Helps Prevent Jams By Making Sure Each Round Meets Specs Before Shooting
Make sure all your ammo is in spec before you shoot that critical match. One tool lets you check four popular calibers used in practical shooting matches: 9mm, .38 Super, .40 S&W, and .45 ACP. Helps you avoid jams, misfires, feeding problems, and other malfunctions caused by out-of-spec ammo that can cost you precious points—or the whole match. Machined aluminum with check holes precision bored using the same high-quality Clymer reamers.
Aide à prévenir les confitures en veillant à ce que chaque tour répond aux spécifications avant le tournage
Assurez-vous que tous vos munitions sont en spec avant de tirer cette correspondance critique. Un seul outil vous permet de vérifier les quatre calibres populaires utilisés dans des matchs de tir pratiques : 9mm,.38 Super,.40 S & W et.45 ACP. Vous aide à éviter les bourrages, ratés, problèmes et autres dysfonctionnements causés par des munitions de dehors-de-spec qui peuvent vous coûter de précieux points d'alimentation — ou tout le match. En aluminium usiné avec précision de trous s'ennuie en utilisant les mêmes alésoirs Clymer de haute qualité de contrôle.
SPECS : aluminium 6061 T6, anodisé, noir. 3"(7,6 cm) de long, 1" (2.5 cm) de large, 1¼"(3,2 cm) de haut.
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Neat Tool(25.02.2010)
Great tool, I had about 1000 45ACP rounds loaded and I would occasionally have one that would keep the slide from going into full battery. Apparently, I had a few cast bullets that came out of one mould station that were a tad out of spec (20 yr old lee mould). This tool helped me sort through all that ammo in just a jiffy. I only wish they made them in more calibers.
One great tool!(04.11.2010)
If you reload, this thing is wonderful. I wish I had one of these years ago.
A must for remanufactured ammo(16.11.2014)
After having a remanufactured round jam in the chamber and prevent the the slide from going into battery on my 9mm 1911, I got this gage to check all my remanufactured ammo. Previously I had removed the barrel to do case checking. Comparing good vs bad rounds, it gave the same results as the barrel.
My only concern is that the aluminum may be subject to wear. After a couple thousand rounds, I can see some wear on the corner of the machined hole. But it will probably provide years of good service. Having all four major handgun calibers is convenient and it is not too bad doing the rounds one at a time.
So far I have weeded out about 75 rounds out of 2500 of 9mm. The bad rounds range from won't fit, but nothing visibly wrong, to crimped brass and improperly seated bullets. Had better luck with .45, checked about 500 rounds and all were good.
Référence: 296000125 EGW 4 CALIBER CHECKER (9MM, .40 S&W, .45 ACP & 38 SUPER) Ref Fabricant: 70100841370107599 Assurez-vous que tous vos munitions sont en spec avant de tirer cette correspondance critique. Un seul outil vous permet de vérifier les quatre calibres populaires utilisés dans des matchs de tir pratiques : 9mm,.38 Super,.40 S & W et.45 ACP. Vous aide à éviter les bourrages, ratés, problèmes et autres dysfonctionnements causés par des munitions de dehors-de-spec qui peuvent vous coûter de précieux points d'alimentation — ou tout le match. En aluminium usiné avec précision de trous s'ennuie en utilisant les mêmes alésoirs Clymer de haute qualité de contrôle.
34.9CHF5CHF 34.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 45 Auto (ACP), 9 mm Luger, 40 S&W, 38 Super
Helps Prevent Jams By Making Sure Each Round Meets Specs Before Shooting
Make sure all your ammo is in spec before you shoot that critical match. One tool lets you check four popular calibers used in practical shooting matches: 9mm, .38 Super, .40 S&W, and .45 ACP. Helps you avoid jams, misfires, feeding problems, and other malfunctions caused by out-of-spec ammo that can cost you precious points—or the whole match. Machined aluminum with check holes precision bored using the same high-quality Clymer reamers.
Aide à prévenir les confitures en veillant à ce que chaque tour répond aux spécifications avant le tournage
Assurez-vous que tous vos munitions sont en spec avant de tirer cette correspondance critique. Un seul outil vous permet de vérifier les quatre calibres populaires utilisés dans des matchs de tir pratiques : 9mm,.38 Super,.40 S & W et.45 ACP. Vous aide à éviter les bourrages, ratés, problèmes et autres dysfonctionnements causés par des munitions de dehors-de-spec qui peuvent vous coûter de précieux points d'alimentation — ou tout le match. En aluminium usiné avec précision de trous s'ennuie en utilisant les mêmes alésoirs Clymer de haute qualité de contrôle.
SPECS : aluminium 6061 T6, anodisé, noir. 3"(7,6 cm) de long, 1" (2.5 cm) de large, 1¼"(3,2 cm) de haut.
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Neat Tool(25.02.2010)
Great tool, I had about 1000 45ACP rounds loaded and I would occasionally have one that would keep the slide from going into full battery. Apparently, I had a few cast bullets that came out of one mould station that were a tad out of spec (20 yr old lee mould). This tool helped me sort through all that ammo in just a jiffy. I only wish they made them in more calibers.
One great tool!(04.11.2010)
If you reload, this thing is wonderful. I wish I had one of these years ago.
A must for remanufactured ammo(16.11.2014)
After having a remanufactured round jam in the chamber and prevent the the slide from going into battery on my 9mm 1911, I got this gage to check all my remanufactured ammo. Previously I had removed the barrel to do case checking. Comparing good vs bad rounds, it gave the same results as the barrel.
My only concern is that the aluminum may be subject to wear. After a couple thousand rounds, I can see some wear on the corner of the machined hole. But it will probably provide years of good service. Having all four major handgun calibers is convenient and it is not too bad doing the rounds one at a time.
So far I have weeded out about 75 rounds out of 2500 of 9mm. The bad rounds range from won't fit, but nothing visibly wrong, to crimped brass and improperly seated bullets. Had better luck with .45, checked about 500 rounds and all were good.