Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Risolvi i problemi di precisione con i cutter per smussatura BROWNELLS. 🔧 Perfetti per il tuo revolver, assicurano un inserimento fluido dei proiettili.
  • BROWNELLS 45  1/2" CHAMFERING CUTTER ONLY
  • BROWNELLS 45  1/2" CHAMFERING CUTTER ONLY
  • BROWNELLS 45  1/2" CHAMFERING CUTTER ONLY
  • BROWNELLS 45  1/2" CHAMFERING CUTTER ONLY

BROWNELLS 45 1/2" CHAMFERING CUTTER ONLY

050806017252 080588454

Varianti:

BROWNELLS 45 1/2" CHAMFERING CUTTER ONLY
109.9 CHF 36 CHF 109.90 *
N. prodotto: 080588454
In magazzino
109.9 CHF 36 CHF 109.90 *
BROWNELLS 45 17 CALIBER 1/2" CHAMFER CUTTER ONLY
104.9 CHF 12 CHF 104.90 *
N. prodotto: 080588453
In magazzino
104.9 CHF 12 CHF 104.90 *
BROWNELLS 45 5/8" CHAMFERING CUTTER ONLY
94.9 CHF 0 CHF 94.90 *
N. prodotto: 080588625
Riordinato
94.9 CHF 0 CHF 94.90 *
94.9 109.9 3 CHF
109.9 CHF CHF 109.90

Prezzi comprensivi di IVA più spedizione

N. prodotto: 080588454

050806017252 Un muso danneggiato o tagliato male può davvero compromettere la precisione; i bordi affilati sulle bocche delle camere del cilindro di un revolver possono causare problemi nell'inserimento dei proiettili nel cilindro - un vero problema quando si utilizzano i caricatore a velocità. Risolvi entrambi i problemi con questo cutter.
In magazzino
1
2
3
4
5
6
7
8
9
10+

Varianti:

BROWNELLS 45 1/2" CHAMFERING CUTTER ONLY
109.9 CHF 36 CHF 109.90 *
N. prodotto: 080588454
In magazzino
109.9 CHF 36 CHF 109.90 *
BROWNELLS 45 17 CALIBER 1/2" CHAMFER CUTTER ONLY
104.9 CHF 12 CHF 104.90 *
N. prodotto: 080588453
In magazzino
104.9 CHF 12 CHF 104.90 *
BROWNELLS 45 5/8" CHAMFERING CUTTER ONLY
94.9 CHF 0 CHF 94.90 *
N. prodotto: 080588625
Riordinato
94.9 CHF 0 CHF 94.90 *

Descrizione:

Mostra originale (inglese)
Un muso danneggiato o tagliato male può davvero compromettere la precisione; i bordi affilati sulle bocche delle camere del cilindro di un revolver possono causare problemi nell'inserimento dei proiettili nel cilindro - un vero problema quando si utilizzano i caricatore a velocità. Risolvi entrambi i problemi con questo cutter.

SPECIFICHE: Cutter - 3-1/4" (8.25cm) di lunghezza (eccetto il cutter per calibro .17 - 2-3/8" (6cm) di lunghezza). Diametro di 1/2" (12.7mm) o 5/8" (15.8mm).

Top takeaways

  • Precision di taglio
  • Riduce inceppamenti
  • Facile da usare

Caratteristiche

  • Peso della spedizione: 0.05kg
  • Altezza di spedizione: 1mm
  • Larghezza di spedizione: 102mm
  • Lunghezza di spedizione: 152mm
  • UPC: 050806017252

Dettagli dell'elemento

Made in Usa

Recensioni dei clienti

Valutazioni dei clienti (2)

3 / 5
Non raccomandato

Brownells USA pilot hole too large 05.11.2016

The pilot hole is too large for the .17 cal pilots. The pilot must be shimmed with wraps of .001" stock until proper fit is attained. Only then can a nice cut be made. There is apparently a miscommunication between the pilot and cutter maker. My cutters and pilots for calibers 22 and up all fit together tightly.

Assolutamente raccomandato

Brownells USA 45°, 5/8" Chamfering Cutter 04.06.2016

Used this with Brownells .45 BBL. Revolver Muzzle Brass Pilot (#080-944-450) to re-crown my S&W 625PC. The brass pilot measured .4405" diameter which was a good fit for my bore (.443") diameter. The Cutter's diameter (5/8") was a good match on the guns I used it on (S&W 625, 627, & 686). The last one I used it on left chatter marks/ripples. Not sure why as it cut the others smoothly. (Hope it's not getting dull already?) Purchase Brownells Facing & Chamfering Cutter Handle (#080-589-000) to use these together.

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio