Drop-in replacement for factory magazine catch has a unique, convex button surface to ensure positive finger contact for fast magazine changes under pressure. Crisp, 30 lpi serrations further aid in fumble-free engagement; .045" longer than factory part for extra leverage without creating an unwanted protrusion that snags on clothing, holster, or other gear. Tumbled and bead-blasted for a uniform, matte finish with rounded “dehorned” edges. Interior of the catch is relieved to enable instant magazine free-fall when you hit the button. Available in Carbon Steel with black manganese phosphate finish.
SPECS: Carbon steel black matte finish. Gunsmith fitting may be required.
Altro...
Rilascio veloce, positivo senza ingombro supplementare
Sostituzione per cattura rivista fabbrica ha una superficie convessa, unico pulsante per assicurare un contatto positivo dito per cambiamenti veloci rivista sotto pressione. Croccante, 30 lpi dentellature ulteriori aiuti in scontro di fumble-libero;. 045" più lungo parte della fabbrica per leva supplementare senza creare una protrusione indesiderati che strappi su abbigliamento, fondina o altri attrezzi. Caduto e pallinata per un'uniforme, finitura opaca, con bordi arrotondati dehorned. Interni delle catture sono sollevato per consentire l'immediata caduta libera rivista quando si preme il pulsante. Disponibile in acciaio al carbonio con nero manganese fosfato finitura o finitura naturale in acciaio inox.
Specifiche: acciaio al carbonio, nero o in acciaio inox, argento naturale, entrambi finitura opaca. Armaiolo di montaggio può essere richiesto.
Altro...
Punteggi dei clienti per 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 3.6
High Quality, Nicely Finished(30.12.2009)
A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.
10-8 magazine catch(27.03.2010)
This does provide a very positive and quick release of the magazine. It is a strong machined part. The slanted contour and serrations provide a very positive tactile surface. Fitting was required to get flush with the frame and to allow proper travel. If you have to file you will need to touch up the blueing. Overall, I like it better than your standard, checkered and extended catch.
10-8 magazine catch(27.03.2010)
This part does release the magazine very quickly with minimal presure. The slanted serrated surface provides a very positive tactile surface. I do like it better than similar, extended and checkered magazine releases.
Almost 5 stars(08.01.2012)
Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.
Expected more out of this part.....(14.10.2009)
I love beveled mag releases. Usually I buy a mag release and then have to have it custom beveled and serrated by a gunsmith. So, naturally I was excited when 10-8 started offering these. That's about where the excitement ends. The fit and finish of these parts is really disappointing.
not good(22.06.2010)
way to small and loose fitting in my Springfield operator. also noticed it had a jagged protruding edge machined on the inside. i like the curved button, and the finish is good, but the machine quality and fit is extremely poor.
Hands down, a good quality part.(01.04.2011)
I don't understand the bad reviews on this particular item. The machine quality is very good. As for the part fitting loose in the frame, I put this release into a Kimber frame with a near perfect fit, so based on the brand of your pistol, your mileage may vary. You will have to fit this part. REMEMBER: This is not a must, but I strongly advise to polish the mag catch lock as well, this will prevent it from dragging in the catch itself, making your release much more smooth. Overall I am very satisfied with this product. 10-8 makes good quality parts.
Great design, well executed(06.11.2011)
This is a great design concept. 1911 owners need to remember that there is no such thing as a guaranteed drop in part in the world of the 1911. Sometimes you get lucky and other times you have to have a competent gunsmith or armored fit it. There are simply too many manufacturers and variables to account for. That said, this part was easy for me to fit up and works great in my builds.
Can't use(21.07.2015)
It's machined well, but was tearing up Wilson Combat mags. I rounded the edge as much as possible, but it seems like the mags are galling terribly with each insertion.
Good looking mag catch, fit perfectly but still ended up in the trash.
It needs fitting(16.01.2017)
I bought one of these to complete a parts build on an RIA. I needed to be fitted around both the button and the mag lock areas. Additionally the interior lock needed to be relieved as well to make dropping magazines easier. The bevel feels very nice and the extended length feels right in my hands and I can drop magazines without breaking my grip (I wear XL gloves and have a set of VZ grips with the super scoop). Overall it's a button gentlemen, it works but it'll require fitting in most dimensions.
N. prodotto: 100003706 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK Parti Fabbricante: MAGCATCHC Sostituzione per cattura rivista fabbrica ha una superficie convessa, unico pulsante per assicurare un contatto positivo dito per cambiamenti veloci rivista sotto pressione. Croccante, 30 lpi dentellature ulteriori aiuti in scontro di fumble-libero;. 045" più lungo parte della fabbrica per leva supplementare senza creare una protrusione indesiderati che strappi su abbigliamento, fondina o altri attrezzi. Caduto e pallinata per un'uniforme, finitura opaca, con bordi arrotondati dehorned. Interni delle catture sono sollevato per consentire l'immediata caduta libera rivista quando si preme il pulsante. Disponibile in acciaio al carbonio con nero manganese fosfato finitura o finitura naturale in acciaio inox.
