Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
853675008723 100032691
The Ultimate Funnel for Reloaders
The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today. The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber. They do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra-magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely. 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in. Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels. MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools! The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder. “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.  
54.9 54.9 1 CHF
N. prodotto: 100032691
AREA 419 419 POWDER FUNNEL
Parti Fabbricante: 419-FN-BODY 853675008723 L'imbuto di polvere alluminio billet 419 Area utilizza un sistema di intercambiabile, calibro specifico, teste per rendere l'imbuto finale per reloaders disponibili oggi. Teste intercambiabili di imbuto 419 Area discussione sull'imbuto e sono specifiche per ogni calibro diametro del collo. Che non si basano sull'attacco sopra il corpo del caso per tenere a posto. Essi sono di dimensioni leggermente più grande rispetto al diametro del collo così che tengono solidi sul caso. Ogni testa ha un foro di dimensioni di pochi millesimi inferiori al diametro del proiettile, quindi il flusso massimo è raggiunto per ogni calibro. Questo è enorme per i ragazzi di super ultra-magnum (375 Cheytac, 408 Cheytac, 50 BMG, ecc.). L'interfaccia tra le teste ed il fumaiolo è progettata in modo tale che nessun kernel può mai rimanere bloccati tra i due, fino a quando la testa è completamente serrata. 3/8 ″ alto tratto rettilineo verso l'alto per aiutare a prevenire il kernel di polvere dal rimbalzo fuori quando versato in. Superfici lisce al collo dell'imbuto e dentro le teste promuovono flusso rapido e prevenire qualsiasi kernel attaccare. MADE IN USA! Dagli USA in alluminio, su una USA made mulino HAAS, con USA made utensili da taglio! Design di imbuto è sia estetica e prestazioni guidato. In lavorazione da un pezzo solido di alluminio 6061-T6 non significa nessuna carica statica a cui aggrapparsi i kernel per le pareti dell'imbuto. Questo rende anche molto più sicuro per l'utilizzo con polvere nera. "Flauti" dall'esterno sono per gli sguardi, all'interno però, disturbano i kernel di polvere da cercando di marmellata al collo. Dà anche qualche spazio aereo quindi non ottenere pieno zeppo fino così strettamente, tutte finalizzate ad aumentare il flusso attraverso l'ugello.
54.9 CHF 8 CHF 54.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Calibro: Universale

Caratteristiche

Calibro: Universale Peso della spedizione: 0.079kg Altezza di spedizione: 56mm Larghezza di spedizione: 91mm Lunghezza di spedizione: 81mm

Dettagli dell'elemento

Made in Usa



The Ultimate Funnel for Reloaders
The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today. The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber. They do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra-magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely. 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in. Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels. MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools! The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder. “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.  
Newsletter