The Geissele Suppressor Alignment rod is a precision gauge used to verify the alignment of a suppressor to the bore of a firearm barrel. Note: Suppressor alignment is determined by several factors: Centerline alignment (offset and angular) of the barrel threads to the bore. Perpendicularity of the barrel shoulder to the threads. Alignment of the muzzle device’s internal diameter threads and torque shoulder to the suppressor attachment geometry. Alignment of the suppressor mounting ID geometry to the bore of the suppressor.
SPECS: 7.62mm 0.297" O.D.
Mehr...
Der Geissele Suppressor Alignment-Stab ist ein Präzisionsmessgerät, mit dem die Ausrichtung eines Suppressors zur Bohrung eines Schusswaffenrohrs überprüft wird. Hinweis: Die Ausrichtung des Unterdrückers wird von mehreren Faktoren bestimmt: Mittellinienausrichtung (Versatz und Winkel) der Laufgewinde zur Bohrung. Rechtwinkligkeit der Laufschulter zu den Gewinden. Ausrichtung des Innendurchmessers des Mündungsgeräts und der Drehmomentschulter auf die Geometrie des Suppressoraufsatzes. Ausrichtung der Geometrie des Suppressor-Montage-IDs an der Bohrung des Suppressors.
SPEZIFIKATIONEN: 7,62 mm 0,297 "O.D.
Mehr...
Kundenbewertungen zu GEISSELE AUTOMATICS LLC 17" 7.62MM SUPPRESSOR ALIGNMENT ROD
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Precision Alignment Tool(30.05.2018)
I bought this for my IWI.300BLK with a 30-cal suppressor. It works perfectly! I can also use it on my AR-10. You slide the rod into the barrel, and let it protrude slightly out the suppressor. You can instantly see if you have even clearance all around, a slight off-angle, or are lined up for disaster. It is perfect for aligning the suppressor, direct thread or QD adapter. I also bought the 9mm and .223 sizes. I would not want to be without it when reassembling after cleaning.
Artikel-Nr.: 100015136 GEISSELE AUTOMATICS LLC 17" 7.62MM SUPPRESSOR ALIGNMENT ROD Herstellerproduktnummer: 10260F854014005250 Der Geissele Suppressor Alignment-Stab ist ein Präzisionsmessgerät, mit dem die Ausrichtung eines Suppressors zur Bohrung eines Schusswaffenrohrs überprüft wird. Hinweis: Die Ausrichtung des Unterdrückers wird von mehreren Faktoren bestimmt: Mittellinienausrichtung (Versatz und Winkel) der Laufgewinde zur Bohrung. Rechtwinkligkeit der Laufschulter zu den Gewinden. Ausrichtung des Innendurchmessers des Mündungsgeräts und der Drehmomentschulter auf die Geometrie des Suppressoraufsatzes. Ausrichtung der Geometrie des Suppressor-Montage-IDs an der Bohrung des Suppressors.
The Geissele Suppressor Alignment rod is a precision gauge used to verify the alignment of a suppressor to the bore of a firearm barrel. Note: Suppressor alignment is determined by several factors: Centerline alignment (offset and angular) of the barrel threads to the bore. Perpendicularity of the barrel shoulder to the threads. Alignment of the muzzle device’s internal diameter threads and torque shoulder to the suppressor attachment geometry. Alignment of the suppressor mounting ID geometry to the bore of the suppressor.
SPECS: 7.62mm 0.297" O.D.
Mehr...
Der Geissele Suppressor Alignment-Stab ist ein Präzisionsmessgerät, mit dem die Ausrichtung eines Suppressors zur Bohrung eines Schusswaffenrohrs überprüft wird. Hinweis: Die Ausrichtung des Unterdrückers wird von mehreren Faktoren bestimmt: Mittellinienausrichtung (Versatz und Winkel) der Laufgewinde zur Bohrung. Rechtwinkligkeit der Laufschulter zu den Gewinden. Ausrichtung des Innendurchmessers des Mündungsgeräts und der Drehmomentschulter auf die Geometrie des Suppressoraufsatzes. Ausrichtung der Geometrie des Suppressor-Montage-IDs an der Bohrung des Suppressors.
SPEZIFIKATIONEN: 7,62 mm 0,297 "O.D.
Mehr...
Kundenbewertungen zu GEISSELE AUTOMATICS LLC 17" 7.62MM SUPPRESSOR ALIGNMENT ROD
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Precision Alignment Tool(30.05.2018)
I bought this for my IWI.300BLK with a 30-cal suppressor. It works perfectly! I can also use it on my AR-10. You slide the rod into the barrel, and let it protrude slightly out the suppressor. You can instantly see if you have even clearance all around, a slight off-angle, or are lined up for disaster. It is perfect for aligning the suppressor, direct thread or QD adapter. I also bought the 9mm and .223 sizes. I would not want to be without it when reassembling after cleaning.