Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

TIMNEY
308 AR DROP-IN TRIGGER MODULE SOLID SHOE

081950006700 883000023

Obtain A Super-Smooth Pull & Crisp Letoff In Minutes

Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. AR-.308 model has a factory-set 4 lb. pull weight, a solid shoe, and more hammer mass to ensure positive ignition of harder .308/7.62mm primers.

SPECS: Hammer – S7 tool steel, natural color, Teflon-Nickel coated. Trigger/Internal Components - Hardened A2 tool steel, black oxide finish. Housing – 6061 T6 aluminum, gold anodized finish. Fits rifles with .154" diameter hammer/trigger pin holes. Will not fit Colt-manufactured AR-15s with sear block. AR-.308 – non-adjustable 4 lb. pull weight. Fits AR-style .308 rifles that accept small-pin AR-15 trigger components.

Plus...

Obtenir un Pull super lisse & Letoff croustillante en quelques Minutes

Module autonome est prêt à installer dans votre AR petites broches et fournir un appui sur la détente de mono-étagés exceptionnellement douce, croquante, exempt de fluage qui se sent plus comme une action de boulon traditionnel qu'un déclencheur de fusil de combat. 100 % de drop-in — aucune armurerie, montage ou réglage requis. Tous les composants sont en captivité dans l'aluminium léger, jantes en aluminium de logement. Marteau est étincelage usinée à partir d'acier à outils S7 qui combine la dureté pour résister à l'usure avec la résistance de l'impact supérieure pour supporter un usage intensif sans écailler ou rupture. Autres composants sont EDM couper de l'acier à outils A2, puis traitée à Rc 56-60 pour une longue durée de vie par la chaleur. Surfaces de précision-terre engagement assurent superbe fiabilité et un communiqué épurées, marteau. Installe à l'aide d'épingles de déclenchement/marteau original de votre carabine ; design exclusif élimine le débrayage de la broche. Modèle AR-308 a un poids de 4 lb réglé en usine, une chaussure solide et plus de masse marteau pour assurer l'allumage commandé des amorces de.308/7.62mm plus difficiles.

SPECS : marteau – S7 outil en acier, couleur naturelle, enduit de Teflon-Nickel. Déclencheur interne/composants - acier à outils A2 durci, oxyde noir de finition. Logements – 6061 T6 aluminium, finition anodisée or. Correspond à fusils avec. 154" trous de goupille déclenchement/marteau diamètre. N'entre pas dans la fabrication Colt AR-15 s avec bloc de gâchette. AR-308 – non réglable 4 lb poids. Ajustements des fusils AR-style 308 qui acceptent des éléments déclencheurs de petites broches AR-15.

Plus...

Évaluations client de TIMNEY AR .308 TRIGGER MODULE, 4 LBS, SOLID SHOE

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.7

Nothing to Write Home About (02.07.2010)

This trigger is difficult to install. There are two tiny allen head lock screws that must be manuvered into place next to the hammer springs. Very hard to do without three hands.
Performance is only so-so after installation. No take up or slop but it seems to be set at about 8 pounds.
Better than the stock trigger to be sure but not worth the money. Timney usually does a better job on their triggers.

AR-.308 Trigger Module, Solid Shoe (19.07.2010)

Installed mine quite easily. Instructions are adequate but could be improved and Timney has techs available to assist/answer questions. There might be a small amount of creap in mine but if so, I see it as a good thing for this application.

Best thing I have added to my AR Varmint (24.05.2011)

I have built several AR's over the past several years, but always stoned the triggers and added lighter springs to get a better trigger pull. I wanted a 'drop in unit', and having had great results with other "Timmney" Triggers, went with this unit. This trigger is amazing compared to any other trigger I have used in a AR. As for the two screws that had to be installed, I spet maybe a full sixty seconds getting both in and tight. No problem!!

Make em Jealous. (15.09.2011)

I installed this trigger in my SASS build project. Took the rifle to the gon shop because of an unrelated issue. The people at the shop fell in love with the trigger just like I did. In fact one of the gunsmiths had a SASS and the first thing out of his mouth is "man, im jealous of that trigger." Its smooth and exact. Im going to install a Timney in my Remington Woodsmaster if they make one.

