stocks(13.07.2012)
I purchased this kit to install a CAA SRS on my SPR 5.56 that came with an adjustable stock. The carbine stocks uses a backplate that has a tab which keeps it from rotating once the buffer tube is installed. The tube on the A2 conversion kit lacks such groove.
The threads on the A2 tube are also perfect to hold the pin that keeps the buffer from coming out. Once a backplate is added, the tube can't hold the pin. I must admit I have not tested the pin retention but measuring the width of the plate, the pin will barely touch the tube.
I'm still researching how (if) to use this but by no means this is an easy conversion or all inclusive kit for all applications.
Works Great(31.08.2012)
Installed this kit on multiple ARs. Works with standard A2 stock and MagPul PRS. Should work fine with any stock designed to use the A2 receiver extension/buffer tube.
Not sure why other reviewer had issues with installation. Sounds like they tried to use the carbine lock with the A2 tube -- this tube doesn't use a lock plate. Use assembly lube on threads and torque to correct specs.
Good kit(13.11.2012)
This kit is pretty good for the money. Heavy parts, built pretty strongly. They fit well. My only gripe is that it doesn't come with a castle nut wrench, which would have made my stock changing experience easier.
Good to go(11.09.2013)
Bought this for my precision AR build to go under a Magpul PRS Stock. Good quality, it went on easily, instructions were provided, and I'm happy with it. I'll be replacing the recoil spring with a flat wire spring (Hate the Spoooiiiinnnnggggg), but other than that it's good at what it does.
Great buy(07.03.2018)
Used this kit to replace an adjustable stock with a skeleton stock. Could not have been easier. Remember, when removing the stocks plate of an adjustable stock, that there is a spring back there and the buffer retaining spring is held in by the buffer tube. The buffer tube easily threads on and holds the retaining spring and you do not need to use a wrench to tighten the tube because the stock will hold it secure once installed. Your choice. I have bought two of these kits now and have no issues with either.