Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

10-8 PERFORMANCE
1911 EXTENDED MAGAZINE RELEASE

100003706

Fast, Positive Release Without Extra Bulk

Drop-in replacement for factory magazine catch has a unique, convex button surface to ensure positive finger contact for fast magazine changes under pressure. Crisp, 30 lpi serrations further aid in fumble-free engagement; .045" longer than factory part for extra leverage without creating an unwanted protrusion that snags on clothing, holster, or other gear. Tumbled and bead-blasted for a uniform, matte finish with rounded “dehorned” edges. Interior of the catch is relieved to enable instant magazine free-fall when you hit the button. Available in Carbon Steel with black manganese phosphate finish.

SPECS: Carbon steel black matte finish. Gunsmith fitting may be required.

Altro...

Rilascio veloce, positivo senza ingombro supplementare

Sostituzione per cattura rivista fabbrica ha una superficie convessa, unico pulsante per assicurare un contatto positivo dito per cambiamenti veloci rivista sotto pressione. Croccante, 30 lpi dentellature ulteriori aiuti in scontro di fumble-libero;. 045" più lungo parte della fabbrica per leva supplementare senza creare una protrusione indesiderati che strappi su abbigliamento, fondina o altri attrezzi. Caduto e pallinata per un'uniforme, finitura opaca, con bordi arrotondati dehorned. Interni delle catture sono sollevato per consentire l'immediata caduta libera rivista quando si preme il pulsante. Disponibile in acciaio al carbonio con nero manganese fosfato finitura o finitura naturale in acciaio inox.

Specifiche: acciaio al carbonio, nero o in acciaio inox, argento naturale, entrambi finitura opaca. Armaiolo di montaggio può essere richiesto.

Altro...

Punteggi dei clienti per 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 3.6

High Quality, Nicely Finished (30.12.2009)

A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.

10-8 magazine catch (27.03.2010)

This does provide a very positive and quick release of the magazine. It is a strong machined part. The slanted contour and serrations provide a very positive tactile surface. Fitting was required to get flush with the frame and to allow proper travel. If you have to file you will need to touch up the blueing. Overall, I like it better than your standard, checkered and extended catch.

10-8 magazine catch (27.03.2010)

This part does release the magazine very quickly with minimal presure. The slanted serrated surface provides a very positive tactile surface. I do like it better than similar, extended and checkered magazine releases.

Almost 5 stars (08.01.2012)

Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.

Expected more out of this part..... (14.10.2009)

I love beveled mag releases. Usually I buy a mag release and then have to have it custom beveled and serrated by a gunsmith. So, naturally I was excited when 10-8 started offering these. That's about where the excitement ends. The fit and finish of these parts is really disappointing.

not good (22.06.2010)

way to small and loose fitting in my Springfield operator. also noticed it had a jagged protruding edge machined on the inside. i like the curved button, and the finish is good, but the machine quality and fit is extremely poor.

Hands down, a good quality part. (01.04.2011)

I don't understand the bad reviews on this particular item. The machine quality is very good. As for the part fitting loose in the frame, I put this release into a Kimber frame with a near perfect fit, so based on the brand of your pistol, your mileage may vary. You will have to fit this part. REMEMBER: This is not a must, but I strongly advise to polish the mag catch lock as well, this will prevent it from dragging in the catch itself, making your release much more smooth. Overall I am very satisfied with this product. 10-8 makes good quality parts.

Great design, well executed (06.11.2011)

This is a great design concept. 1911 owners need to remember that there is no such thing as a guaranteed drop in part in the world of the 1911. Sometimes you get lucky and other times you have to have a competent gunsmith or armored fit it. There are simply too many manufacturers and variables to account for. That said, this part was easy for me to fit up and works great in my builds.

Can't use (21.07.2015)

It's machined well, but was tearing up Wilson Combat mags. I rounded the edge as much as possible, but it seems like the mags are galling terribly with each insertion.

Good looking mag catch, fit perfectly but still ended up in the trash.

