Lightweight & Reliable-Feeding, Ideal For Competition
Lightweight, molded polymer magazine has reinforced steel feed lips to ensure reliable delivery of all 10 rounds to the chamber of your 12 gauge Saiga shotgun. Ideal for the three-gun competition shooter, with deep, waffle texturing on the outside for a secure grasp during high-speed mag changes. Extra length ensures that even when fully loaded there s extra compressibility to the round stack so the magazine can be inserted with the bolt closed.
Léger & fiable-alimentation, idéal pour la compétition
Polymère moulé léger magazine a renforcé en acier bouche d'alimentation afin d'assurer une prestation fiable de tous les 10 tours à la chambre de votre fusil de chasse 12 calibre Saiga. Idéal pour le tireur de la concurrence de trois canons, profonde, gaufre de texturage sur l'extérieur pour une prise sécuritaire lors des changements de mag à grande vitesse. Longueur supplémentaire garantit que, même lorsqu'il s compressibilité supplémentaire à la pile ronde pour le magazine peut être inséré avec le boulon fermé.
FICHE
: en polymère renforcé moulé par injection, noir. capacité de 10 cartouches. S'adapte Saiga 12 fusils de calibre seulement.
Plus...
Évaluations client de PRO MAG SAIGA 12 GAUGE 10-ROUND MAGAZINE
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 2.3
Be prepared to hand fit these(11.09.2009)
I bought two of these and had to hand fit both. the plastic that engages the magazine fixed notch (not the release lever) is too long and won't allow the release lever to "click" into battery. Takes about 15 minutes of filing (didn't want to take off too much material). Once fitted they function fine. Tighter fit than SureFire but not as "snick-snick" to insert and release.
Shells jamming(11.11.2010)
The inside shell feeder, part that pushes the shells up, sticks inside while feeding and the shells jams on the inside end of the barrel (AK-12 shotgun). My investigation has found that the inside piece stops it's sliding, free flow no spring, at the top where it looks like part of the form molding was made. I'm going to file this inside area to see if it helps.
saiga 12 promag magazine(04.04.2011)
Almost all magazines require fitting up to your saiga 12. This is done on purpose, because the mfg. of your gun follows a very sloppy tolerance when it comes to dimensions during manufacturing. So to "custom fit " the magazine for every saiga 12 shotgun out there would be impossible for any manufacture of an aftermarket magazine to do for this gun. It feeds with no problems. My exprience so far with any feeding issues has been with the gun and ammo/ gas pressure and gas block settings. Look at these things also before concluding that it is a magazine problem.
Failure to feed(18.09.2012)
This is not a reliable mag. Failure to feed with the first 3 a las 2 rounds.
Needs improvement(18.09.2012)
I bought two of these and fitting them was not a prob but after about 100 rounds shot the spring in one just snapped in two places. I put it back together with ducktape and it works but not reliable anymore. other mag has done great though
Spring failure(01.01.2014)
I bought two of these as other magazines weren't available. The magazines had to be modified to fit the receiver (small common issue), but worked fine with numerous shells up to 3". This lasted for several range trips, until the follower failed to do it's job. After taking apart the mags, the internal spring had fallen apart in several pieces. I would suggest a better quality magazine than these.
Does not fit my Saiga 12(15.09.2014)
Second time I've tried a ProMag magazine. It does not fit the receiver of my Saiga 12.
Référence: 687000029 PRO MAG SAIGA 12 GAUGE 10-ROUND MAGAZINE Ref Fabricant: SAI02708279008719 Polymère moulé léger magazine a renforcé en acier bouche d'alimentation afin d'assurer une prestation fiable de tous les 10 tours à la chambre de votre fusil de chasse 12 calibre Saiga. Idéal pour le tireur de la concurrence de trois canons, profonde, gaufre de texturage sur l'extérieur pour une prise sécuritaire lors des changements de mag à grande vitesse. Longueur supplémentaire garantit que, même lorsqu'il s compressibilité supplémentaire à la pile ronde pour le magazine peut être inséré avec le boulon fermé.
59.9CHF12CHF 59.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A502
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Lightweight & Reliable-Feeding, Ideal For Competition
Lightweight, molded polymer magazine has reinforced steel feed lips to ensure reliable delivery of all 10 rounds to the chamber of your 12 gauge Saiga shotgun. Ideal for the three-gun competition shooter, with deep, waffle texturing on the outside for a secure grasp during high-speed mag changes. Extra length ensures that even when fully loaded there s extra compressibility to the round stack so the magazine can be inserted with the bolt closed.
Léger & fiable-alimentation, idéal pour la compétition
Polymère moulé léger magazine a renforcé en acier bouche d'alimentation afin d'assurer une prestation fiable de tous les 10 tours à la chambre de votre fusil de chasse 12 calibre Saiga. Idéal pour le tireur de la concurrence de trois canons, profonde, gaufre de texturage sur l'extérieur pour une prise sécuritaire lors des changements de mag à grande vitesse. Longueur supplémentaire garantit que, même lorsqu'il s compressibilité supplémentaire à la pile ronde pour le magazine peut être inséré avec le boulon fermé.
FICHE
: en polymère renforcé moulé par injection, noir. capacité de 10 cartouches. S'adapte Saiga 12 fusils de calibre seulement.
Plus...
Évaluations client de PRO MAG SAIGA 12 GAUGE 10-ROUND MAGAZINE
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 2.3
Be prepared to hand fit these(11.09.2009)
I bought two of these and had to hand fit both. the plastic that engages the magazine fixed notch (not the release lever) is too long and won't allow the release lever to "click" into battery. Takes about 15 minutes of filing (didn't want to take off too much material). Once fitted they function fine. Tighter fit than SureFire but not as "snick-snick" to insert and release.
Shells jamming(11.11.2010)
The inside shell feeder, part that pushes the shells up, sticks inside while feeding and the shells jams on the inside end of the barrel (AK-12 shotgun). My investigation has found that the inside piece stops it's sliding, free flow no spring, at the top where it looks like part of the form molding was made. I'm going to file this inside area to see if it helps.
saiga 12 promag magazine(04.04.2011)
Almost all magazines require fitting up to your saiga 12. This is done on purpose, because the mfg. of your gun follows a very sloppy tolerance when it comes to dimensions during manufacturing. So to "custom fit " the magazine for every saiga 12 shotgun out there would be impossible for any manufacture of an aftermarket magazine to do for this gun. It feeds with no problems. My exprience so far with any feeding issues has been with the gun and ammo/ gas pressure and gas block settings. Look at these things also before concluding that it is a magazine problem.
Failure to feed(18.09.2012)
This is not a reliable mag. Failure to feed with the first 3 a las 2 rounds.
Needs improvement(18.09.2012)
I bought two of these and fitting them was not a prob but after about 100 rounds shot the spring in one just snapped in two places. I put it back together with ducktape and it works but not reliable anymore. other mag has done great though
Spring failure(01.01.2014)
I bought two of these as other magazines weren't available. The magazines had to be modified to fit the receiver (small common issue), but worked fine with numerous shells up to 3". This lasted for several range trips, until the follower failed to do it's job. After taking apart the mags, the internal spring had fallen apart in several pieces. I would suggest a better quality magazine than these.
Does not fit my Saiga 12(15.09.2014)
Second time I've tried a ProMag magazine. It does not fit the receiver of my Saiga 12.