Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

BRAVO COMPANY
AR-15 BCMGUNFIGHTER™ PNT TRIGGER

812526020451 100018632

The BCM® PNT™ Trigger and Hammer are built to surpass Mil-Spec standards without compromising the reliability of the USGI TDP(Technical Data Package). Each PNT Trigger and Hammer is heat treated in a three step process and hardened for optimal grain structure alignment, surpassing commercial "equivalents" in both durability and performance. To create a perfect alignment and smooth trigger pull, the BCM PNT Trigger and Hammer bores are honed to perfection and the impact resistant trigger and hammer pins are centerless ground to a fine finish with superior tolerances. The BCM Disconnector is stamped from 1070 material and fine blanked for cleaner edges and double disc ground to precise size to ensure consistent and reliable operation. Hand polished sear engagement surfaces reduce friction an additional 300% beyond the Mil-Spec. An electroless nickel finish reduces felt creep and cleans up the grittiness commonly associated with the press in a Mil-Spec trigger. Teflon particles embedded in the nickel, further reduce friction in the interface and double down on a finish that is corrosion, rust and oxidation resistant.

Will not work with Colt Large Pin Hammer & Trigger Hole Lower.

Altro...

Il BCM® PNT™ Trigger e martello sono costruiti per superare gli standard Mil-Spec senza compromettere l'affidabilità della TDP(Technical Data Package) USGI. Ogni Trigger PNT e martello è trattato termicamente in un processo in tre fasi e indurito per l'allineamento della struttura grano ottimale, superando commerciali "equivalenti" in prestazioni e durata. Per creare un perfetto allineamento e liscia del grilletto, all'interno dei fori BCM PNT Trigger e martello è affinato alla perfezione e i perni di trigger e martello resistente agli urti sono rettificati per una raffinata finitura con tolleranze superiori. Il sezionatore di BCM è timbrato da 1070 materiale e bene oscurato per puliti bordi e doppio disco ground di dimensioni precise per assicurare un funzionamento coerenza e affidabile. Mano lucidata dente superfici riducono l'attrito un ulteriore 300% oltre il Mil-Spec. Una finitura nichel electroless riduce feltro creep e pulisce la granulosità comunemente associati con la stampa in un trigger di Mil-Spec. Particelle di Teflon incorporate in nickel, ridurre ulteriormente l'attrito nell'interfaccia e doppio giù su un rivestimento che è corrosione, ruggine e resistente all'ossidazione.

Non funzionerà con Colt grande Pin martello & Trigger foro inferiore.

Altro...

Punteggi dei clienti per BRAVO COMPANY PNT TRIGGER

Numero di punteggi: 15
Da brownells.com: 15
Punteggio medio: 4.8

Good value for the money (19.01.2016)

Noticeably smoother pull and crisper break than standard MIL Spec trigger for only a few more dollars. This is a great way to upgrade for a low cost or to put in your build.

Excellent product! (20.01.2016)

Great option from budget to dream gun. Slick nickel surface for easy cleaning and corrosion protection. Clean break with zero creep. Great trigger at a great price!

Serviceable trigger for duty use (04.02.2016)

Real nice trigger for the money. Way better than milspec with a clean 6lb brake and very positive reset. BCM trigger replaced the nasty stock trigger in my Sig 516 patrol rifle.

Best dollar value AR trigger (07.04.2016)

For non-competitors, this is the perfect trigger upgrade. After only 40 or 50 hammer block dry fires, the pull is smooth as glass, then breaks crisply. With just a touch of Brownell's Action Magic on all contact surfaces, pull is consistent 5 lb. Geissele's BG2S-E has been my 'best value upgrade' 'til now, but this PNT gives me at least 80% of the BG2S-E's improvement (over a stock GI trigger) for a third the cost.

better than any i have tried (06.05.2016)

just couldn't pay the money for a decent 2 stage so I took a shot in the dark and ordered this bravo trigger group instead. 5 minutes to install and the shot breaks like glass. no pull gauge but estimate well below 5#.

could be due to the super fine finish on the mating surface. will be ordering the same unit for my next build.

Worth the money. (11.09.2016)

Really good trigger for the money. Trigger pull gauge shows around 5 1/2 pounds, with no creep or grittiness.

