Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling, tapping, or making permanent alterations to the gun. Remove the two trigger group pins (Rem.), or the ejector screw and trigger pin (Moss.), slide on the mount, line up the holes, and secure it with the included replacement pins. Low-profile, form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic, Weaver top-mount rings, or other accessory, with plenty of flexibility in setting eye relief. Lightweight, yet rugged, reinforced molded polymer stands up to extreme weather conditions ranging from -40°F to 150°F.
SPECS: Reinforced, injection-molded polymer composite, Black or Realtree Hardwoods HD Camo. Includes mount, button head ejector screw, trigger group bolt, knurled nut, threaded insert, nylon-tipped set screw, 3⁄32” and 1⁄8” hex head wrenches, and instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or left handed models. Mossberg fits 500, 835; 12 gauge only; right handed models only.
Altro...
Facile da installare, basso profilo vista Monte
Facile da installare Monte consente di allegare uno spettacolo ottico o laser al tuo fucile senza foratura, maschiatura o rendendo permanenti alterazioni alla pistola. Togliere i perni del gruppo di due trigger (REM), o il trigger e vite perno (Moss.), far scorrere sul Monte, allineare i fori e fissare con i perni di ricambio incluso. Design a basso profilo, forma-montaggio posizioni vista vicino all'asse del foro e si presenta come parte del ricevitore. Sette croce-slot in guida 5" consentono di installare un'ottica, anelli di cima-Monte Weaver o altro accessorio, con un sacco di flessibilità nell'impostazione pupillare. Leggero, ma robusto, armato modellato polimero stand fino a condizioni meteorologiche estreme che vanno da-40 ° F a 150 ° F.
Specifiche: composito polimerico rinforzato, stampato ad iniezione, nero o Realtree Hardwoods HD Camo. Comprende il Monte pulsante espulsore testa vite, bullone gruppo grilletto, dado zigrinato, inserto filettato, con punta in nylon vite, 3 ⁄ 32" e 1 ⁄ chiavi testa esagonale 8" e le istruzioni. Accoppiamenti di Remington 870, 1100, 11-87; 12 e 20 gauge; modelli di mani destra o sinistra. Accoppiamenti di Mossberg 500, 835; calibro 12 solo; solo modelli destri.
Altro...
Punteggi dei clienti per WEAVER MOSSBERG 500 12 GAUGE SADDLE MOUNT
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3.3
I would recommend this to anyone.(08.04.2011)
Simplicity is always a plus. There is a 3F standard by which to judge any product...Form, Fit, and Function. I would give high marks on all three for this item.
Well made but not a picatinni rail!(25.12.2014)
The mount is well made and is easy to install. The bad news (be aware!) is that, dispite the description, the rail doesn't match mil standard and so none of dozen red-dots I have (trijicon, eotech, aimpoint, vortex) can be installed on this rail. The good news is that it is made of plastic, so a dremmel, 15 minutes of making existing grooves wider and cutting a coule of additional grooves and voila, the red dot can really be installed on 1187.
The fact that the rail cannot be used to instal majory of red-dot sight is the reason why I rate it as 4 starts only.
a plastic peace of junk(12.11.2017)
It's plastic! what more need said. 8 inch group at 100 yards,with rem. 870 tac. and fully rifled barrel and sabot slugs. just touch it and it flexes. save your money and buy a mettle one.
N. prodotto: 955000142 WEAVER MOSSBERG 500 12 GAUGE SADDLE MOUNT Parti Fabbricante: 48341076683483416 Facile da installare Monte consente di allegare uno spettacolo ottico o laser al tuo fucile senza foratura, maschiatura o rendendo permanenti alterazioni alla pistola. Togliere i perni del gruppo di due trigger (REM), o il trigger e vite perno (Moss.), far scorrere sul Monte, allineare i fori e fissare con i perni di ricambio incluso. Design a basso profilo, forma-montaggio posizioni vista vicino all'asse del foro e si presenta come parte del ricevitore. Sette croce-slot in guida 5" consentono di installare un'ottica, anelli di cima-Monte Weaver o altro accessorio, con un sacco di flessibilità nell'impostazione pupillare. Leggero, ma robusto, armato modellato polimero stand fino a condizioni meteorologiche estreme che vanno da-40 ° F a 150 ° F.
