Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

WEAVER
NO-GUNSMITH CONVERTA SHOTGUN MOUNTS

076683483416 955000142
Easy-To-Install, Low-Profile Sight Mount
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling, tapping, or making permanent alterations to the gun. Remove the two trigger group pins (Rem.), or the ejector screw and trigger pin (Moss.), slide on the mount, line up the holes, and secure it with the included replacement pins. Low-profile, form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic, Weaver top-mount rings, or other accessory, with plenty of flexibility in setting eye relief. Lightweight, yet rugged, reinforced molded polymer stands up to extreme weather conditions ranging from -40°F to 150°F.

SPECS: Reinforced, injection-molded polymer composite, Black or Realtree Hardwoods HD Camo. Includes mount, button head ejector screw, trigger group bolt, knurled nut, threaded insert, nylon-tipped set screw, 3⁄32” and 1⁄8” hex head wrenches, and instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or left handed models. Mossberg fits 500, 835; 12 gauge only; right handed models only.

59.9 59.9 2 CHF
N. prodotto: 955000142
WEAVER MOSSBERG 500 12 GAUGE SADDLE MOUNT
Parti Fabbricante: 48341 076683483416 Facile da installare Monte consente di allegare uno spettacolo ottico o laser al tuo fucile senza foratura, maschiatura o rendendo permanenti alterazioni alla pistola. Togliere i perni del gruppo di due trigger (REM), o il trigger e vite perno (Moss.), far scorrere sul Monte, allineare i fori e fissare con i perni di ricambio incluso. Design a basso profilo, forma-montaggio posizioni vista vicino all'asse del foro e si presenta come parte del ricevitore. Sette croce-slot in guida 5" consentono di installare un'ottica, anelli di cima-Monte Weaver o altro accessorio, con un sacco di flessibilità nell'impostazione pupillare. Leggero, ma robusto, armato modellato polimero stand fino a condizioni meteorologiche estreme che vanno da-40 ° F a 150 ° F.
59.9 CHF 0 CHF 59.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Mossberg Colore: Black Materiale: Polymer Modello: 500, 835 Numero di basi: 1 pezzo Tipo: Basi stile Weaver

Caratteristiche

Adatto per: Mossberg Colore: Black Materiale: Polymer Modello: 500,835 Numero di basi: 1 pezzo Tipo: Basi stile Weaver Peso della spedizione: 0.136kg Altezza di spedizione: 46mm Larghezza di spedizione: 102mm Lunghezza di spedizione: 132mm

Dettagli dell'elemento

Made in Usa



N. prodotto: 955000141
WEAVER REMINGTON 870, 11-87, 1100 12GA & 20GA SADDEL MOUNT
Parti Fabbricante: 48340 076683483409 Facile da installare Monte consente di allegare uno spettacolo ottico o laser al tuo fucile senza foratura, maschiatura o rendendo permanenti alterazioni alla pistola. Togliere i perni del gruppo di due trigger (REM), o il trigger e vite perno (Moss.), far scorrere sul Monte, allineare i fori e fissare con i perni di ricambio incluso. Design a basso profilo, forma-montaggio posizioni vista vicino all'asse del foro e si presenta come parte del ricevitore. Sette croce-slot in guida 5" consentono di installare un'ottica, anelli di cima-Monte Weaver o altro accessorio, con un sacco di flessibilità nell'impostazione pupillare. Leggero, ma robusto, armato modellato polimero stand fino a condizioni meteorologiche estreme che vanno da-40 ° F a 150 ° F.
59.9 CHF 0 CHF 59.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Remington Colore: Black Materiale: Polymer Modello: 11-87, 1100, 870 Numero di basi: 1 pezzo Tipo: Basi stile Weaver
Easy-To-Install, Low-Profile Sight Mount
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling, tapping, or making permanent alterations to the gun. Remove the two trigger group pins (Rem.), or the ejector screw and trigger pin (Moss.), slide on the mount, line up the holes, and secure it with the included replacement pins. Low-profile, form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic, Weaver top-mount rings, or other accessory, with plenty of flexibility in setting eye relief. Lightweight, yet rugged, reinforced molded polymer stands up to extreme weather conditions ranging from -40°F to 150°F.

SPECS: Reinforced, injection-molded polymer composite, Black or Realtree Hardwoods HD Camo. Includes mount, button head ejector screw, trigger group bolt, knurled nut, threaded insert, nylon-tipped set screw, 3⁄32” and 1⁄8” hex head wrenches, and instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or left handed models. Mossberg fits 500, 835; 12 gauge only; right handed models only.

Newsletter