A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail. Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.
SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
Un support robuste pour tes optiques premium.
Avec la popularité croissante des fusils basés sur l'AK dans les compétitions de tir à trois armes, le besoin d'un système de visée rapide, léger et totalement fiable a conduit à la création du support optique UltiMAK M1-B. Son rail de style Picatinny est positionné bien en dessous de l'axe de la visée en fer, ce qui en fait le support optique le plus bas disponible pour l'AK.
Caractéristiques principales :
- Permet d'utiliser tes optiques sans rehausseur de crosse tout en maintenant ta prise habituelle.
- Co witnessing possible avec un viseur réflexe tubulaire.
- Remplace le tube de gaz en acier d'origine et le garde-main supérieur, ajoutant moins d'une once au poids du fusil.
- Positionnement avant de l'optique pour un ciblage plus rapide et naturel tout en conservant un champ de vision complet.
- Installation légère et stable, clamping directement sur le canon pour une précision optimale.
Le support optique UltiMAK a été conçu pour être compatible avec une large gamme de variations de fusils AK. Si tu as un AK de calibre 7,62 x 39 avec un tube de gaz amovible de longueur standard (environ sept pouces ou 17,7 centimètres), le support devrait s'adapter parfaitement. Nous n'avons pas encore trouvé de fusil correspondant à cette description qui ne soit pas compatible, à condition que le fusil soit assemblé de manière raisonnablement droite.
Le montage solide en aluminium 6061-T6 anodisé dur est livré avec des pinces en acier 4140, des vis, une clé Allen et des instructions. Aucune armurerie requise pour l'installation.
Spécifications :
- Matériau : Aluminium 6061-T6, finition noire mate.
- Longueur : 6-7/8" (17.5 cm).
- Poids : 6.7 oz. (189 g).
- Compatible avec tous les fusils de calibre 7.62x39 ayant des tubes de gaz d'origine sans trous de port de gaz latéraux.
- L'installation peut nécessiter un léger ajustement du garde-main.