Impressive (07.10.2016)

My comments here are basically on installation. It was a breeze. I pulled the trigger pin out of the trigger and disconnector and by hand inserted the trigger, disconnector, and pushed the pin through the lower receiver. No tools, hammer, etc. On the hammer I did insert a punch pin from the right side to hold the hammer in place. I then used hand pressure and jiggling to push the hammer pin through the hammer and the lower receiver. Only about 1/8" of the pin stuck out and I used a plastic marker pen and brass hammer to set it flush. No scratch marks on the LR. Using a dummy round I tested the trigger pull and it feels smooth. I was impressed with the quality. All springs are pre-assembled and in place. The trigger and hammer pins are inserted as in the picture.

Excellent AR Trigger (09.11.2016)

I used this trigger in my AR-15 300 Blackout build. Fantastic trigger, great function and solid. While a drop-in trigger would have been nice, this one is smooth, clean, and breaks well. If you are building a mil-spec rifle this is a great trigger.

You will be very pleased and then some. (29.11.2016)

I've bought several of these for my builds and you can't go wrong. A fantastic trigger for the price and don't shy away because of that. No cons to this trigger at all.

My wife prefers this to the G2S! (16.05.2017)

Trigger is impressive, think of it as a step up from a ALG Defense ACT halfway between that and the Geissele 2 stage. The BCM PNT is very clean, very crisp, and has a 5-6 lb pull. I was blown away at how good it is for the cost, minimal first stage that is barely noticeable, then a nice break. Crisp hard reset. Would definitely buy again.

Great Combat Trigger (27.05.2017)

I don't want to carry a carbine with too light a trigger. Just in case the shooting goes to court.

What I want is a trigger that is breaks clean and has no creep or grittiness.

And this BCM offers all that.

Was easy to install.

Love this trigger (04.07.2017)

Love this trigger. Everything about it is SMOOTH. Every build from now on will have this.

Good for the money, otherwise just ok (30.08.2017)

I own four BCMs that came with this trigger, partially thanks to Brownells and there 10% off sales that compelled me to buy some of them. I swapped every trigger for Geissele SSAs. It's not that this isn't a fine OEM trigger, but it's still too heavy and creepy for my tastes. Caveat: I'm not a tactical guy. I shoot for the love of guns and joy of shooting...but my home defense BCM ELW has a Geissele 2-stage. Again, it's a fine trigger, and easy to sell to help defray the cost of the Geissele, and if you like a quality, heavy trigger that's a cut above MILSPEC, this is a good one.

A good trigger (16.06.2018)

If you want the Executive Summary, this is a 5 Star GI Trigger that is a 3 Star Value at its price.

I bought a Colt 6920 and it had such a terrible trigger, it was hard to shoot decent groups. I donât have the spare cash right now for a Geissele SSA and really a M4 type rifle doesnât need one anyway. This trigger had the best reviews of the Enhanced GI triggers and the cost were all similar among the various ALG and the BCM so I felt most comfortable with this option.

I donât have a trigger pull gauge, but this is a good single stage GI trigger that transformed my rifle and it is now easy to shoot acceptable groups at the range. My only problem with all these triggers is that they should probably all sell for about $30. The last two lowers I built using DPMS and an old Stag LPK both have very acceptable triggers. The BCM is a little better, but it cost more than either LPK for just the trigger.

Iâve heard good things about PSAâs $30 EPT Trigger and will pick one up the next time I see one on sale to compare the two.

Best for the money (22.09.2018)

Trigger is built well and machine work is high quality. Zero issues with fit or finish. Trigger pull is heavier than I like and this isn't a >$100 trigger so I was prepared for that. Trigger reset is basically the full length trigger pull, no advantages here. Pull is steady & smooth - no grit - crisp break. Better by far when compared to unpolished, coated, mil-spec. Great mid-tier trigger that works as it should and will last.