Wow, what a difference! (30.12.2011)

I recommend this trigger. The pull is consistent and the break is very clean. If you own a stock DPMS LR-308 with a factory trigger that takes FOREVER to break, you will not be disappointed with this purchase. I installed it myself after I watched a couple of videos as well as going to Timney's website and viewing the installation presentation. On a side note, if you are not mechanically inclined, have a friend install it who is.

GREAT TRIGGER!!! Hard to install (11.01.2012)

I have built many AR's and have done many trigger Jobs for customers and friends, but this trigger is GOLD right out of the box. IT is very difficult to install, not impossible, but not easy by ones self. making sure the trigger pins stay seated as you tighten the two allens can be frustrating but it is well worth it in the end. My trigger feels about 3 pounds at the most.... no creep, exactly what I expect from a [$] trigger.

I want to rate this trigger 10 stars! (02.06.2012)

Unquestionably the best upgrade/modification to my DPMS ar-15! Accuracy much improved from stock trigger. Easy install too. There are two retaining hex screws under the end length of the hammer spring that can be tricky. After studying the trigger & install instructions I took the ends of the hammer spring partially blocking the retainer hex screws & lifted both ends crossing them to the middle over each other. This cleared the area for installing the hex retaining screws. After both hex screws were installed, the hammer spring ends were uncrossed and fell back into their original place. The 4 lbs pull was unchanged by the prying up & crossing of the spring ends. Excellent trigger! Well worth the $$

Excellent! (15.01.2014)

Installed in a Ruger SR762 in minutes, per instructions. Would recommend watching You Tube related video. Went from factory 10.75 lb drag and creep to a crisp 4.0 lb trigger.

Great AR upgrade. (02.01.2015)

Easy install in my Bushmaster. Crisp trigger that took the long, hard, gritty pull out of my AR 10. I will buy another one for my 5.56. Can't wait to see how it performs at the range.

Phoned in. (25.03.2015)

4 lb pull is too heavy, I don't know why Timney made it so heavy. 3lb would have been perfect. They make a good trigger, but I think they have been resting on their laurels.

Nothing Not To Like (23.06.2015)

My first experience with Timney triggers was one I bought for my 10/22. Total drop in, great fit, great trigger. So I got this one for my DPMS style .308 AR build and it is everything I expected. Two triggers purchased, two great feeling triggers; do I detect a pattern?

Iâve purchased stripped AR lowers and built them up. With the last one I purchased a Ni Boron set and that was the best AR trigger Iâd tried. Iâm mentioning this to point out that I *DO* know how to install Mil Spec triggers and know what a good one feels like. Since I wanted a rifle that would be as accurate as possible I decided to actually put some money into this trigger. I could have gone with other manufacturers but while I do know how to install the fire control group I can get a bit lazy from time to time. So I looked into drop in triggers.

I wanted a trigger that was light enough to not impact my accuracy too much (Iâve got enough problems as is) but was heavy enough that I wouldnât worry about safety out in the field. Timneyâs 4 pound trigger seems to fit the bill. I followed the directions and installation was a snap. I saw one review complaining about the pins falling out. I had to laugh as the directions said to put a piece of tape over the pins until installation was complete. Once youâve tightened down the set screws to apply pressure to the pins (the last step) you can remove the tape and the pins are as tight as you could possibly want.

Iâve tried custom worked triggers on other guns at the range (not my guns but ones belonging to someone else) and while they might be a bit lighter I donât think that they break any crisper or have any less creep (i.e. none).

Any time I want an accurate trigger that is easy to install Iâm going to go with Timney for sure.

Crisp - Zero Creep in a DPMS GII Lower (11.01.2016)

No more creep. Light, repeatable release and feels like winding a Swiss watch while depressing the trigger. Trigger total movement is about 1/8"!

Instructions were spot on. Read them through first. One change would be to start the set screws before you drop it in. Just a turn. Too much and the pins won't go back in. After you have the assembly in position it's a bit of a chore to get them started because of the springs. Use grease in the socket to hold the screws to the wrench.

I put this in a new DPMS Gen II lower. Fits like a glove. The GII lower is different than the GI (LR-308) but rest assured it fits perfectly.

The hammer is bigger than the GII OEM hammer. The whole thing is a piece of art. High quality metal and finish.

Worth the money.

