Lightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mounts T-1 red dot at lowest height.
SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31” (7.8mm). Fits Aimpoint Micro series red dot sights only.
Plus...
Solide comme le roc Mont
Léger, rapide-détacher Mont vous permet d'installez et enlevez votre dot de série rouge Aimpoint Micro en quelques secondes. Remplace l'usine originale base et assure à la visée Aimpoint avec quatre, haute résistance, acier vis Torx ® pour un serré tenir sous lourd recul. Supports T-1 red dot à plus basse altitude.
SPECS : 6061 T6 aluminium, hardcoat T3 mil-spec anodisé, noir mat. Hauteur mesurée du haut du rail vers le bas du corps portée -. 31"(12.5 mm). S'adapte Aimpoint Micro série rouge dot sites seulement.
Plus...
Évaluations client de AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.5
works great with Sig Romeo5(05.11.2017)
Works well in conjunction with a fixed front sight post and allows a less obstructed view. Is secure and comes off quickly and does not add much weight. About 7.5 oz for the sight and base.
Great mount(09.01.2016)
I purchased this for my Aimpoint H1 and I am more than pleased with it. Sturdy mount, easy to install, and takes a beating in training. Highly recommend.
solid mount(30.08.2011)
I've used a couple of these mounts, the AD-T1-10 provides an absolute cowitness with flattop AR's. Overall I'm happy with these, they are solid and lock up tight, a good value for the money. This particular model is the low model for using on shotguns, pistols, etc. [...] I was going to go with a larue, but the I beam design they use on their absolute cowitness model looks flimsy to me.
mounted on AK(21.11.2015)
I used this to mount an Aimpoint T1 on my Maadi AK. When attached to the Ultimak gas tube I cannot see the enough of the iron sights to use them effectively - my reason for 4 stars. Otherwise, the mount is sturdy, easy to remove and it's American made.
Référence: 100004024 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK Ref Fabricant: ADT1LSTD818503010385 Léger, rapide-détacher Mont vous permet d'installez et enlevez votre dot de série rouge Aimpoint Micro en quelques secondes. Remplace l'usine originale base et assure à la visée Aimpoint avec quatre, haute résistance, acier vis Torx ® pour un serré tenir sous lourd recul. Supports T-1 red dot à plus basse altitude.
174.9CHF6CHF 174.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 000004423 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 CAS-V MOUNT STANDARD LEVER BLACK Ref Fabricant: ADT1CASVSTD818503010408 Léger, rapide-détacher Mont vous permet d'installez et enlevez votre dot de série rouge Aimpoint Micro en quelques secondes. Remplace l'usine originale base et assure à la visée Aimpoint avec quatre, haute résistance, acier vis Torx ® pour un serré tenir sous lourd recul. Supports T-1 red dot à plus basse altitude.
179.9CHF8CHF 179.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Couleur: Matte NoirFits / Used For: Aimpoint Micro
Référence: 100017113 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 CO-WITNESS MOUNT STANDARD LEVER BLACK Ref Fabricant: ADT110STD818503010422 Léger, rapide-détacher Mont vous permet d'installez et enlevez votre dot de série rouge Aimpoint Micro en quelques secondes. Remplace l'usine originale base et assure à la visée Aimpoint avec quatre, haute résistance, acier vis Torx ® pour un serré tenir sous lourd recul. Supports T-1 red dot à plus basse altitude.
Référence: 100017114 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOWER 1/3 COWITNESS MOUNT STD LEVER BLK Ref Fabricant: ADT111STD818503011184 Léger, rapide-détacher Mont vous permet d'installez et enlevez votre dot de série rouge Aimpoint Micro en quelques secondes. Remplace l'usine originale base et assure à la visée Aimpoint avec quatre, haute résistance, acier vis Torx ® pour un serré tenir sous lourd recul. Supports T-1 red dot à plus basse altitude.
Lightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mounts T-1 red dot at lowest height.
SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31” (7.8mm). Fits Aimpoint Micro series red dot sights only.
Plus...
Solide comme le roc Mont
Léger, rapide-détacher Mont vous permet d'installez et enlevez votre dot de série rouge Aimpoint Micro en quelques secondes. Remplace l'usine originale base et assure à la visée Aimpoint avec quatre, haute résistance, acier vis Torx ® pour un serré tenir sous lourd recul. Supports T-1 red dot à plus basse altitude.
SPECS : 6061 T6 aluminium, hardcoat T3 mil-spec anodisé, noir mat. Hauteur mesurée du haut du rail vers le bas du corps portée -. 31"(12.5 mm). S'adapte Aimpoint Micro série rouge dot sites seulement.
Plus...
Évaluations client de AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.5
works great with Sig Romeo5(05.11.2017)
Works well in conjunction with a fixed front sight post and allows a less obstructed view. Is secure and comes off quickly and does not add much weight. About 7.5 oz for the sight and base.
Great mount(09.01.2016)
I purchased this for my Aimpoint H1 and I am more than pleased with it. Sturdy mount, easy to install, and takes a beating in training. Highly recommend.
solid mount(30.08.2011)
I've used a couple of these mounts, the AD-T1-10 provides an absolute cowitness with flattop AR's. Overall I'm happy with these, they are solid and lock up tight, a good value for the money. This particular model is the low model for using on shotguns, pistols, etc. [...] I was going to go with a larue, but the I beam design they use on their absolute cowitness model looks flimsy to me.
mounted on AK(21.11.2015)
I used this to mount an Aimpoint T1 on my Maadi AK. When attached to the Ultimak gas tube I cannot see the enough of the iron sights to use them effectively - my reason for 4 stars. Otherwise, the mount is sturdy, easy to remove and it's American made.