F-Class shooting is growing rapidly, providing shooters another avenue to shoot long range. These rest foot pads thread onto your standard Sinclair Rest feet and prevent the rest feet from sinking into loose sand, gravel, or mud. The foot pads are machined from solid stainless steel and have a conical point on the down side to dig in a bit. Great for any kind of shooting where your rest is on a ground. They are 2.5 inches in diameter at the widest point. Sold as a set of three. NOTE: You will also need to purchase 749-013-900 (1/2-20 leg) to replace the speed screw. This is so all 3 F-Class rest feet can be used. The Sinclair Heavy Varmit Rests come with the standard rear leg so the purchase of the 749-013-900 is not required.
SPECS: Stainless Steel, ½-20 Threads
Altro...
F-classe di tiro sta crescendo rapidamente, fornendo tiratori un altro viale per sparare a lungo raggio. Questi rilievi del piede di resto del filetto sul tuo piedi Sinclair resto standard e impediscono che i piedi del resto affondando nella sabbia, ghiaia o fango. I rilievi del piede sono ricavati da acciaio inossidabile e hanno una punta conica sul lato negativo a scavare in un po '. Ottimo per qualsiasi tipo di ripresa dove il riposo è su un terreno. Sono 2,5 pollici di diametro nel punto più largo. Venduto come un insieme di tre. Nota: È necessario anche acquistare 749-013-900 (1/2-20 gamba) per sostituire la vite di velocità. Questo è così tutti e 3 i piedi di resto di F-Class possono essere utilizzati. La Sinclair pesante Varmit riposa venire con la gamba posteriore standard quindi l'acquisto di 749-013-900 non è necessaria.
Specifiche: ½-20 fili di acciaio inossidabile,
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL F-CLASS REST FEET 1/2"X20 THREADS 3 PACK
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 4
Be careful with hardened pins!(19.03.2012)
I have the hardened pins on my rest and managed to crack one foot all the way through on one side with a very minimal bump on a hardened surface. So don't set you rest down on a hard surface with these feet installed on hardened pins. I'm very gentle with my rest and was just setting it down on the garage floor. Picked it up to take it in the house and noticed the crack. OOPS! It happens.
N. prodotto: 749013830 SINCLAIR INTERNATIONAL F-CLASS REST FEET 1/2"X20 THREADS 3 PACK F-classe di tiro sta crescendo rapidamente, fornendo tiratori un altro viale per sparare a lungo raggio. Questi rilievi del piede di resto del filetto sul tuo piedi Sinclair resto standard e impediscono che i piedi del resto affondando nella sabbia, ghiaia o fango. I rilievi del piede sono ricavati da acciaio inossidabile e hanno una punta conica sul lato negativo a scavare in un po '. Ottimo per qualsiasi tipo di ripresa dove il riposo è su un terreno. Sono 2,5 pollici di diametro nel punto più largo. Venduto come un insieme di tre. Nota: È necessario anche acquistare 749-013-900 (1/2-20 gamba) per sostituire la vite di velocità. Questo è così tutti e 3 i piedi di resto di F-Class possono essere utilizzati. La Sinclair pesante Varmit riposa venire con la gamba posteriore standard quindi l'acquisto di 749-013-900 non è necessaria.
F-Class shooting is growing rapidly, providing shooters another avenue to shoot long range. These rest foot pads thread onto your standard Sinclair Rest feet and prevent the rest feet from sinking into loose sand, gravel, or mud. The foot pads are machined from solid stainless steel and have a conical point on the down side to dig in a bit. Great for any kind of shooting where your rest is on a ground. They are 2.5 inches in diameter at the widest point. Sold as a set of three. NOTE: You will also need to purchase 749-013-900 (1/2-20 leg) to replace the speed screw. This is so all 3 F-Class rest feet can be used. The Sinclair Heavy Varmit Rests come with the standard rear leg so the purchase of the 749-013-900 is not required.
SPECS: Stainless Steel, ½-20 Threads
Altro...
F-classe di tiro sta crescendo rapidamente, fornendo tiratori un altro viale per sparare a lungo raggio. Questi rilievi del piede di resto del filetto sul tuo piedi Sinclair resto standard e impediscono che i piedi del resto affondando nella sabbia, ghiaia o fango. I rilievi del piede sono ricavati da acciaio inossidabile e hanno una punta conica sul lato negativo a scavare in un po '. Ottimo per qualsiasi tipo di ripresa dove il riposo è su un terreno. Sono 2,5 pollici di diametro nel punto più largo. Venduto come un insieme di tre. Nota: È necessario anche acquistare 749-013-900 (1/2-20 gamba) per sostituire la vite di velocità. Questo è così tutti e 3 i piedi di resto di F-Class possono essere utilizzati. La Sinclair pesante Varmit riposa venire con la gamba posteriore standard quindi l'acquisto di 749-013-900 non è necessaria.
Specifiche: ½-20 fili di acciaio inossidabile,
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL F-CLASS REST FEET 1/2"X20 THREADS 3 PACK
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 4
Be careful with hardened pins!(19.03.2012)
I have the hardened pins on my rest and managed to crack one foot all the way through on one side with a very minimal bump on a hardened surface. So don't set you rest down on a hard surface with these feet installed on hardened pins. I'm very gentle with my rest and was just setting it down on the garage floor. Picked it up to take it in the house and noticed the crack. OOPS! It happens.