Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
050806000148 430106222
The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
114.9 114.9 1 CHF
N. prodotto: 430106222
BROWNELLS BRN-4 BARREL NUT WRENCH
Parti Fabbricante: BRN-4-BNW 050806000148
114.9 CHF 27 CHF 114.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Brownells Modello: BRN-4

Caratteristiche

Adatto per: Brownells Modello: BRN-4 Peso della spedizione: 0.454kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 64mm

Dettagli dell'elemento

Made in Usa



The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
Newsletter