Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
SPECS: 4140 steel, chrome moly (CM), in the white or 416 stainless steel (SS), satin finish. 2-5⁄8" (6.6cm) long. Outside diameter; #01 - .560" (14.2mm)
Plus...
Prêt-à-adaptent freins améliorent recul de contrôle
Le frein multi-port adoucit le recul et réduit l'élévation du museau. Une seule chambre d'expansion et 42 ports totaux, 21 de chaque côté, inclinées à 7 ° vers l'avant, offrent un contrôle de recul maximal. La Forge est exigée. Livré avec un trou de sortie de 220 "(nominal) de diamètre qui doit être ouvert jusqu'à .020" plus grand que le diamètre de la balle. Peut être agrandi pour permettre des balles jusqu'au calibre. 44. L'extérieur arrière de la maquette peut être usiné pour se conformer au baril.
Spécifications : 4140 acier, chrome moly (CM), dans le blanc ou 416 inox (SS), finition satin. 2-5 ⁄ 8"(6,6 cm) de long. Diamètre extérieur ; #01 -. 560"(14,2 mm)
Plus...
Évaluations client de SHREWD #01 MUZZLE BRAKE 22 CALIBER 7/16-28 SS SILVER
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
works as advertised(16.12.2013)
These brakes do exactly what they are designed to do. I install several a month and the customers rave about the results. Here in NM the Youth Hunts each fall see the youngsters going after deer, elk and oryx with rifles up to the 300 magnums. These brakes tame even the big magnums to the point that they do not intimidate the young or small framed shooters.
Works Wonderfully !(12.09.2015)
Just boght a 30/06 with this on it and no recoil pad. Makes the 06 shoot like a.223 ! . Can Not praise Enough . This Works !
Référence: 860101028 SHREWD #01 MUZZLE BRAKE 22 CALIBER 7/16-28 SS SILVER Ref Fabricant: NONE Le frein multi-port adoucit le recul et réduit l'élévation du museau. Une seule chambre d'expansion et 42 ports totaux, 21 de chaque côté, inclinées à 7 ° vers l'avant, offrent un contrôle de recul maximal. La Forge est exigée. Livré avec un trou de sortie de 220 "(nominal) de diamètre qui doit être ouvert jusqu'à .020" plus grand que le diamètre de la balle. Peut être agrandi pour permettre des balles jusqu'au calibre. 44. L'extérieur arrière de la maquette peut être usiné pour se conformer au baril.
79.9CHF12CHF 79.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 860100028 SHREWD #01 MUZZLE BRAKE 22 CALIBER 7/16-28 CHROME MOLY SILVER Ref Fabricant: NONE Le frein multi-port adoucit le recul et réduit l'élévation du museau. Une seule chambre d'expansion et 42 ports totaux, 21 de chaque côté, inclinées à 7 ° vers l'avant, offrent un contrôle de recul maximal. La Forge est exigée. Livré avec un trou de sortie de 220 "(nominal) de diamètre qui doit être ouvert jusqu'à .020" plus grand que le diamètre de la balle. Peut être agrandi pour permettre des balles jusqu'au calibre. 44. L'extérieur arrière de la maquette peut être usiné pour se conformer au baril.
79.9CHF7CHF 79.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel.
SPECS: 4140 steel, chrome moly (CM), in the white or 416 stainless steel (SS), satin finish. 2-5⁄8" (6.6cm) long. Outside diameter; #01 - .560" (14.2mm)
Plus...
Prêt-à-adaptent freins améliorent recul de contrôle
Le frein multi-port adoucit le recul et réduit l'élévation du museau. Une seule chambre d'expansion et 42 ports totaux, 21 de chaque côté, inclinées à 7 ° vers l'avant, offrent un contrôle de recul maximal. La Forge est exigée. Livré avec un trou de sortie de 220 "(nominal) de diamètre qui doit être ouvert jusqu'à .020" plus grand que le diamètre de la balle. Peut être agrandi pour permettre des balles jusqu'au calibre. 44. L'extérieur arrière de la maquette peut être usiné pour se conformer au baril.
Spécifications : 4140 acier, chrome moly (CM), dans le blanc ou 416 inox (SS), finition satin. 2-5 ⁄ 8"(6,6 cm) de long. Diamètre extérieur ; #01 -. 560"(14,2 mm)
Plus...
Évaluations client de SHREWD #01 MUZZLE BRAKE 22 CALIBER 7/16-28 SS SILVER
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
works as advertised(16.12.2013)
These brakes do exactly what they are designed to do. I install several a month and the customers rave about the results. Here in NM the Youth Hunts each fall see the youngsters going after deer, elk and oryx with rifles up to the 300 magnums. These brakes tame even the big magnums to the point that they do not intimidate the young or small framed shooters.
Works Wonderfully !(12.09.2015)
Just boght a 30/06 with this on it and no recoil pad. Makes the 06 shoot like a.223 ! . Can Not praise Enough . This Works !