Easy-to-use design lets you secure the plunger tube to the frame without fear of tube crush or expensive frame damage. Adjustable to fit all makes of frames and tubes for both installing and re-tightening. Hardened crimping point assures long tool life. Plunger Tube Support slilps inside plunger tube and prevents compression damage while tube is being staked to frame. Steel construction provides a rigid structure and many years of use.
Altro...
Facile da usare design consente di fissare il tubo del pistone al telaio senza timore di schiacciamento del tubo o telaio costosi danni. Regolabile per adattarsi a tutte le marche di telai e tubi per l'installazione e ri-serraggio. Punto di crimpatura indurito assicura lunga durata. Stantuffo tubo supporto slilps all'interno del pistone del tubo e previene i danni di compressione mentre si è puntato la provetta al telaio. Costruzione in acciaio fornisce una struttura rigida e molti anni di utilizzo.
Altro...
Punteggi dei clienti per BROWNELLS 8-32 TPI CRIMPER REPLACEMENT TIP
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4
Solid Quality(03.09.2015)
This is a solid, quality tool that is easy to use. It took more time unpacking it than it took to stake the plunger tube. To avoid fumbling I put the frame in a soft jaw vise. Arrange a portable light to illuminate the inside of the frame to aid in getting the anvil on the pin(s) first try. I also put a piece of tape over the plunger tube as a precaution to protect the fresh Cerakote finish.
As a bonus this tool works great as a carrier dog pin staking tool on Remington 870/1100/1187 shotguns.
1911 Plunger Tube Staking Tool (27.10.2015)
I purchased this tool to re-stake the loose plunger tube on a 1911 Colt. This is a very well made and heavy duty tool that should last many years. Use was very straightforward and simple. Not counting the pistol disassembly time I would say it took about 3 minutes to mount and re-stake the two plunger tube pins. Nothing not to like about this tool.
needs work(08.12.2015)
needs work, the hardness of the staking tip is week. I crushed two so far.
Tip Not Hardened(30.07.2015)
It looks like the tool should work well. It did not work for me because the tip supplied to crimp was not hardened and simply deformed without crimping. The tip was so soft the threads and hex socket head failed when I attempted to remove it from the base after first use.
It should be possible to reshape and case harden a standard 10-32 x 5/16 set screw ($0.25) with more threads that may be more durable if the replacement tip doesn't work at $4.00 (wish I had been offered a free replacement when I called to discuss). The photo shows how the tip deformed to hole dimensions instead of crimping.
Works as advertised. As I was crimping the plunger tube, I did indeed feel the Staking Support become temporarily seized inside the plunger tube. However, when the pressure from the crimper was relieved, the Staking Support slid out of the plunger tube easily. A little expensive, but it does prevent damage to the plunger tube, which also saves time and frustration.
N. prodotto: 080806101 BROWNELLS 8-32 TPI CRIMPER REPLACEMENT TIP Facile da usare design consente di fissare il tubo del pistone al telaio senza timore di schiacciamento del tubo o telaio costosi danni. Regolabile per adattarsi a tutte le marche di telai e tubi per l'installazione e ri-serraggio. Punto di crimpatura indurito assicura lunga durata. Stantuffo tubo supporto slilps all'interno del pistone del tubo e previene i danni di compressione mentre si è puntato la provetta al telaio. Costruzione in acciaio fornisce una struttura rigida e molti anni di utilizzo.
14.9CHF1CHF 14.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
1911
Peso della spedizione: 0.005kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080806100 BROWNELLS 10-32 TPI CRIMPER REPLACEMENT TIP Facile da usare design consente di fissare il tubo del pistone al telaio senza timore di schiacciamento del tubo o telaio costosi danni. Regolabile per adattarsi a tutte le marche di telai e tubi per l'installazione e ri-serraggio. Punto di crimpatura indurito assicura lunga durata. Stantuffo tubo supporto slilps all'interno del pistone del tubo e previene i danni di compressione mentre si è puntato la provetta al telaio. Costruzione in acciaio fornisce una struttura rigida e molti anni di utilizzo.
