Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
076683117038 100060901
This two-die set is for 5.7x28mm cases used in tight-chambering semi-automatic, pump or lever-action rifles. It consists of a Small Base Sizer with an Expander-Decapping Unit and Regular Seater Die with Seater Plug. The sizer resizes cases below SAAMI minimums, reducing the shoulder and body by a few thousandths. It also de-primes the case. The included Seater Die has a built-in roll crimper to secure the bullet at the same time it’s seated. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.
144.9 144.9 1 CHF
N. prodotto: 100060901
RCBS 5.7X28MM SMALL BASE DIE SET
Parti Fabbricante: 11703 076683117038 Questo set di due-die è per casi di 5.7x28mm utilizzato in fucili semiautomatici, pompa o leva stretto chambering. Si compone di una piccola Base Sizer con un'unità di decapsulatura Expander e regolari posti Die con posti Plug. Il sizer ridimensiona casi inferiore a minimi lappone, riducendo la spalla e il corpo di pochi millesimi. E ' anche numeri de-primi il caso. Il Die posti incluso ha un built-in rullo piegatore per garantire il proiettile nel momento stesso in cui che è inserita. Per sedile proiettili senza aggraffatura, basta svitare il dado fino a quando l'anello di crimpatura si impegna non è più il cassa bocca.
144.9 CHF 0 CHF 144.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Cartuccia: 5.7 x 28 mm

Caratteristiche

Cartuccia: 5.7 x 28 mm Peso della spedizione: 0.454kg Altezza di spedizione: 51mm Larghezza di spedizione: 127mm Lunghezza di spedizione: 152mm

Dettagli dell'elemento

Made in Usa



This two-die set is for 5.7x28mm cases used in tight-chambering semi-automatic, pump or lever-action rifles. It consists of a Small Base Sizer with an Expander-Decapping Unit and Regular Seater Die with Seater Plug. The sizer resizes cases below SAAMI minimums, reducing the shoulder and body by a few thousandths. It also de-primes the case. The included Seater Die has a built-in roll crimper to secure the bullet at the same time it’s seated. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.
Newsletter