Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

JOHN MASEN
1911 GRIP SAFETY/THUMB SAFETY

560453601

U.S.-Made Parts For The 1911 Auto Pistol

Each and every part is U.S.-made, high-quality and guaranteed to fit and function just like the factory part.

SPECS: Fits 1911 Auto. All parts carbon steel. (B) indicates blued finish, (S) indicates stainless steel.

Plus...

Pièces fabriqués aux États-Unis pour le pistolet automatique de 1911

Chaque partie est fabriqué aux États-Unis, qualité et garantie pour s'adapter et fonctionnent à l'instar de la partie de l'usine.

Caractéristiques : s'adapte automatique 1911. Toutes les pièces en acier au carbone. (B) indique une finition bleuie, (S) indique en acier inoxydable.

Plus...

Évaluations client de JOHN MASEN SAFETY LOCK (THUMB SAFETY) (B)

Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 2.3

Is the low price worth your time? (29.01.2015)

Buy if you're on a budget and have skills. Avoid if "drop-in" were the first words in your query. I'm applying this part to a new SS receiver and immediately noted the body of the safety does not sit flush against the receiver body. Two aspects to this; the grip safety pin is not exactly perpendicular to the body of the safety and casting imperfections on the inside surface. This part requires significant fitting/stoning/blasting (and time) to adequately fit, function and look pretty. All this said, economizing on this part and a JTM grip safety allowed me to afford other, more desired, parts for this build. Two stars for overall value but falls short of even parts-bucket quality/fit/function.

Avoid (14.01.2017)

The spring detent notch on front of safety does not have enough material below it to prevent the safety plunger from dropping below the front lower edge of the safety casting and locking up the safety.

Not the best (28.07.2018)

The item I got had a very long arm that needed more than a little trimming, just to fit in the receiver. The receiver is an ATI - maybe suspect - but several old Colt safeties fit (and work) just fine.

Well folks, by the time I carefully fit the LENGTH of the arm, it became evident that the width of the arm (top to bottom) was insufficient to actually do anything. That is to say, the little nub at the end of the arm didn't swing down enough to intersect the back of the trigger bow. Bummer.

My first thought was that the hooks that intersect the top of the mainspring housing need adjustment to allow the safety to swing further. But this turned out not to be the case. Instead, after close comparison with the ATI grip safety and the old Colt grip safeties, its quite evident that this safety quite a bit "out of spec". Its like... its bent? Cant unbend it, but I can weld up the arm and recut the entire piece. However, if I wanted to resort to that, I could have just done that to the original (which did block the hammer somewhat, but allowed too much rearward travel, allowing the sear to partially disengage... nice, right from ATI that way, but heck its a $300 1911....!!!)

Sorry, this one's a dud.

good product (27.07.2010)

plenty of meat in the trigger bar, good fit, finish.

Decent Gear (17.01.2011)

Used as a replacement on a basic 1911, this did the job without much hassle. It's also inexpensive enough that if you have to do any work on it yourself and you do screw it up, you're not out much money. Installed pretty easily and was easy to work with. Decent piece of gear. - Be sure to test-fit parts before installing them, as this won't work with some modern rounded hammers that meant for beavertails that have an indention/hammer recess cut. This is meant for GI-style hammer spurs. Make sure you test fit it before you start putting pins in, or you'll have to fight to disassemble it.

Horrible finish (16.08.2011)

Unless your going to re-blue the part, don't bother. Their idea of blued finish looks like a rust brown. I was refinishing the gun anyway and bluing it but for a drop in, you would be seriously disappointed in the finish. Heavy casting and grind marks in the one I got too. I ending up bead blasting and sanding the finish smooth before I blued it. More effort than what I was looking for.

Poor Quality (27.11.2011)

Uneven cut, uneven grind finish, purchased a cheap part to modify. Casting was full of holes. Not evenly ground

great bang for the buck (11.04.2012)

replaced a worn remington r1 grip safety. took all five minutes to replace. above average finish as you can see in the picture.

Poor Quality (30.10.2012)

Purchased this Grip Safety to replace a cosmetically worn Series 80 grip safety. Part is for Series 70 only, but can be filed to work in Series 80 gun.

Part is extremely poorly finished - large cast line down the center that can be felt quite easily, and the black/blue finish is finely scratched everywhere.

Stay away from Masen parts - they are garbage.

Works (22.08.2015)

Functions as a safety but does not have a good finish and casting edges. Can't beat the cost though.

