Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps securely with a single machine screw. Rounded edges and recessed attachment screws resist snagging on other gear. Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps securely with a single machine screw. Rounded edges and recessed attachment screws resist snagging on other gear. This is not a gas block height sight. When mounting on a railed gas block, the gas block has to be same plane or this sight will not regulate with rear sight.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Front Sight - 1" (2.5cm) long, 1-1⁄8" (2.8cm) wide, 1¾" (4.5cm) high from top of receiver rail to top of sight housing. 1.1 oz. (30g) weight. For proper regulation with A1.5 or USGI A2-type rear sight, must be mounted on a handguard rail or railed gas block that is the same height as the receiver rail.
Altro...
Robusto, affidabile e sempre distribuito sollievo avvistamento
Leggero, snelle backup attrazioni sono costruiti sul principio K.I.S.S. affinché che l'operatore tattico ha un affidabile, sempre schierato avvistamento opzione se l'ottica principale non riesce. Un pezzo di design scivola facilmente su una guida di MIL-STD 1913 e fascette saldamente con una sola vite di macchina. I bordi arrotondati e le viti di fissaggio da incasso resistono sbavatura su altri attrezzi. Leggero, snelle backup attrazioni sono costruiti sul principio K.I.S.S. affinché che l'operatore tattico ha un affidabile, sempre schierato avvistamento opzione se l'ottica principale non riesce. Un pezzo di design scivola facilmente su una guida di MIL-STD 1913 e fascette saldamente con una sola vite di macchina. I bordi arrotondati e le viti di fissaggio da incasso resistono sbavatura su altri attrezzi.
Specifiche: 6061 T6 alluminio, hardcoat tipo III anodizzato nero opaco. Vista anteriore - 1"(2,5 cm) lungo, 1-1 ⁄ 8 cm (2.8) ampia, 1¾" (4,5 cm) alto dalla parte superiore della rotaia ricevitore alla parte superiore dell'alloggiamento di vista. peso 1,1 once (30g). Per una regolamentazione adeguata con 1.5 o USGI A2-tipo tacca di mira, deve essere montato su un rail handguard o blocco inveì gas che è la stessa altezza la rotaia del ricevitore.
Altro...
Punteggi dei clienti per DANIEL DEFENSE FIXED BACKUP FRONT SIGHT FOR AR-15 BLACK
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4.5
very good sight(04.12.2010)
Excellent "Iron" sight! perfect fit!
Gets the job done(15.11.2011)
I use this as primary sight with DD rear sight for 9mm carbine. Very rugged and light, once tightened this thing stays put. If no need for flip up front sight or gas block mounting this is the way to go.
Only con is the tightening screw which is quite soft material: make sure to use big enough driver! Torx screw would be much better.
N. prodotto: 100004759 DANIEL DEFENSE FIXED BACKUP FRONT SIGHT FOR AR-15 BLACK Parti Fabbricante: 19-017-04013852548002172 Leggero, snelle backup attrazioni sono costruiti sul principio K.I.S.S. affinché che l'operatore tattico ha un affidabile, sempre schierato avvistamento opzione se l'ottica principale non riesce. Un pezzo di design scivola facilmente su una guida di MIL-STD 1913 e fascette saldamente con una sola vite di macchina. I bordi arrotondati e le viti di fissaggio da incasso resistono sbavatura su altri attrezzi. Leggero, snelle backup attrazioni sono costruiti sul principio K.I.S.S. affinché che l'operatore tattico ha un affidabile, sempre schierato avvistamento opzione se l'ottica principale non riesce. Un pezzo di design scivola facilmente su una guida di MIL-STD 1913 e fascette saldamente con una sola vite di macchina. I bordi arrotondati e le viti di fissaggio da incasso resistono sbavatura su altri attrezzi.
114.9CHF22CHF 114.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
AR-15
Altezza:
1.7
Colore:
Black
Materiale:
Alluminio
Tipo:
Fisso
Peso della spedizione: 0.091kgAltezza di spedizione: 61mmLarghezza di spedizione: 79mmLunghezza di spedizione: 140mm
Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps securely with a single machine screw. Rounded edges and recessed attachment screws resist snagging on other gear. Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps securely with a single machine screw. Rounded edges and recessed attachment screws resist snagging on other gear. This is not a gas block height sight. When mounting on a railed gas block, the gas block has to be same plane or this sight will not regulate with rear sight.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Front Sight - 1" (2.5cm) long, 1-1⁄8" (2.8cm) wide, 1¾" (4.5cm) high from top of receiver rail to top of sight housing. 1.1 oz. (30g) weight. For proper regulation with A1.5 or USGI A2-type rear sight, must be mounted on a handguard rail or railed gas block that is the same height as the receiver rail.
Altro...
Robusto, affidabile e sempre distribuito sollievo avvistamento
Leggero, snelle backup attrazioni sono costruiti sul principio K.I.S.S. affinché che l'operatore tattico ha un affidabile, sempre schierato avvistamento opzione se l'ottica principale non riesce. Un pezzo di design scivola facilmente su una guida di MIL-STD 1913 e fascette saldamente con una sola vite di macchina. I bordi arrotondati e le viti di fissaggio da incasso resistono sbavatura su altri attrezzi. Leggero, snelle backup attrazioni sono costruiti sul principio K.I.S.S. affinché che l'operatore tattico ha un affidabile, sempre schierato avvistamento opzione se l'ottica principale non riesce. Un pezzo di design scivola facilmente su una guida di MIL-STD 1913 e fascette saldamente con una sola vite di macchina. I bordi arrotondati e le viti di fissaggio da incasso resistono sbavatura su altri attrezzi.
Specifiche: 6061 T6 alluminio, hardcoat tipo III anodizzato nero opaco. Vista anteriore - 1"(2,5 cm) lungo, 1-1 ⁄ 8 cm (2.8) ampia, 1¾" (4,5 cm) alto dalla parte superiore della rotaia ricevitore alla parte superiore dell'alloggiamento di vista. peso 1,1 once (30g). Per una regolamentazione adeguata con 1.5 o USGI A2-tipo tacca di mira, deve essere montato su un rail handguard o blocco inveì gas che è la stessa altezza la rotaia del ricevitore.
Altro...
Punteggi dei clienti per DANIEL DEFENSE FIXED BACKUP FRONT SIGHT FOR AR-15 BLACK
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4.5
very good sight(04.12.2010)
Excellent "Iron" sight! perfect fit!
Gets the job done(15.11.2011)
I use this as primary sight with DD rear sight for 9mm carbine. Very rugged and light, once tightened this thing stays put. If no need for flip up front sight or gas block mounting this is the way to go.
Only con is the tightening screw which is quite soft material: make sure to use big enough driver! Torx screw would be much better.