Smaller diameter heads let you see more of what you're trying to hit, giving you better control. The lighter 4 oz. weight is our favorite for the bulk of most pistolsmithing work. Tough, long- lasting, non-marking extruded nylon and turned brass heads are easily replaced when they wear out or become deformed.
SPECS: ¾" (19mm) diameter faces, 10 7/2" (26.67cm) long hickory handle, 4 oz. (113g) approximate weight.
Altro...
In robusto Nylon & ottone morbido nella giusta dimensione
Teste di diametro più piccole ti permettono di vedere più di quello che stai cercando di colpire, dandovi un controllo migliore. Il peso più leggero di 4 once è la nostra preferita per la massa della maggior parte del lavoro pistolsmithing. Duro, durevole, non-marcatura estruso in nylon e trasformato in ottone teste sono facilmente sostituite quando si usurano o diventare deforme.
Specifiche: ¾"(19mm) diametro volti, 10 7/2" (26,67 cm) manico hickory lunghi, Peso approssimativo di 4 once (113 g).
Altro...
Punteggi dei clienti per BROWNELLS 3/4" NYLON/BRASS HAMMER
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4.5
Good Quality for Cheap(13.06.2011)
Good well made brass/nylon hammer. I use it on every build and it never marks my rifles which is what i bought it for. If you want more heft get a cheap ballpeen hammer.
Perfect for Lower Builds(12.10.2012)
I had wanted the bigger hammer to build my AR lower but they were back-ordered. I was extremely pleased with this 3/4" hammer as it seemed to be perfect for what I needed a hammer for. I may buy the replaceable end hammer in the future but for what I wanted to do, this worked just fine. Light weight and easy to control light easy taps. I could see a BFH needed if you are planning to remove your front sight, but stay with this one for the smaller jobs.
N. prodotto: 818600075 BROWNELLS 3/4" NYLON/BRASS HAMMER Parti Fabbricante: 156034 Teste di diametro più piccole ti permettono di vedere più di quello che stai cercando di colpire, dandovi un controllo migliore. Il peso più leggero di 4 once è la nostra preferita per la massa della maggior parte del lavoro pistolsmithing. Duro, durevole, non-marcatura estruso in nylon e trasformato in ottone teste sono facilmente sostituite quando si usurano o diventare deforme.
38.9CHF34CHF 38.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Dimensioni:
3/4
Peso:
4 oz
Tipo:
Brass,Nylon
Peso della spedizione: 0.159kgAltezza di spedizione: 20mmLarghezza di spedizione: 69mmLunghezza di spedizione: 259mm
Smaller diameter heads let you see more of what you're trying to hit, giving you better control. The lighter 4 oz. weight is our favorite for the bulk of most pistolsmithing work. Tough, long- lasting, non-marking extruded nylon and turned brass heads are easily replaced when they wear out or become deformed.
SPECS: ¾" (19mm) diameter faces, 10 7/2" (26.67cm) long hickory handle, 4 oz. (113g) approximate weight.
Altro...
In robusto Nylon & ottone morbido nella giusta dimensione
Teste di diametro più piccole ti permettono di vedere più di quello che stai cercando di colpire, dandovi un controllo migliore. Il peso più leggero di 4 once è la nostra preferita per la massa della maggior parte del lavoro pistolsmithing. Duro, durevole, non-marcatura estruso in nylon e trasformato in ottone teste sono facilmente sostituite quando si usurano o diventare deforme.
Specifiche: ¾"(19mm) diametro volti, 10 7/2" (26,67 cm) manico hickory lunghi, Peso approssimativo di 4 once (113 g).
Altro...
Punteggi dei clienti per BROWNELLS 3/4" NYLON/BRASS HAMMER
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4.5
Good Quality for Cheap(13.06.2011)
Good well made brass/nylon hammer. I use it on every build and it never marks my rifles which is what i bought it for. If you want more heft get a cheap ballpeen hammer.
Perfect for Lower Builds(12.10.2012)
I had wanted the bigger hammer to build my AR lower but they were back-ordered. I was extremely pleased with this 3/4" hammer as it seemed to be perfect for what I needed a hammer for. I may buy the replaceable end hammer in the future but for what I wanted to do, this worked just fine. Light weight and easy to control light easy taps. I could see a BFH needed if you are planning to remove your front sight, but stay with this one for the smaller jobs.