Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
817272000000 100500300
Prevents Threading Rimfire Suppressors On Too Far
SilencerCo’s 1/2"-28 Rifle Thread Spacer corrects the problem of a .22 rimfire barrel with muzzle threads that are too long. .22 caliber rimfire and centerfire sound suppressors have the same thread pitch 1/2"-28, but the threaded portion of the muzzle is longer on centerfire rifles. Manufacturers goof up more often than you’d expect and give rimfire muzzles centerfire-length threads. If a rimfire muzzle has an over-long threaded area, you run the risk of damaging your suppressor by tightening it too far onto the barrel. At the least, the suppressor might not be positioned correctly for optimum operation. The SilencerCo 1/2"-28 Rifle Thread Spacer is the solution. It covers the excess threads, while properly positioning your rimfire suppressor on the muzzle. Shortens the thread area while maintaining concentricity Gives your rimfire suppressor a solid shoulder Cleans up aesthetics of the rifle by hiding excess threads Machined steel, black oxide finish SilencerCo’s 1/2"x28 Rifle Thread Spacer fills the gap that would otherwise be left between the silencer and thread shoulder. Check your rifle today!  
33.9 33.9 1 CHF
N. prodotto: 100500300
SILENCERCO ADAPTER 1/2X28 THREAD SPACER
Parti Fabbricante: AC114 817272000000 1/2"-28 fucile Thread distanziale di appositamente per correggere il problema di un barile di,22 rimfire con thread di muso che sono troppo lunghi. ,22 calibro rimfire e centerfire soppressori di suono hanno lo stesso passo di filettatura 1/2"-28, ma la porzione filettata del muso è più lunga su fucili centerfire. Produttori si incasina più spesso di quanto ci si aspetta e dare rimfire museruole centerfire-lunghezza discussioni. Se un muso di rimfire ha un troppo lunghi filettato zona, si corre il rischio di danneggiare il soppressore di stringerlo troppo lontano sulla canna. Almeno, il soppressore non potrebbe essere posizionato correttamente per un funzionamento ottimale. Lo spaziatore per filettatura fucile appositamente 1/2"-28 è la soluzione. Esso copre i fili in eccesso, mentre il corretto posizionamento il soppressore di rimfire sul muso. Accorcia la zona di thread mentre mantenendo la concentricità dà il soppressore di rimfire una spalla solida pulisce estetica del fucile, nascondendo in eccesso filati lavorati in acciaio, finitura ossido nero si riempie di fucile Thread distanziale di 1/2 "x 28 di appositamente il divario che altrimenti rimarrebbe tra il silenziatore e la spalla di thread. Controlla il tuo fucile oggi!
33.9 CHF 0 CHF 33.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Filetti: 1/2-28 Finitura: Nero

Caratteristiche

Filetti: 1/2-28 Finitura: Nero Peso della spedizione: 0.068kg Altezza di spedizione: 5mm Larghezza di spedizione: 99mm Lunghezza di spedizione: 132mm

Dettagli dell'elemento

Made in Usa



Prevents Threading Rimfire Suppressors On Too Far
SilencerCo’s 1/2"-28 Rifle Thread Spacer corrects the problem of a .22 rimfire barrel with muzzle threads that are too long. .22 caliber rimfire and centerfire sound suppressors have the same thread pitch 1/2"-28, but the threaded portion of the muzzle is longer on centerfire rifles. Manufacturers goof up more often than you’d expect and give rimfire muzzles centerfire-length threads. If a rimfire muzzle has an over-long threaded area, you run the risk of damaging your suppressor by tightening it too far onto the barrel. At the least, the suppressor might not be positioned correctly for optimum operation. The SilencerCo 1/2"-28 Rifle Thread Spacer is the solution. It covers the excess threads, while properly positioning your rimfire suppressor on the muzzle. Shortens the thread area while maintaining concentricity Gives your rimfire suppressor a solid shoulder Cleans up aesthetics of the rifle by hiding excess threads Machined steel, black oxide finish SilencerCo’s 1/2"x28 Rifle Thread Spacer fills the gap that would otherwise be left between the silencer and thread shoulder. Check your rifle today!  
Newsletter