Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

ULTIMAK
AK SCOUT MOUNT MODEL M2-B

100002177
Mount Picatinny Accessories For Mission-Specific Needs
The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions.  No Gunsmithing.  Made in U.S.A.

SPECS: Scout Mount – 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.

159.9 159.9 1 CHF
Référence: 100002177
ULTIMAK AK-47 SCOUT MOUNT
Ref Fabricant: M2B Le M2-B possède un rail de Picatinny style placé bien au-dessous de l'axe de vision de fer, ce qui en fait la monture optique le plus bas disponible pour l'AK. Avec un viseur tubulaire monté bas, vous serez en mesure d'utiliser votre optique sans un dosseret de peigne et continuer à utiliser votre attente régulière. Le système permet de co témoin (la possibilité d'utiliser vos curiosités de fer à travers un spectacle 1 x comme un système de sauvegarde visée) lorsqu'il est utilisé avec une vue réflexe tubulaire. Ce support résistant remplace l'original gaz en acier tube et dessus garde-main, elle ajoute moins d'une once au poids du fusil, ce qui en fait de loin le plus léger montage optique dans le monde. Le positionnement vers l'avant de l'optique permet une plus rapide, plus facile et plus naturel ciblant tout en conservant votre champ de vision complet. Plusieurs cibles ou des engagements de cible émouvante, avec les deux yeux ouverts, devient une seconde nature. Le Mont rarement, sinon jamais doit être enlevé pour nettoyer le fusil, c'est pourquoi vous ne se soucient pas perte de zéro. Étant donné que la monture est fixée au canon et pas coincée entre le bloc gaz et le collier de support comme le tube de gaz original, plusieurs UltiMAK utilisateurs ont rapporté une amélioration dans l'exactitude inhérente des leurs AKs. Le montage d'optique UltiMAK a été conçu pour assurer la compatibilité avec les variations d'une large gamme de AK fusil. Si vous avez un 7,62 x 39 calibre AK avec Canon standard de poids et une longueur standard, tube gaz amovible (environ sept pouces, ou 17,7 cm longueur du tube de gaz dans l'ensemble) le montage doit bien s'intégrer. Nous avons encore à Trouvez un fusil de la description qui précède notre monture ne sont pas compatibles, fournissant que le fusil est raisonnablement directement assemblé. Certaines AKs ont des blocs de gaz radicalement mal aligné contre le bloc de cran de mire. Dans de rares cas, cela peut provoquer des problèmes pour installer le support de UltiMAK. (avec trous d'aération, que l'on trouve principalement sur AKs chinois) Remplace le tube de gaz. Brides directement pour Canon de précision et une stabilité maximale. Corps solide, une pièce 6061-T6 aluminium anodisé dur. Vient avec 4140 pinces en acier, vis, clé allen et les instructions. Aucune armurerie. Made in U.S.A.
159.9 CHF 7 CHF 159.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Matte Noir Manufacture: AK-47 Matériaux: Aluminum Nombre d'Embases: 1-Pièce Style: Embases Tactiques

Caractéristiques

Couleur: Matte Noir Manufacture: AK-47 Matériaux: Aluminum Nombre d'Embases: 1-Pièce Style: Embases Tactiques Poids du colis: 0.227kg Hauteur d'expédition: 20mm Largeur d'expédition: 145mm Longueur d'expédition: 254mm

Détails de l'article

Fabriqué au USA




Mount Picatinny Accessories For Mission-Specific Needs
The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions.  No Gunsmithing.  Made in U.S.A.

SPECS: Scout Mount – 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.

Newsletter