A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail. Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.
SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
Un supporto robusto per le tue ottiche premium
Con la crescente popolarità dei fucili basati su AK nelle competizioni di tiro a tre armi, la necessità di un sistema di mira veloce, leggero e completamente affidabile ha portato alla creazione del montaggio ottico UltiMAK M1-B. La sua guida in stile Picatinny è posizionata ben al di sotto dell'asse della mira, rendendo questo il montaggio ottico più basso disponibile per l'AK.
Caratteristiche principali
- Montaggio tubolare che consente di utilizzare l'ottica senza un rialzo per il comb.
- Possibilità di co witness con mirini reflex tubolari.
- Montaggio pesante che sostituisce il tubo del gas originale e il guardamano superiore, aggiungendo meno di un'oncia al peso del fucile.
- Posizionamento avanzato dell'ottica per un targeting più veloce e naturale mantenendo un campo visivo completo.
- Montaggio che raramente deve essere rimosso per pulire il fucile, evitando la perdita di zero.
- Compatibile con una vasta gamma di varianti di fucili AK.
Il montaggio UltiMAK è progettato per adattarsi perfettamente a fucili AK di calibro 7.62 x 39 con tubo del gas rimovibile di lunghezza standard (circa sette pollici, o 17,7 centimetri di lunghezza totale del tubo del gas). Finora non abbiamo trovato un fucile di questa descrizione che il nostro montaggio non si adatti, a condizione che il fucile sia assemblato in modo ragionevolmente dritto. Alcuni AK presentano blocchi del gas radicalmente disallineati rispetto al blocco della mira posteriore, il che può causare problemi nell'installazione del montaggio UltiMAK in rari casi.
Specifiche:
- Corpo in alluminio 6061-T6 anodizzato duro, un pezzo unico.
- Viene fornito con morsetti in acciaio 4140, viti, chiave a brugola e istruzioni.
- Nessun lavoro di gunsmithing necessario.
- Dimensioni: 6-7/8" (17.5 cm) di lunghezza.
- Peso: 6.7 oz. (189 g).
- Si adatta a tutti i fucili di calibro 7.62x39 che hanno tubi del gas originali senza fori di portata laterali.
- L'installazione potrebbe richiedere lievi lavorazioni al guardamano.