59.9CHF0CHF 59.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: MossbergColore: BlackMateriale: PolymerModello: 500, 835Numero di basi: 1 pezzoTipo: Basi stile Weaver
Adatto per:
Mossberg
Colore:
Black
Materiale:
Polymer
Modello:
500,835
Numero di basi:
1 pezzo
Tipo:
Basi stile Weaver
Peso della spedizione: 0.136kgAltezza di spedizione: 46mmLarghezza di spedizione: 102mmLunghezza di spedizione: 132mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 955000141 WEAVER REMINGTON 870, 11-87, 1100 12GA & 20GA SADDEL MOUNT Parti Fabbricante: 48340076683483409 Facile da installare Monte consente di allegare uno spettacolo ottico o laser al tuo fucile senza foratura, maschiatura o rendendo permanenti alterazioni alla pistola. Togliere i perni del gruppo di due trigger (REM), o il trigger e vite perno (Moss.), far scorrere sul Monte, allineare i fori e fissare con i perni di ricambio incluso. Design a basso profilo, forma-montaggio posizioni vista vicino all'asse del foro e si presenta come parte del ricevitore. Sette croce-slot in guida 5" consentono di installare un'ottica, anelli di cima-Monte Weaver o altro accessorio, con un sacco di flessibilità nell'impostazione pupillare. Leggero, ma robusto, armato modellato polimero stand fino a condizioni meteorologiche estreme che vanno da-40 ° F a 150 ° F.
59.9CHF0CHF 59.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RemingtonColore: BlackMateriale: PolymerModello: 11-87, 1100, 870Numero di basi: 1 pezzoTipo: Basi stile Weaver
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling, tapping, or making permanent alterations to the gun. Remove the two trigger group pins (Rem.), or the ejector screw and trigger pin (Moss.), slide on the mount, line up the holes, and secure it with the included replacement pins. Low-profile, form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic, Weaver top-mount rings, or other accessory, with plenty of flexibility in setting eye relief. Lightweight, yet rugged, reinforced molded polymer stands up to extreme weather conditions ranging from -40°F to 150°F.
SPECS: Reinforced, injection-molded polymer composite, Black or Realtree Hardwoods HD Camo. Includes mount, button head ejector screw, trigger group bolt, knurled nut, threaded insert, nylon-tipped set screw, 3⁄32” and 1⁄8” hex head wrenches, and instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or left handed models. Mossberg fits 500, 835; 12 gauge only; right handed models only.
Altro...
Facile da installare, basso profilo vista Monte
Facile da installare Monte consente di allegare uno spettacolo ottico o laser al tuo fucile senza foratura, maschiatura o rendendo permanenti alterazioni alla pistola. Togliere i perni del gruppo di due trigger (REM), o il trigger e vite perno (Moss.), far scorrere sul Monte, allineare i fori e fissare con i perni di ricambio incluso. Design a basso profilo, forma-montaggio posizioni vista vicino all'asse del foro e si presenta come parte del ricevitore. Sette croce-slot in guida 5" consentono di installare un'ottica, anelli di cima-Monte Weaver o altro accessorio, con un sacco di flessibilità nell'impostazione pupillare. Leggero, ma robusto, armato modellato polimero stand fino a condizioni meteorologiche estreme che vanno da-40 ° F a 150 ° F.
Specifiche: composito polimerico rinforzato, stampato ad iniezione, nero o Realtree Hardwoods HD Camo. Comprende il Monte pulsante espulsore testa vite, bullone gruppo grilletto, dado zigrinato, inserto filettato, con punta in nylon vite, 3 ⁄ 32" e 1 ⁄ chiavi testa esagonale 8" e le istruzioni. Accoppiamenti di Remington 870, 1100, 11-87; 12 e 20 gauge; modelli di mani destra o sinistra. Accoppiamenti di Mossberg 500, 835; calibro 12 solo; solo modelli destri.
Altro...
Punteggi dei clienti per WEAVER MOSSBERG 500 12 GAUGE SADDLE MOUNT
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3.3
I would recommend this to anyone.(08.04.2011)
Simplicity is always a plus. There is a 3F standard by which to judge any product...Form, Fit, and Function. I would give high marks on all three for this item.
Well made but not a picatinni rail!(25.12.2014)
The mount is well made and is easy to install. The bad news (be aware!) is that, dispite the description, the rail doesn't match mil standard and so none of dozen red-dots I have (trijicon, eotech, aimpoint, vortex) can be installed on this rail. The good news is that it is made of plastic, so a dremmel, 15 minutes of making existing grooves wider and cutting a coule of additional grooves and voila, the red dot can really be installed on 1187.
The fact that the rail cannot be used to instal majory of red-dot sight is the reason why I rate it as 4 starts only.
a plastic peace of junk(12.11.2017)
It's plastic! what more need said. 8 inch group at 100 yards,with rem. 870 tac. and fully rifled barrel and sabot slugs. just touch it and it flexes. save your money and buy a mettle one.