13.9CHF12CHF 13.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 080001091 BROWNELLS 1911 PLUNGER TUBE STAKING TOOL Facile da usare design consente di fissare il tubo del pistone al telaio senza timore di schiacciamento del tubo o telaio costosi danni. Regolabile per adattarsi a tutte le marche di telai e tubi per l'installazione e ri-serraggio. Punto di crimpatura indurito assicura lunga durata. Stantuffo tubo supporto slilps all'interno del pistone del tubo e previene i danni di compressione mentre si è puntato la provetta al telaio. Costruzione in acciaio fornisce una struttura rigida e molti anni di utilizzo.
79.9CHF31CHF 79.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 080707000 BROWNELLS 1911 PLUNGER TUBE SUPPORT050806104051 Facile da usare design consente di fissare il tubo del pistone al telaio senza timore di schiacciamento del tubo o telaio costosi danni. Regolabile per adattarsi a tutte le marche di telai e tubi per l'installazione e ri-serraggio. Punto di crimpatura indurito assicura lunga durata. Stantuffo tubo supporto slilps all'interno del pistone del tubo e previene i danni di compressione mentre si è puntato la provetta al telaio. Costruzione in acciaio fornisce una struttura rigida e molti anni di utilizzo.
24.9CHF0CHF 24.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Easy-to-use design lets you secure the plunger tube to the frame without fear of tube crush or expensive frame damage. Adjustable to fit all makes of frames and tubes for both installing and re-tightening. Hardened crimping point assures long tool life. Plunger Tube Support slilps inside plunger tube and prevents compression damage while tube is being staked to frame. Steel construction provides a rigid structure and many years of use.
Altro...
Facile da usare design consente di fissare il tubo del pistone al telaio senza timore di schiacciamento del tubo o telaio costosi danni. Regolabile per adattarsi a tutte le marche di telai e tubi per l'installazione e ri-serraggio. Punto di crimpatura indurito assicura lunga durata. Stantuffo tubo supporto slilps all'interno del pistone del tubo e previene i danni di compressione mentre si è puntato la provetta al telaio. Costruzione in acciaio fornisce una struttura rigida e molti anni di utilizzo.
Altro...
Punteggi dei clienti per BROWNELLS 8-32 TPI CRIMPER REPLACEMENT TIP
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4
Solid Quality(03.09.2015)
This is a solid, quality tool that is easy to use. It took more time unpacking it than it took to stake the plunger tube. To avoid fumbling I put the frame in a soft jaw vise. Arrange a portable light to illuminate the inside of the frame to aid in getting the anvil on the pin(s) first try. I also put a piece of tape over the plunger tube as a precaution to protect the fresh Cerakote finish.
As a bonus this tool works great as a carrier dog pin staking tool on Remington 870/1100/1187 shotguns.
1911 Plunger Tube Staking Tool (27.10.2015)
I purchased this tool to re-stake the loose plunger tube on a 1911 Colt. This is a very well made and heavy duty tool that should last many years. Use was very straightforward and simple. Not counting the pistol disassembly time I would say it took about 3 minutes to mount and re-stake the two plunger tube pins. Nothing not to like about this tool.
needs work(08.12.2015)
needs work, the hardness of the staking tip is week. I crushed two so far.
Tip Not Hardened(30.07.2015)
It looks like the tool should work well. It did not work for me because the tip supplied to crimp was not hardened and simply deformed without crimping. The tip was so soft the threads and hex socket head failed when I attempted to remove it from the base after first use.
It should be possible to reshape and case harden a standard 10-32 x 5/16 set screw ($0.25) with more threads that may be more durable if the replacement tip doesn't work at $4.00 (wish I had been offered a free replacement when I called to discuss). The photo shows how the tip deformed to hole dimensions instead of crimping.
Works as advertised. As I was crimping the plunger tube, I did indeed feel the Staking Support become temporarily seized inside the plunger tube. However, when the pressure from the crimper was relieved, the Staking Support slid out of the plunger tube easily. A little expensive, but it does prevent damage to the plunger tube, which also saves time and frustration.