It needs fitting (16.01.2017)

I bought one of these to complete a parts build on an RIA. I needed to be fitted around both the button and the mag lock areas. Additionally the interior lock needed to be relieved as well to make dropping magazines easier. The bevel feels very nice and the extended length feels right in my hands and I can drop magazines without breaking my grip (I wear XL gloves and have a set of VZ grips with the super scoop). Overall it's a button gentlemen, it works but it'll require fitting in most dimensions.

Leggi più recensioni su brownells.com

59.9 59.9 1 CHF

N. prodotto: 100003706
10-8 PERFORMANCE MAGAZINE RELEASE, BLACK
Parti Fabbricante: MAGCATCHC Sostituzione per cattura rivista fabbrica ha una superficie convessa, unico pulsante per assicurare un contatto positivo dito per cambiamenti veloci rivista sotto pressione. Croccante, 30 lpi dentellature ulteriori aiuti in scontro di fumble-libero;. 045" più lungo parte della fabbrica per leva supplementare senza creare una protrusione indesiderati che strappi su abbigliamento, fondina o altri attrezzi. Caduto e pallinata per un'uniforme, finitura opaca, con bordi arrotondati dehorned. Interni delle catture sono sollevato per consentire l'immediata caduta libera rivista quando si preme il pulsante. Disponibile in acciaio al carbonio con nero manganese fosfato finitura o finitura naturale in acciaio inox.

59.9 CHF 1 CHF 59.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911 Finitura: Manganese nero fosfataa Mano: Destro Modello: Government, Commander, Officers

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: 1911 Finitura: Manganese nero fosfataa Mano: Destro Modello: Government,Commander,Officers Peso della spedizione: 0.091kg Altezza di spedizione: 8mm Larghezza di spedizione: 79mm Lunghezza di spedizione: 127mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Fast, Positive Release Without Extra Bulk

SPECS: Carbon steel black matte finish. Gunsmith fitting may be required.

Altro...

Rilascio veloce, positivo senza ingombro supplementare

Specifiche: acciaio al carbonio, nero o in acciaio inox, argento naturale, entrambi finitura opaca. Armaiolo di montaggio può essere richiesto.

Altro...

Punteggi dei clienti per 10-8 PERFORMANCE MAGAZINE RELEASE, BLACK

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 3.6

High Quality, Nicely Finished (30.12.2009)

A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.

10-8 magazine catch (27.03.2010)

Almost 5 stars (08.01.2012)

Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.

Expected more out of this part..... (14.10.2009)

not good (22.06.2010)

Hands down, a good quality part. (01.04.2011)

Great design, well executed (06.11.2011)

Can't use (21.07.2015)

It needs fitting (16.01.2017)

Leggi più recensioni su brownells.com

Scelti da altri clientie

WILSON COMBAT WILSON KIT # 324C
#324 "C", COLT COMMANDER .45 ACP SPRING KIT

WILSON COMBAT

In magazzino

CHF 25.90 *

Kit di molle

ED BROWN MAG CATCH SPRING, COMPETITION
MAGAZINE CATCH SPRING FOR 1911

ED BROWN

In magazzino

CHF 15.90 *

Molle sgancio caricatore

GHOST BULLET FORWARD SLIDE RELEASE
SLIDE RELEASE FOR GLOCK®

GHOST

In magazzino

CHF 29.90 * CHF 24.90 - CHF 29.90*

Fermi carrello

4.3

0VERSIZE FIRING PIN STOP FOR REAR SIGHT CUT - EGW O/S FIRING PIN STOP SER 70 9/38/40 FOR REAR SIGHT CUT BLUE

EGW O/S FIRING PIN STOP SER 70 9/38/40 FOR REAR SIGHT CUT BLUE
0VERSIZE FIRING PIN STOP FOR REAR SIGHT CUT

EGW

In magazzino

CHF 27.90 * CHF 27.90 - CHF 35.90*

Percussore

ED BROWN ALLEN HEAD GRIP SCREWS BLUED QUANITY 4
1911 ALLEN HEAD GRIP SCREWS

ED BROWN

In magazzino

CHF 18.90 * CHF 18.90 - CHF 69.90*

Viti per guancette

4.2

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.