Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. Check primer pocket depth and diameter. Use the "Go" end of the gauge to check primer pocket depth, if any crimp is properly removed, and if the primer pocket is loose. If it feels loose on the "Go" end of the gauge, use the other end of the tool, the "No Go" end, to test if the primer pocket is too loose to hold a primer. If the No-Go gauge slides into the pocket, then you know to junk that brass.
Altro...
Interrompere indovinando sulle vostre tasche di primer. So per certo con il terminale a pressare Gage Primer Pocket Gauge. Disponibile per gli iniettori di piccolo o grande. Controllare il diametro e la profondità di tasca primer. Utilizzare alla fine di "Go" del manometro per controllare la profondità di tasca primer, se qualsiasi crimpare correttamente viene rimosso e la tasca di iniettore è sciolto. Se ci si sente sciolto alla fine di "Go" del manometro, utilizzare l'altra estremità dello strumento, alla fine "No Go", per provare se il pocket primer è troppo allentato per tenere un primer. Se il no-go di gauge diapositive nella tasca, allora sai di spazzatura che in ottone.
Altro...
Punteggi dei clienti per BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.2
Priver Pocket "Go No-Go" Gauge(21.10.2014)
This "Go No-Go" gauge is a handy and accurate tool to check primer pocket diameters. Cannot get any easier.
Not a Tool - A Miniture Gadget(04.11.2016)
This gauge must have been designed and made for a hand of a 10-year old.
The body is 0.48 inch in diameter and only 0.75 inch long. It disappears in my hand. This tool must have been designed by someone who is not a person who reloads ammunition. An acceptable size would be a body at least â inch in diameter and a lengths of approximately 1-¼ inch. A tool in this size I would love and would be able to use.
Reloading equipment is mainly used by the men population and not by a small child. I had it tested by my wife since her hands are smaller than my, ans she also had difficulties using this tool because of its size. If you redesign this tool to the recommended measurements it would be a wonderful tool, The size it is now, I consider it totally useless. Definitely NOT to be recommended.
Checks for large and too small pockets(05.09.2017)
Easy to use inexpensive must have tool. It's not as small as the other reviewer started
Handy Tool(06.03.2018)
I have no idea what the last persons review could possibly be based on. This is a well built handy little tool that works perfectly for its intended use. I can sort crimped or oversized primer pockets as fast as one physically can. No problem fitting in my large hands, maybe the last person was all thumbs! Lol
Great tool(05.10.2018)
Great tool, got one for large and small primer pockets. Quick to check Which cases need to be swaged and any worn primer pockets. I thought it was small when I first saw it , but after using it....no problems....would recommend.
N. prodotto: 100015614 BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE Parti Fabbricante: SG-LP-002857042005018 Interrompere indovinando sulle vostre tasche di primer. So per certo con il terminale a pressare Gage Primer Pocket Gauge. Disponibile per gli iniettori di piccolo o grande. Controllare il diametro e la profondità di tasca primer. Utilizzare alla fine di "Go" del manometro per controllare la profondità di tasca primer, se qualsiasi crimpare correttamente viene rimosso e la tasca di iniettore è sciolto. Se ci si sente sciolto alla fine di "Go" del manometro, utilizzare l'altra estremità dello strumento, alla fine "No Go", per provare se il pocket primer è troppo allentato per tenere un primer. Se il no-go di gauge diapositive nella tasca, allora sai di spazzatura che in ottone.
21.9CHF97CHF 21.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Peso della spedizione: 0.027kgAltezza di spedizione: 13mmLarghezza di spedizione: 51mmLunghezza di spedizione: 152mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100015613 BROWNELLS SMALL PRIMER POCKET SWAGE GAUGE Parti Fabbricante: SG-SP-001857042005032 Interrompere indovinando sulle vostre tasche di primer. So per certo con il terminale a pressare Gage Primer Pocket Gauge. Disponibile per gli iniettori di piccolo o grande. Controllare il diametro e la profondità di tasca primer. Utilizzare alla fine di "Go" del manometro per controllare la profondità di tasca primer, se qualsiasi crimpare correttamente viene rimosso e la tasca di iniettore è sciolto. Se ci si sente sciolto alla fine di "Go" del manometro, utilizzare l'altra estremità dello strumento, alla fine "No Go", per provare se il pocket primer è troppo allentato per tenere un primer. Se il no-go di gauge diapositive nella tasca, allora sai di spazzatura che in ottone.
21.9CHF54CHF 21.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Stop guessing about your primer pockets. Know for sure with the Swage Gage Primer Pocket Gauge. Available for Small or Large primers. Check primer pocket depth and diameter. Use the "Go" end of the gauge to check primer pocket depth, if any crimp is properly removed, and if the primer pocket is loose. If it feels loose on the "Go" end of the gauge, use the other end of the tool, the "No Go" end, to test if the primer pocket is too loose to hold a primer. If the No-Go gauge slides into the pocket, then you know to junk that brass.
Altro...
Interrompere indovinando sulle vostre tasche di primer. So per certo con il terminale a pressare Gage Primer Pocket Gauge. Disponibile per gli iniettori di piccolo o grande. Controllare il diametro e la profondità di tasca primer. Utilizzare alla fine di "Go" del manometro per controllare la profondità di tasca primer, se qualsiasi crimpare correttamente viene rimosso e la tasca di iniettore è sciolto. Se ci si sente sciolto alla fine di "Go" del manometro, utilizzare l'altra estremità dello strumento, alla fine "No Go", per provare se il pocket primer è troppo allentato per tenere un primer. Se il no-go di gauge diapositive nella tasca, allora sai di spazzatura che in ottone.
Altro...
Punteggi dei clienti per BROWNELLS LARGE PRIMER POCKET SWAGE GAUGE
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.2
Priver Pocket "Go No-Go" Gauge(21.10.2014)
This "Go No-Go" gauge is a handy and accurate tool to check primer pocket diameters. Cannot get any easier.
Not a Tool - A Miniture Gadget(04.11.2016)
This gauge must have been designed and made for a hand of a 10-year old.
The body is 0.48 inch in diameter and only 0.75 inch long. It disappears in my hand. This tool must have been designed by someone who is not a person who reloads ammunition. An acceptable size would be a body at least â inch in diameter and a lengths of approximately 1-¼ inch. A tool in this size I would love and would be able to use.
Reloading equipment is mainly used by the men population and not by a small child. I had it tested by my wife since her hands are smaller than my, ans she also had difficulties using this tool because of its size. If you redesign this tool to the recommended measurements it would be a wonderful tool, The size it is now, I consider it totally useless. Definitely NOT to be recommended.
Checks for large and too small pockets(05.09.2017)
Easy to use inexpensive must have tool. It's not as small as the other reviewer started
Handy Tool(06.03.2018)
I have no idea what the last persons review could possibly be based on. This is a well built handy little tool that works perfectly for its intended use. I can sort crimped or oversized primer pockets as fast as one physically can. No problem fitting in my large hands, maybe the last person was all thumbs! Lol
Great tool(05.10.2018)
Great tool, got one for large and small primer pockets. Quick to check Which cases need to be swaged and any worn primer pockets. I thought it was small when I first saw it , but after using it....no problems....would recommend.