Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Ristruttura il tuo 1911 con il set di 11 perni CASPIAN! 🔧 Realizzato in acciaio trattato per una lunga durata e resistenza all'usura.

CASPIAN 1911 PIN SET - CASPIAN 1911 PIN SET, SS

168000127

Varianti:

CASPIAN 1911 PIN SET, SS
54.9 CHF 3 CHF 54.90 *
In magazzino
N. prodotto: 168000127
In magazzino
54.9 CHF 3 CHF 54.90 *
-39 %
CASPIAN 1911 PIN SET, CS
29.61 CHF 2 CHF 29.61 * CHF 48.90
In magazzino
N. prodotto: 168000128
In magazzino
29.61 CHF 2 CHF 29.61 * CHF 48.90
29.61 54.9 2 CHF
54.9 CHF CHF 54.90

Prezzi comprensivi di IVA più spedizione

N. prodotto: 168000127

N. fab.: P28SC

Set completo di 11 perni e plungers rettificati con precisione per ristrutturare un 1911 esistente o per costruirne uno nuovo da zero. Trattato termicamente per una straordinaria resistenza all'usura superficiale e una lunga durata. Disponibile in acciaio al carbonio blu opaco o in acciaio inossidabile a finitura naturale.
In magazzino

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

1
2
3
4
5
6
7
8
9
10+

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Varianti:

CASPIAN 1911 PIN SET, SS
54.9 CHF 3 CHF 54.90 *
In magazzino
N. prodotto: 168000127
In magazzino
54.9 CHF 3 CHF 54.90 *
-39 %
CASPIAN 1911 PIN SET, CS
29.61 CHF 2 CHF 29.61 * CHF 48.90
In magazzino
N. prodotto: 168000128
In magazzino
29.61 CHF 2 CHF 29.61 * CHF 48.90

Descrizione:

Mostra originale (inglese)
Sostituisce ogni perno nella pistola; indurito a caldo per forza e durata
Set completo di 11 perni e plungers rettificati con precisione per ristrutturare un 1911 esistente o per costruirne uno nuovo da zero. Trattato termicamente per una straordinaria resistenza all'usura superficiale e una lunga durata. Disponibile in acciaio al carbonio blu opaco o in acciaio inossidabile a finitura naturale.

Top takeaways

  1. Set completo di 11 perni e pistoni per ristrutturare o costruire un 1911.
  2. Trattato termicamente per resistenza all'usura e lunga durata.
  3. Disponibile in acciaio al carbonio bluato o acciaio inossidabile, compatibile con i modelli Government e Commander.

Caratteristiche

  • Adatto per: 1911
  • Modello: Commander,Government
  • Peso della spedizione: 0.014kg
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm

Dettagli dell'elemento

Made in Usa

Recensioni dei clienti

Valutazioni dei clienti (1)

3 / 5
Raccomandato con riserve

Brownells USA Buyer Beware 27.12.2011

I bought this set of pins to finish out a 1911 build I'm doing for my wife. I ordered the Caspian Race Ready Receiver (168-100-110) for the build, so I figured I'd order this pin set since it's made by the same manufacturer. The ejector pin in this set is solid, and I think it's slightly oversize, as it bent while I was trying to install it into the ejector pin hole (yes, I had done the requisite notching of the ejector post, and there was no blocking of the hole when I looked thru it; I also should have measured the diameter of the pin against the diameter of the hole--I really think a roll pin is better for this application).

Additionally, if you decide to use the Cylinder and Slide Professional Trigger Kit (206-000-019), the hammer strut pin in this set is too large (the pin is .095 and the hole in the hammer is about .093). I reamed out the hole in the hammer, but it was still a very hard pin to drive in.

In the future, I will probably order a different set of pins. I may or may not order Caspian pins again, I haven't yet decided. The mainspring parts are all fine, as are the plunger pins and the sear and hammer pins.

I want to caveat the "Would you recommend this to a friend" question by saying I would recommend it, but I would also tell them what I experienced.

Scelti da altri clientie

Torna all'inizio