Leggi più recensioni su brownells.com

104.9 104.9 1 CHF

N. prodotto: 100018632
BRAVO COMPANY PNT TRIGGER
Parti Fabbricante: BCMPNTTA1 812526020451 Il BCM® PNT™ Trigger e martello sono costruiti per superare gli standard Mil-Spec senza compromettere l'affidabilità della TDP(Technical Data Package) USGI. Ogni Trigger PNT e martello è trattato termicamente in un processo in tre fasi e indurito per l'allineamento della struttura grano ottimale, superando commerciali "equivalenti" in prestazioni e durata. Per creare un perfetto allineamento e liscia del grilletto, all'interno dei fori BCM PNT Trigger e martello è affinato alla perfezione e i perni di trigger e martello resistente agli urti sono rettificati per una raffinata finitura con tolleranze superiori. Il sezionatore di BCM è timbrato da 1070 materiale e bene oscurato per puliti bordi e doppio disco ground di dimensioni precise per assicurare un funzionamento coerenza e affidabile. Mano lucidata dente superfici riducono l'attrito un ulteriore 300% oltre il Mil-Spec. Una finitura nichel electroless riduce feltro creep e pulisce la granulosità comunemente associati con la stampa in un trigger di Mil-Spec. Particelle di Teflon incorporate in nickel, ridurre ulteriormente l'attrito nell'interfaccia e doppio giù su un rivestimento che è corrosione, ruggine e resistente all'ossidazione.

104.9 CHF 59 CHF 104.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15 Tipo: Single-Stage

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Tipo: Single-Stage Peso della spedizione: 0.045kg Altezza di spedizione: 38mm Larghezza di spedizione: 108mm Lunghezza di spedizione: 178mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c

Will not work with Colt Large Pin Hammer & Trigger Hole Lower.

Altro...

Non funzionerà con Colt grande Pin martello & Trigger foro inferiore.

Altro...

Punteggi dei clienti per BRAVO COMPANY PNT TRIGGER

Numero di punteggi: 15
Da brownells.com: 15
Punteggio medio: 4.8

Good value for the money (19.01.2016)

Noticeably smoother pull and crisper break than standard MIL Spec trigger for only a few more dollars. This is a great way to upgrade for a low cost or to put in your build.

Excellent product! (20.01.2016)

Great option from budget to dream gun. Slick nickel surface for easy cleaning and corrosion protection. Clean break with zero creep. Great trigger at a great price!

Serviceable trigger for duty use (04.02.2016)

Real nice trigger for the money. Way better than milspec with a clean 6lb brake and very positive reset. BCM trigger replaced the nasty stock trigger in my Sig 516 patrol rifle.

Best dollar value AR trigger (07.04.2016)

better than any i have tried (06.05.2016)

Worth the money. (11.09.2016)

Really good trigger for the money. Trigger pull gauge shows around 5 1/2 pounds, with no creep or grittiness.

Impressive (07.10.2016)

Excellent AR Trigger (09.11.2016)

You will be very pleased and then some. (29.11.2016)

I've bought several of these for my builds and you can't go wrong. A fantastic trigger for the price and don't shy away because of that. No cons to this trigger at all.

My wife prefers this to the G2S! (16.05.2017)

Great Combat Trigger (27.05.2017)

Love this trigger (04.07.2017)

Love this trigger. Everything about it is SMOOTH. Every build from now on will have this.

Good for the money, otherwise just ok (30.08.2017)

A good trigger (16.06.2018)

Best for the money (22.09.2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie

WILSON CASE GAGE - L.E. WILSON 44-40 WINCHESTER CASE GAGE

L.E. WILSON 44-40 WINCHESTER CASE GAGE
WILSON CASE GAGE

L.E. WILSON, INC.

Riordinato

CHF 49.90 * CHF 42.90 - CHF 69.90*

Case Gauges & Headspace Tools

4.9

FORSTER PRODUCTS, INC. 6MM CREEDMOOR MICROMETER SEATER DIE
ULTRA™ MICROMETER SEATER DIES

FORSTER PRODUCTS, INC.

In magazzino

CHF 159.90 * CHF 124.90 - CHF 174.90*

Dies per carabina

4.3

RADIAN WEAPONS AR-15 TALON SAFETY SELECTOR AMBIDEXTROUS BLACK
AR-15 TALON SAFETY SELECTOR AMBIDEXTROUS

RADIAN WEAPONS

In magazzino

CHF 94.90 * CHF 94.90 - CHF 109.90*

Sicurezze

SINCLAIR INTERNATIONAL 338 LAPUA PRIMING TOOL HEAD
SINCLAIR PRIMING TOOL

SINCLAIR INTERNATIONAL

Riordinato

CHF 22.90 * CHF 22.90 - CHF 144.90*

Accessori per innescatori | Utensili manuali

4.5

STRIKE INDUSTRIES AR ENHANCED LOWER RECEIVER PARTS KIT LESS TRIGGER
AR ENHANCED LOWER RECEIVER PARTS KIT

STRIKE INDUSTRIES

In magazzino

CHF 94.90 * CHF 94.90 - CHF 114.90*

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.