Lire 12 plus d'avis sur brownells.com

449.9 449.9 1 CHF

Référence: 883000023
TIMNEY AR .308 TRIGGER MODULE, 4 LBS, SOLID SHOE
Ref Fabricant: 670 081950006700 Module autonome est prêt à installer dans votre AR petites broches et fournir un appui sur la détente de mono-étagés exceptionnellement douce, croquante, exempt de fluage qui se sent plus comme une action de boulon traditionnel qu'un déclencheur de fusil de combat. 100 % de drop-in — aucune armurerie, montage ou réglage requis. Tous les composants sont en captivité dans l'aluminium léger, jantes en aluminium de logement. Marteau est étincelage usinée à partir d'acier à outils S7 qui combine la dureté pour résister à l'usure avec la résistance de l'impact supérieure pour supporter un usage intensif sans écailler ou rupture. Autres composants sont EDM couper de l'acier à outils A2, puis traitée à Rc 56-60 pour une longue durée de vie par la chaleur. Surfaces de précision-terre engagement assurent superbe fiabilité et un communiqué épurées, marteau. Installe à l'aide d'épingles de déclenchement/marteau original de votre carabine ; design exclusif élimine le débrayage de la broche. Modèle AR-308 a un poids de 4 lb réglé en usine, une chaussure solide et plus de masse marteau pour assurer l'allumage commandé des amorces de.308/7.62mm plus difficiles.

449.9 CHF 7 CHF 449.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR .308 Style: Sans RÃ¨glage

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: AR .308 Style: Sans RÃ¨glage Poids du colis: 0.068kg Hauteur d'expédition: 33mm Largeur d'expédition: 91mm Longueur d'expédition: 191mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c

Obtain A Super-Smooth Pull & Crisp Letoff In Minutes

Plus...

Obtenir un Pull super lisse & Letoff croustillante en quelques Minutes

Plus...

Évaluations client de TIMNEY AR .308 TRIGGER MODULE, 4 LBS, SOLID SHOE

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.7

Nothing to Write Home About (02.07.2010)

AR-.308 Trigger Module, Solid Shoe (19.07.2010)

Best thing I have added to my AR Varmint (24.05.2011)

Make em Jealous. (15.09.2011)

Wow, what a difference! (30.12.2011)

GREAT TRIGGER!!! Hard to install (11.01.2012)

I want to rate this trigger 10 stars! (02.06.2012)

Excellent! (15.01.2014)

Installed in a Ruger SR762 in minutes, per instructions. Would recommend watching You Tube related video. Went from factory 10.75 lb drag and creep to a crisp 4.0 lb trigger.

Great AR upgrade. (02.01.2015)

Easy install in my Bushmaster. Crisp trigger that took the long, hard, gritty pull out of my AR 10. I will buy another one for my 5.56. Can't wait to see how it performs at the range.

Phoned in. (25.03.2015)

4 lb pull is too heavy, I don't know why Timney made it so heavy. 3lb would have been perfect. They make a good trigger, but I think they have been resting on their laurels.

Nothing Not To Like (23.06.2015)

Crisp - Zero Creep in a DPMS GII Lower (11.01.2016)

Lire 12 plus d'avis sur brownells.com

Poursuivre vos achats

ZETA6 J-CLIP 5-SHOT SPEEDLOADER 2/PACK
J-CLIP 5-SHOT REVOLVER SPEEDLOADERS

ZETA6

En stock

CHF 18.90 *

Chargeurs Rapides Barillet

XTREME BALLISTICS RAT - Recoil Activation Trigger for LabRadar

XTREME BALLISTICS

En stock

CHF 69.90 *

Chronographe Balistique

WILSON COMBAT .273" (6.9MM) CENTER TO CENTER WILSON BARREL LINK
1911 BARREL LINK

WILSON COMBAT

En stock

CHF 15.90 *

Liaison Canon

4.8

WOLFF RUGER SP-101 KIT
17113 RUGER® SP-101® KIT

WOLFF

En stock

CHF 16.90 *

Kits Amélioration des Performances

PEARCE GRIP GLOCK PLUS ZERO GRIP FRAME INSERT
GRIP FRAME INSERT FOR GLOCK®

PEARCE GRIP

En stock

CHF 9.90 * CHF 7.53 - CHF 11.90*

Tampons Poignée

4.1

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.