Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

WILSON COMBAT
1911 BEAVERTAIL FITTING JIG

874218001735 965402000

Takes The Guesswork Out Of Beavertail Fitting

Provides a precise guide for cutting the frame tangs on 1911 Auto frames; makes short work of installing Wilson High-Ride Beavertails. Install on frame and file up to guide; file will not cut the hardened jig. Remove jig and sand or file to fit.

SPECS: Steel, in-the-white, hardened. Includes jig, fasteners and instructions. Fits Wilson and Clark beavertails.

Altro...

Prende il congetture di raccordo a coda di castoro

Fornisce una guida precisa per il taglio i codoli telaio 1911 automatico cornici; rende breve lavoro di installazione di Wilson High-Ride Beavertails. Installare sul telaio e file fino a guida; file non taglierà il jig indurito. Rimuovere giga e sabbia o file per adattarsi.

Specifiche: in acciaio, in bianco e indurito. Include jig, elementi di fissaggio e istruzioni. Si inserisce la Wilson e Clark beavertails.

Altro...

Punteggi dei clienti per WILSON COMBAT BEAVERTAIL FITTING JIG

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.3

Easy to use, but labor intensive (11.10.2009)

When drop in beavertails aren't available, you should use a jig - one with the same radius as the new beavertail for best fit. Should buy beavertail & jig made by same company. Provided instructions were pretty basic, but intuitive - mount jig & cut frame to jig surface. At that point, you're not finished. Must trim frame a bit at a time until holes in frame & jig line up. Then finish triming the beavertail tab (the hardest part) to make grip safety/trigger/sear/hammer work. Use old grip safety for reference.
Pics on my instructions were poor to black, but not really needed. Cutting can be done w/fine hobby bench grinder, fine files, & Cratex tools. Metal on jig is very hard & difficult to damage. First job took long time, next will be 1/2 as much. Came out really nice for my first job as a rank amateur.

Great tool! (19.06.2011)

I have fit BT safeties in the past by hand and it took a long time to get it done and look good. Using this tool it took about 1 hour from start to final lapping of the safety. The jig is super hard and the file just bounces off of it. It will get you close then some layout fluid or permanent marker and test to get that last whisker of metal removed and have a perfect fit.

The only downside is the instructions. They pretty much are useless.

Great Tool (21.10.2011)

Great tool and very easy to use, simply screw it on the frame and file till you hit the jig. The Jig will get you about 95% of the way to a perfect fit, the other 5% is slow freehand filing. I used this with a wilson beavertail for a perfect fit.

Wonderful tool (16.12.2011)

This jig made my beavertail fitting time go from 3 hours to 1. once done with the file I only needed to fine tune a couple high spots and hit it with some emery cloth. I used wilsons beavertail and it fit perfectly

Nice little piece. (24.04.2012)

This is a nice little jig that will make things a lot easier fitting the beavertail on my Officers ACP though i must say that the instructions are a joke, why even think of including example pictures when they are just black smears on the paper.. Seriously.

Great product for W. C. Beavertails (26.02.2017)

This is a must have product if you are going to install a Wilson Combat Beavertail. The instructions can be better however after a little investigation itâs easy enough to understand. I rated this 4 out of 5 stars as I've used this on several model 1911's and on a few, some additional prep work was needed in order to make the grip function properly.

Leggi più recensioni su brownells.com

43.9 43.9 1 CHF

N. prodotto: 965402000
WILSON COMBAT BEAVERTAIL FITTING JIG
Parti Fabbricante: 402 874218001735 Fornisce una guida precisa per il taglio i codoli telaio 1911 automatico cornici; rende breve lavoro di installazione di Wilson High-Ride Beavertails. Installare sul telaio e file fino a guida; file non taglierà il jig indurito. Rimuovere giga e sabbia o file per adattarsi.

43.9 CHF 3 CHF 43.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: 1911

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: 1911 Peso della spedizione: 0.041kg Altezza di spedizione: 18mm Larghezza di spedizione: 79mm Lunghezza di spedizione: 122mm

Dettagli dell'elemento

Made in Usa

Takes The Guesswork Out Of Beavertail Fitting

SPECS: Steel, in-the-white, hardened. Includes jig, fasteners and instructions. Fits Wilson and Clark beavertails.

Altro...

Prende il congetture di raccordo a coda di castoro

Specifiche: in acciaio, in bianco e indurito. Include jig, elementi di fissaggio e istruzioni. Si inserisce la Wilson e Clark beavertails.

Altro...

Punteggi dei clienti per WILSON COMBAT BEAVERTAIL FITTING JIG

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.3

Easy to use, but labor intensive (11.10.2009)

Great tool! (19.06.2011)

Great Tool (21.10.2011)

Wonderful tool (16.12.2011)

Nice little piece. (24.04.2012)

Great product for W. C. Beavertails (26.02.2017)

Leggi più recensioni su brownells.com

Scelti da altri clientie

WILSON COMBAT BLUE EXT. SLIDE RELEASE
1911 EXTENDED SLIDE RELEASE

WILSON COMBAT

In magazzino

CHF 54.90 * CHF 54.90 - CHF 64.90*

Fermi carrello

3.8

BROWNELLS AR-15 GAS TUBE PISTOL LENGTH BLACK NITRIDE
AR-15 GAS TUBES BLACK NITRIDE

BROWNELLS

In magazzino

CHF 22.90 * CHF 22.90 - CHF 23.90*

Gas Tubes

ED BROWN BROWN BEAVERTAIL JIG
1911 BEAVERTAIL INSTALLATION JIG

ED BROWN

In magazzino

CHF 49.90 *

Strumenti per guancette

4.8

ED BROWN DROP-IN MAXI-WELL, SS/SNAKESKIN LPI
1911 DROP-IN MAXI-WELL

ED BROWN

In magazzino

CHF 119.90 * CHF 119.90 - CHF 129.90*

Dorsalino

4.6

BROWNELLS REBOUND SLIDE SPRING TOOL FOR S&W
S&W REBOUND SLIDE SPRING TOOL

BROWNELLS

Riordinato

CHF 31.90 *

Utensili mire

3.4

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.