Avoid (18.04.2018)

The finish was better than expected, but when installed the arm did not contact the trigger stirrup. When compared to a surplus GI grip safety, the trigger block arm was significantly higher on the Masen part. Called technical support for advice and was told I should've bought a better quality grip safety.

Lire 11 plus d'avis sur brownells.com

29.9 29.9 2 CHF

Référence: 560453601
JOHN MASEN SAFETY LOCK (THUMB SAFETY) (B)
Ref Fabricant: 4536B Chaque partie est fabriqué aux États-Unis, qualité et garantie pour s'adapter et fonctionnent à l'instar de la partie de l'usine.

29.9 CHF 18 CHF 29.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Finition: Bronzé Main: Droit Manufacture: 1911 Modèle: Government, Commander, Officers Style: Pouce

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Finition: Bronzé Main: Droit Manufacture: 1911 Modèle: Government,Commander,Officers Style: Pouce Poids du colis: 0.009kg Hauteur d'expédition: 4mm Largeur d'expédition: 80mm Longueur d'expédition: 122mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Référence: 560453501
JOHN MASEN GRIP SAFETY, GOVT. (B)
Ref Fabricant: 4535B Chaque partie est fabriqué aux États-Unis, qualité et garantie pour s'adapter et fonctionnent à l'instar de la partie de l'usine.

29.9 CHF 0 CHF 29.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Finition: Bronzé Main: Droit Manufacture: 1911 Modèle: Government, Commander, Officers Style: PoignÃ©e

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

U.S.-Made Parts For The 1911 Auto Pistol

Each and every part is U.S.-made, high-quality and guaranteed to fit and function just like the factory part.

SPECS: Fits 1911 Auto. All parts carbon steel. (B) indicates blued finish, (S) indicates stainless steel.

Plus...

Pièces fabriqués aux États-Unis pour le pistolet automatique de 1911

Chaque partie est fabriqué aux États-Unis, qualité et garantie pour s'adapter et fonctionnent à l'instar de la partie de l'usine.

Caractéristiques : s'adapte automatique 1911. Toutes les pièces en acier au carbone. (B) indique une finition bleuie, (S) indique en acier inoxydable.

Plus...

Évaluations client de JOHN MASEN SAFETY LOCK (THUMB SAFETY) (B)

Nombre d'évaluations: 11
De brownells.com: 11
Note moyenne: 2.3

Is the low price worth your time? (29.01.2015)

Avoid (14.01.2017)

Not the best (28.07.2018)

good product (27.07.2010)

plenty of meat in the trigger bar, good fit, finish.

Decent Gear (17.01.2011)

Horrible finish (16.08.2011)

Poor Quality (27.11.2011)

Uneven cut, uneven grind finish, purchased a cheap part to modify. Casting was full of holes. Not evenly ground

great bang for the buck (11.04.2012)

replaced a worn remington r1 grip safety. took all five minutes to replace. above average finish as you can see in the picture.

Poor Quality (30.10.2012)

Works (22.08.2015)

Functions as a safety but does not have a good finish and casting edges. Can't beat the cost though.

Avoid (18.04.2018)

Lire 11 plus d'avis sur brownells.com

Poursuivre vos achats

WILSON COMBAT 1911 MAGAZINE RELEASE, BLUED
1911 "FACTORY PLUS" MAGAZINE RELEASE

WILSON COMBAT

Récommandé

CHF 38.90 * CHF 38.90 - CHF 39.90*

Verrous de chargeur

3.3

CYLINDER & SLIDE 1911 PIN SET
1911 COMPLETE PIN SET

CYLINDER & SLIDE

En stock

CHF 25.90 *

Goupilles Carcasse

3.5

BROWNELLS 1911 SCREW TAP (.150-50)
1911 STOCK TAPS

BROWNELLS

En stock

CHF 49.90 *

Outils à Fileter & Matrices

JOHN MASEN EXTENDED GRAY SLIDE STOP, SR
1911 EXTENDED SLIDE STOP

JOHN MASEN

En stock

CHF 46.90 *

Fermoirs Chariot de Culasse

2.8

PACHMAYR 1.1" MEDIUM BLACK STIPPLE FACE
F325 DELUXE WHITE LINE FIELD RECOIL PAD

PACHMAYR

En stock

CHF 48.90 * CHF 47.90 - CHF 48.90*

Universal

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.