Provides consistent accuracy through better production methods. Electro-discharge machined from 4140 steel, heat-treated to Rc 38-40, then vacuum tempered to help retain these tolerances for many years to come. One-piece blade is cut from solid steel barstock, so it won’t fly apart when your shot matters most. Consistent, click-adjustable detents for windage and elevation give precise repeatability.
SPECS: 4140 steel, blue, matte finish.
Altro...
Elettroerosione a filo prodotto per precisione Fit & funzione
Fornisce precisione coerente attraverso i migliori metodi di produzione. Elettroerosione lavorata da acciaio 4140, trattato termicamente per Rc 38-40, poi vuoto temperato per contribuire a mantenere queste tolleranze per molti anni a venire. Lama un pezzo è tagliato dal solido da barra d'acciaio, quindi non volare pezzi quando il colpo più importante. Dentelli coerente, scatto regolabile per la derivazione e l'elevazione dare precisa ripetibilità. Tutti i modelli tranne Accro presentano una lama seghettata pieno, Piazza angolo per riconoscimento migliore destinazione e una battuta tacca quadrata per definizione migliorata, "shadowless" vista frontale. Caratteristiche di BM #1 tacca profonda un. 020" più profonda vista tacca e dentellature superficiali più sottili rispetto a un modello standard per una più facile acquisizione del mirino. LPA adatta alla vista LPA tagliata trovata su Springfield Armory, Para-Ordnance, Nowlin, elevato Standard, Olympic Arms, e Charles Daly 1911 Autos con preinstallati regolabile posteriore punti panoramici.
Specifiche: 4140 acciaio, blu, finitura opaca. Lama -. 750"(19mm) larghezza, x. 430" (10.9 mm) altezza. Tacca -. 100"(2.5 mm) profondità (eccetto BM #1 tacca profonda e LPA),. 135" di larghezza. LPA- Tacca è. 115" x larga. 095" profondo. BM #1 Tacca profonda – tacca è. 135" largo x. 120" profondo.
Altro...
Punteggi dei clienti per Kensight Mfg ELLIASON/ACCRO REAR TARGET SIGHT
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.6
Well made sight(15.08.2012)
I have used several of these over the past few years. Just a small amount of fitting required to produce a snug fit. Precision made with repeatable adjustments.
Deeper notch is a big plus(06.08.2016)
I had the elevation screw break on the factory sight on my Colt Gold Cup, and decided to upgrade.
This sight is very high quality. Well machined with solid, definite clicks. The bigger notch helps me find the front sight easier and is wide enough to allow some "air" on each side. The fine serrations are well done. This sight allows me to shoot long range with greater ease.
Made in the USA is a big plus, from the great state of Georgia.
Elliason sight(15.02.2011)
I installed this sight on my Colt Python and love it fit perfectly, has very positive clicks and I love the serrated rear blade. looks identical and even says Elliason Awesome Product!!
Won't fit Combat Elite!(22.05.2018)
This will not fit a 1980s vintage Colt Combat Elite. These pistols have an Elliason sight, but retained by a 3/32" roll pin with the slide drilled for same. This sight has a 1/16" roll pin. The Combat Elite Elliason has a "hog belly" in the tang, allowing sufficient metal around the 3/32" hole. This sight does not have that feature and cannot simply be drilled out to 3/32".
Classic Target Sights(10.11.2009)
I have been shooting 1911s since the late 60s. I went from the classic G.I. issue sights to shooting Colt Gold Cups.
This style of sights is good for a person who carries a 1911 as a service pistol that has a need for precision shooting.
N. prodotto: 100002635 Kensight Mfg ELLIASON/ACCRO REAR TARGET SIGHT Parti Fabbricante: 850-301755377853017 Fornisce precisione coerente attraverso i migliori metodi di produzione. Elettroerosione lavorata da acciaio 4140, trattato termicamente per Rc 38-40, poi vuoto temperato per contribuire a mantenere queste tolleranze per molti anni a venire. Lama un pezzo è tagliato dal solido da barra d'acciaio, quindi non volare pezzi quando il colpo più importante. Dentelli coerente, scatto regolabile per la derivazione e l'elevazione dare precisa ripetibilità. Tutti i modelli tranne Accro presentano una lama seghettata pieno, Piazza angolo per riconoscimento migliore destinazione e una battuta tacca quadrata per definizione migliorata, "shadowless" vista frontale. Caratteristiche di BM #1 tacca profonda un. 020" più profonda vista tacca e dentellature superficiali più sottili rispetto a un modello standard per una più facile acquisizione del mirino. LPA adatta alla vista LPA tagliata trovata su Springfield Armory, Para-Ordnance, Nowlin, elevato Standard, Olympic Arms, e Charles Daly 1911 Autos con preinstallati regolabile posteriore punti panoramici.