59.9CHF1CHF 59.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
1911
Finitura:
Manganese nero fosfataa
Mano:
Destro
Modello:
Government,Commander,Officers
Peso della spedizione: 0.091kgAltezza di spedizione: 8mmLarghezza di spedizione: 79mmLunghezza di spedizione: 127mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Drop-in replacement for factory magazine catch has a unique, convex button surface to ensure positive finger contact for fast magazine changes under pressure. Crisp, 30 lpi serrations further aid in fumble-free engagement; .045" longer than factory part for extra leverage without creating an unwanted protrusion that snags on clothing, holster, or other gear. Tumbled and bead-blasted for a uniform, matte finish with rounded “dehorned” edges. Interior of the catch is relieved to enable instant magazine free-fall when you hit the button. Available in Carbon Steel with black manganese phosphate finish.
SPECS: Carbon steel black matte finish. Gunsmith fitting may be required.
Altro...
Rilascio veloce, positivo senza ingombro supplementare
Sostituzione per cattura rivista fabbrica ha una superficie convessa, unico pulsante per assicurare un contatto positivo dito per cambiamenti veloci rivista sotto pressione. Croccante, 30 lpi dentellature ulteriori aiuti in scontro di fumble-libero;. 045" più lungo parte della fabbrica per leva supplementare senza creare una protrusione indesiderati che strappi su abbigliamento, fondina o altri attrezzi. Caduto e pallinata per un'uniforme, finitura opaca, con bordi arrotondati dehorned. Interni delle catture sono sollevato per consentire l'immediata caduta libera rivista quando si preme il pulsante. Disponibile in acciaio al carbonio con nero manganese fosfato finitura o finitura naturale in acciaio inox.
Specifiche: acciaio al carbonio, nero o in acciaio inox, argento naturale, entrambi finitura opaca. Armaiolo di montaggio può essere richiesto.
Altro...
Punteggi dei clienti per 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK
Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 3.6
High Quality, Nicely Finished(30.12.2009)
A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.
10-8 magazine catch(27.03.2010)
This does provide a very positive and quick release of the magazine. It is a strong machined part. The slanted contour and serrations provide a very positive tactile surface. Fitting was required to get flush with the frame and to allow proper travel. If you have to file you will need to touch up the blueing. Overall, I like it better than your standard, checkered and extended catch.
10-8 magazine catch(27.03.2010)
This part does release the magazine very quickly with minimal presure. The slanted serrated surface provides a very positive tactile surface. I do like it better than similar, extended and checkered magazine releases.
Almost 5 stars(08.01.2012)
Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.
Expected more out of this part.....(14.10.2009)
I love beveled mag releases. Usually I buy a mag release and then have to have it custom beveled and serrated by a gunsmith. So, naturally I was excited when 10-8 started offering these. That's about where the excitement ends. The fit and finish of these parts is really disappointing.
not good(22.06.2010)
way to small and loose fitting in my Springfield operator. also noticed it had a jagged protruding edge machined on the inside. i like the curved button, and the finish is good, but the machine quality and fit is extremely poor.
Hands down, a good quality part.(01.04.2011)
I don't understand the bad reviews on this particular item. The machine quality is very good. As for the part fitting loose in the frame, I put this release into a Kimber frame with a near perfect fit, so based on the brand of your pistol, your mileage may vary. You will have to fit this part. REMEMBER: This is not a must, but I strongly advise to polish the mag catch lock as well, this will prevent it from dragging in the catch itself, making your release much more smooth. Overall I am very satisfied with this product. 10-8 makes good quality parts.
Great design, well executed(06.11.2011)
This is a great design concept. 1911 owners need to remember that there is no such thing as a guaranteed drop in part in the world of the 1911. Sometimes you get lucky and other times you have to have a competent gunsmith or armored fit it. There are simply too many manufacturers and variables to account for. That said, this part was easy for me to fit up and works great in my builds.
Can't use(21.07.2015)
It's machined well, but was tearing up Wilson Combat mags. I rounded the edge as much as possible, but it seems like the mags are galling terribly with each insertion.
Good looking mag catch, fit perfectly but still ended up in the trash.
It needs fitting(16.01.2017)
I bought one of these to complete a parts build on an RIA. I needed to be fitted around both the button and the mag lock areas. Additionally the interior lock needed to be relieved as well to make dropping magazines easier. The bevel feels very nice and the extended length feels right in my hands and I can drop magazines without breaking my grip (I wear XL gloves and have a set of VZ grips with the super scoop). Overall it's a button gentlemen, it works but it'll require fitting in most dimensions.