Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

EGW
1911 AUTO PLUNGER TUBE STAKING TOOL

841370108640 296000123
Protects The Tube & Frame From Damage; No Need To Remove Ejector
Two-piece staking tool protects the plunger tube and surrounding frame area with a block of machined Delrin® while you spread the pins with the steel staking bar. Eliminates metal-on-metal contact on exterior surfaces to prevent scratches that can mar the pistol’s finish. Saves you time, too, because the staking bar has a cutout to clear the ejector, so you can stake the tube without having to remove it. The staking point is a hardened steel screw that lets you adjust the staking depth. When the point wears out, simply install a new screw (spare included) to make the tool good as new. Delrin block has cutouts to support both rounded and square plunger tubes; cuts are positioned so the block always rests on a flat side to provide full support.

SPECS: Steel, black oxide finish, and machined Delrin.

48.9 48.9 1 CHF
Référence: 296000123
EGW PLUNGER TUBE STAKING TOOL
Ref Fabricant: 70550 841370108640 Outil de jalonnement en deux parties protège le tube plongeur et les environs de cadre avec un bloc de Delrin usiné ® alors que vous étalez les broches avec la barre en acier de jalonnement. Élimine le contact métal sur métal sur les surfaces extérieures afin d'éviter les rayures qui peuvent égratigner fini du pistolet. Économise du que temps, aussi, parce que la barre de jalonnement a une découpe pour dégager l'éjecteur, donc vous pouvez jalonner le tube sans avoir à l'enlever. Le jalonnement est une vis en acier trempée qui vous permet de régler la profondeur de jalonnement. Quand le point s'use, il suffit d'installer une nouvelle vis (pièce de rechange inclus) de réparer l'outil comme neuf. Bloc de Delrin a prédécoupes pour soutenir les deux tubes ronds et carrés de piston ; coupes sont positionnés pour le bloc repose toujours sur un côté plat pour fournir un support complet.
48.9 CHF 0 CHF 48.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: 1911

Caractéristiques

Manufacture: 1911 Poids du colis: 0.113kg Hauteur d'expédition: 10mm Largeur d'expédition: 97mm Longueur d'expédition: 157mm

Détails de l'article

Fabriqué au USA



Protects The Tube & Frame From Damage; No Need To Remove Ejector
Two-piece staking tool protects the plunger tube and surrounding frame area with a block of machined Delrin® while you spread the pins with the steel staking bar. Eliminates metal-on-metal contact on exterior surfaces to prevent scratches that can mar the pistol’s finish. Saves you time, too, because the staking bar has a cutout to clear the ejector, so you can stake the tube without having to remove it. The staking point is a hardened steel screw that lets you adjust the staking depth. When the point wears out, simply install a new screw (spare included) to make the tool good as new. Delrin block has cutouts to support both rounded and square plunger tubes; cuts are positioned so the block always rests on a flat side to provide full support.

SPECS: Steel, black oxide finish, and machined Delrin.

Newsletter