Protects Hand & Rail From Heat & Abrasion; Easy Slide-On Installation
Molded polymer cover slides over any Picatinny handguard rail to provide a comfortable, secure grasping surface. Protects the hand from sharp rail edges and barrel heat during long shooting sessions. Molded-in knurled bands enhance your grip, especially when hand is wet, and match the Troy Modular Combat Grip to give your rifle a neat, unified appearance. No struggling to stretch the cover over the rail: simply pop up the retaining clip, slide on rail, and close the positive-locking clip to keep the cover firmly in place. Sold in 3-paks.
SPECS: Polymer, Black. 6-1⁄8" (15. 6cm) long, 17⁄16" (2.6cm) wide. 1 oz. (28.3g) weight. Sold in 3-paks.
Plus...
Protège main & Rail de chaleur & à l'Abrasion ; Slide-sur une Installation facile
Moulé diapositives couverture polymère sur tout rail de garde-main Picatinny pour fournir une surface de préhension confortable, sûre. Protège la main des bords tranchants rail et Canon chaleur pendant de longues séances de tir. Moulé en moleté bandes améliorent votre poignée, surtout lorsque la main est mouillée et correspond à la poignée de Combat modulaire Troy pour donner à votre carabine une apparence soignée et unifiée. Aucun mal à étendre la couverture sur le rail : simplement pop-up le clip de maintien, chariot sur le rail et fermer le clip de verrouillage positif pour garder le couvercle fermement en place. Vendu en 3-paks.
Évaluations client de TROY INDUSTRIES BATTLE RAIL COVER 3-PK PICATINNY POLYMER BLACK 4.4"
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 2
Ok if you can get them right..(26.02.2016)
I bought this to put on the Daniel Defense Omega Rail setup that I recently installed on my Colt LE6920.
All of the videos I've watched made the installation look like a snap. It didn't go that way for me. The fit of the rail covers are *very* tight. It took a while to get them in just the right spot where the lock would push in fully. On one of them I never did get the lock to seat properly.
They do look and feel nice when they're on, but I eventually gave up and decided to take them off. That was even more difficult than pushing them on. Ended up having to us the plastic end of one of my gunsmithing hammers to tap the covers off.
I ended up going back to the snap on "ladder" style ones from Magpul.
If I try to put them on again in the future I may put a little oil on there where it meets the rails. Perhaps it would go on and off more easily.
Référence: 100041474 TROY INDUSTRIES BATTLE RAIL COVER 3-PK PICATINNY POLYMER BLACK 4.4" Ref Fabricant: SCOVBRC34BT0812699017241 Moulé diapositives couverture polymère sur tout rail de garde-main Picatinny pour fournir une surface de préhension confortable, sûre. Protège la main des bords tranchants rail et Canon chaleur pendant de longues séances de tir. Moulé en moleté bandes améliorent votre poignée, surtout lorsque la main est mouillée et correspond à la poignée de Combat modulaire Troy pour donner à votre carabine une apparence soignée et unifiée. Aucun mal à étendre la couverture sur le rail : simplement pop-up le clip de maintien, chariot sur le rail et fermer le clip de verrouillage positif pour garder le couvercle fermement en place. Vendu en 3-paks.
36.9CHF5CHF 36.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100011035 TROY INDUSTRIES BATTLE RAIL COVER 3-PK PICATINNY POLYMER BLACK 6" Ref Fabricant: SCOVBRC36BT00812699017326 Moulé diapositives couverture polymère sur tout rail de garde-main Picatinny pour fournir une surface de préhension confortable, sûre. Protège la main des bords tranchants rail et Canon chaleur pendant de longues séances de tir. Moulé en moleté bandes améliorent votre poignée, surtout lorsque la main est mouillée et correspond à la poignée de Combat modulaire Troy pour donner à votre carabine une apparence soignée et unifiée. Aucun mal à étendre la couverture sur le rail : simplement pop-up le clip de maintien, chariot sur le rail et fermer le clip de verrouillage positif pour garder le couvercle fermement en place. Vendu en 3-paks.
34.9CHF7CHF 34.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Protects Hand & Rail From Heat & Abrasion; Easy Slide-On Installation
Molded polymer cover slides over any Picatinny handguard rail to provide a comfortable, secure grasping surface. Protects the hand from sharp rail edges and barrel heat during long shooting sessions. Molded-in knurled bands enhance your grip, especially when hand is wet, and match the Troy Modular Combat Grip to give your rifle a neat, unified appearance. No struggling to stretch the cover over the rail: simply pop up the retaining clip, slide on rail, and close the positive-locking clip to keep the cover firmly in place. Sold in 3-paks.
SPECS: Polymer, Black. 6-1⁄8" (15. 6cm) long, 17⁄16" (2.6cm) wide. 1 oz. (28.3g) weight. Sold in 3-paks.
Plus...
Protège main & Rail de chaleur & à l'Abrasion ; Slide-sur une Installation facile
Moulé diapositives couverture polymère sur tout rail de garde-main Picatinny pour fournir une surface de préhension confortable, sûre. Protège la main des bords tranchants rail et Canon chaleur pendant de longues séances de tir. Moulé en moleté bandes améliorent votre poignée, surtout lorsque la main est mouillée et correspond à la poignée de Combat modulaire Troy pour donner à votre carabine une apparence soignée et unifiée. Aucun mal à étendre la couverture sur le rail : simplement pop-up le clip de maintien, chariot sur le rail et fermer le clip de verrouillage positif pour garder le couvercle fermement en place. Vendu en 3-paks.
Évaluations client de TROY INDUSTRIES BATTLE RAIL COVER 3-PK PICATINNY POLYMER BLACK 4.4"
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 2
Ok if you can get them right..(26.02.2016)
I bought this to put on the Daniel Defense Omega Rail setup that I recently installed on my Colt LE6920.
All of the videos I've watched made the installation look like a snap. It didn't go that way for me. The fit of the rail covers are *very* tight. It took a while to get them in just the right spot where the lock would push in fully. On one of them I never did get the lock to seat properly.
They do look and feel nice when they're on, but I eventually gave up and decided to take them off. That was even more difficult than pushing them on. Ended up having to us the plastic end of one of my gunsmithing hammers to tap the covers off.
I ended up going back to the snap on "ladder" style ones from Magpul.
If I try to put them on again in the future I may put a little oil on there where it meets the rails. Perhaps it would go on and off more easily.