All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Altro...
Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
Specifiche: alluminio, nero, anodizzato. Viti in acciaio. Questo può richiedere il montaggio macinando la punta dei fili per adattare alcuni monumenti.
Altro...
Punteggi dei clienti per WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, LONG
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
N. prodotto: 962157520 WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, LONG Parti Fabbricante: 15752053506157525 Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
18.9CHF0CHF 18.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Peso della spedizione: 0.009kgAltezza di spedizione: 1mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 962157250 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, SHORT Parti Fabbricante: 11524053506115242 Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
18.9CHF14CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 962157530 WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, SHORT Parti Fabbricante: 15753053506157532 Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
18.9CHF1CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 962000079 WILLIAMS GUN SIGHT TARGET ELEVATION GIB LOCK KNOB Parti Fabbricante: 61613005350616130 Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
18.9CHF10CHF 18.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 962157240 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, LONG Parti Fabbricante: 11525053506115259 Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
18.9CHF0CHF 18.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Altro...
Tutte le attrazioni infallibile (eccetto modelli TK) utilizzano la botticella di elevazione. La manopola di elevazione lungo è per l'uso con punti panoramici di destinazione Foolproof-TK. La manopola di blocco Gib elevazione si inserisce sia modelli standard di Foolproof e Foolproof-TK
Specifiche: alluminio, nero, anodizzato. Viti in acciaio. Questo può richiedere il montaggio macinando la punta dei fili per adattare alcuni monumenti.
Altro...
Punteggi dei clienti per WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, LONG
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.