99.9CHF7CHF 99.90
*
Tempi di consegna circa 8-15 giorni.
Caratteristiche:Adatto per: 1911Colore delle mire: BlackModello: Government, Commander, OfficersTipo: Target
Provides consistent accuracy through better production methods. Electro-discharge machined from 4140 steel, heat-treated to Rc 38-40, then vacuum tempered to help retain these tolerances for many years to come. One-piece blade is cut from solid steel barstock, so it won’t fly apart when your shot matters most. Consistent, click-adjustable detents for windage and elevation give precise repeatability.
SPECS: 4140 steel, blue, matte finish.
Altro...
Elettroerosione a filo prodotto per precisione Fit & funzione
Fornisce precisione coerente attraverso i migliori metodi di produzione. Elettroerosione lavorata da acciaio 4140, trattato termicamente per Rc 38-40, poi vuoto temperato per contribuire a mantenere queste tolleranze per molti anni a venire. Lama un pezzo è tagliato dal solido da barra d'acciaio, quindi non volare pezzi quando il colpo più importante. Dentelli coerente, scatto regolabile per la derivazione e l'elevazione dare precisa ripetibilità. Tutti i modelli tranne Accro presentano una lama seghettata pieno, Piazza angolo per riconoscimento migliore destinazione e una battuta tacca quadrata per definizione migliorata, "shadowless" vista frontale. Caratteristiche di BM #1 tacca profonda un. 020" più profonda vista tacca e dentellature superficiali più sottili rispetto a un modello standard per una più facile acquisizione del mirino. LPA adatta alla vista LPA tagliata trovata su Springfield Armory, Para-Ordnance, Nowlin, elevato Standard, Olympic Arms, e Charles Daly 1911 Autos con preinstallati regolabile posteriore punti panoramici.
Specifiche: 4140 acciaio, blu, finitura opaca. Lama -. 750"(19mm) larghezza, x. 430" (10.9 mm) altezza. Tacca -. 100"(2.5 mm) profondità (eccetto BM #1 tacca profonda e LPA),. 135" di larghezza. LPA- Tacca è. 115" x larga. 095" profondo. BM #1 Tacca profonda – tacca è. 135" largo x. 120" profondo.
Altro...
Punteggi dei clienti per Kensight Mfg ELLIASON/ACCRO REAR TARGET SIGHT
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.6
Well made sight(15.08.2012)
I have used several of these over the past few years. Just a small amount of fitting required to produce a snug fit. Precision made with repeatable adjustments.
Deeper notch is a big plus(06.08.2016)
I had the elevation screw break on the factory sight on my Colt Gold Cup, and decided to upgrade.
This sight is very high quality. Well machined with solid, definite clicks. The bigger notch helps me find the front sight easier and is wide enough to allow some "air" on each side. The fine serrations are well done. This sight allows me to shoot long range with greater ease.
Made in the USA is a big plus, from the great state of Georgia.
Elliason sight(15.02.2011)
I installed this sight on my Colt Python and love it fit perfectly, has very positive clicks and I love the serrated rear blade. looks identical and even says Elliason Awesome Product!!
Won't fit Combat Elite!(22.05.2018)
This will not fit a 1980s vintage Colt Combat Elite. These pistols have an Elliason sight, but retained by a 3/32" roll pin with the slide drilled for same. This sight has a 1/16" roll pin. The Combat Elite Elliason has a "hog belly" in the tang, allowing sufficient metal around the 3/32" hole. This sight does not have that feature and cannot simply be drilled out to 3/32".
Classic Target Sights(10.11.2009)
I have been shooting 1911s since the late 60s. I went from the classic G.I. issue sights to shooting Colt Gold Cups.
This style of sights is good for a person who carries a 1911 as a service pistol that has a need for precision shooting.