The Strike Industries Aluminum Extended Magazine Plate for GLOCK™ G19 (9mm) was designed to provide smoother magazine reloading through a slow drag / no snag design while maintaining maximum magazine capacity. Machined from 6061-T6 aluminum, this Extended Magazine Plate (EMP) adds plus 5 9mm rounds to OEM double stack GLOCK™ G19 magazines. Following the success of our EMP systems for pistols, the form factor and unique geometric design gives a unified and aggressive aesthetic look to your GLOCK™ G19. Included is an aluminum plate which adds extra locking security. Give your GLOCK™ pistol the extra rounds it deserves with the Strike Industries Aluminum Extended Magazine Plate (EMP) for GLOCK™ G19 (9mm). WARNING: DO NOT OVERTIGHTEN set screw when installing the aluminum locking plate. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package Contents: x1 Aluminum Extended Magazine Plate for GLOCK™ G19 x1 Extended length spring x1 Aluminum locking plate x1 Aluminum locking plate set screw (M3x8mm) x1 Hex tool x1 Warning card Product Features: Machined from 6061-T6 aluminum Plus 5 round capacity for 9mm Includes aluminum locking plate Low drag / no snag design Fits USPSA 140mm race division limit Available in anodized SI BLACKLINE, REDLINE or FDELINE colors COMPATIBILITY: GLOCK™ factory OEM G19 (9mm) double stack magazines SI EMP Pocket Clip Magwell: tested to work with SI magwells NOT COMPATIBLE: G23 (.40 Cal) 10-round magazines ETS Magazines NOTE: Not for sale to California, Hawaii, New York and New Jersey residents due to 10-round state laws. The checkout process will show NO shipping method available. It is the responsibility of the customer to know and abide with local gun laws. DISCLAIMER: Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary Threaded holes located on EMP are anodizing blind holes and may not be completely covered with coating WARNING: DO NOT OVERTIGHTEN set screw when installing the aluminum locking plate. If you are unsure, please contact our customer support team or consult with your local gunsmith. SI aluminum EMP was intentionally designed to be a tight fit and can damage the polymer magazine body base ears. Must be installed by a certified gunsmith only. Use of small c-clamp (or similar tool) to gently and lightly squeeze the bottom middle of the magazine body just above the plastic locking ears where the SI aluminum EMP attaches to the magazine. Just enough so the SI aluminum EMP will slide in or out. Be careful not to bend the OEM magazine body metal liner and remove the c-clamp (or similar tool) as soon as the SI aluminum EMP is installed or removed. C-clamp or similar tool may mar/scratch magazine body surface. Please be careful and use a material to protect the magazine body surface. DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Améliore ton GLOCK® G19 avec ce chargeur en aluminium étendu !
Le chargeur en aluminium étendu de Strike Industries pour GLOCK™ G19 (9mm) a été conçu pour offrir un rechargement de magazine plus fluide grâce à un design sans accroc tout en maintenant une capacité maximale. Usiné en aluminium 6061-T6, ce chargeur étendu (EMP) ajoute 5 cartouches de 9mm aux magazines GLOCK™ G19 à double pile d'origine.
Caractéristiques du produit :
- Usiné en aluminium 6061-T6
- Capacité augmentée de 5 cartouches pour 9mm
- Comprend une plaque de verrouillage en aluminium
- Design à faible traînée / sans accroc
- Compatible avec la limite de division de course USPSA de 140mm
- Disponible en couleurs anodisées SI BLACKLINE, REDLINE ou FDELINE
Compatibilité :
- Magazines GLOCK™ OEM G19 (9mm) à double pile
- Poche de clip SI EMP
- Magwell : testé pour fonctionner avec les magwells SI
Non compatible :
- G23 (.40 Cal)
- Magazines de 10 cartouches
- Magazines ETS
Remarque : Non disponible à la vente pour les résidents de Californie, Hawaï, New York et New Jersey en raison des lois sur les magazines de 10 cartouches. Le processus de paiement indiquera qu'aucune méthode d'expédition n'est disponible.
Il est de la responsabilité du client de connaître et de respecter les lois locales sur les armes à feu.
Avertissement :
- NE PAS SERRER TROP LE VIS de réglage lors de l'installation de la plaque de verrouillage en aluminium. Si tu n'es pas sûr, contacte notre équipe de support client ou consulte ton armurier local.
- Le SI aluminum EMP a été intentionnellement conçu pour être un ajustement serré et peut endommager les oreilles de base du corps du magazine en polymère. Doit être installé uniquement par un armurier certifié.
- Utilise un petit serre-joint (ou un outil similaire) pour presser doucement et légèrement le bas du corps du magazine juste au-dessus des oreilles de verrouillage en plastique où le SI aluminum EMP se fixe au magazine. Juste assez pour que le SI aluminum EMP puisse glisser dedans ou dehors. Fais attention de ne pas plier le liner en métal du corps du magazine OEM et retire le serre-joint dès que le SI aluminum EMP est installé ou retiré. Le serre-joint ou un outil similaire peut rayer la surface du corps du magazine. Sois prudent et utilise un matériau pour protéger la surface du corps du magazine.
Clause de non-responsabilité :
- Ce produit n'est pas fabriqué, autorisé, approuvé ou garanti par GLOCK. GLOCK ne garantit ni ne représente que ce produit est compatible avec les pistolets GLOCK.
- “GLOCK” est une marque déposée au niveau fédéral de GLOCK, Inc. et fait partie des nombreuses marques détenues par GLOCK, Inc. et GLOCK Ges.m.b.H. Ni Strike Industries Inc. ni ce site ne sont affiliés de quelque manière que ce soit avec, ou autrement approuvés par, GLOCK, Inc. ou GLOCK Ges.m.b.H. L'utilisation de “GLOCK” sur cette page sert uniquement à promouvoir la vente de pistolets, pièces ou composants GLOCK.
- Avertissement de la Proposition 65 de Californie : Ce produit contient des substances chimiques connues de l'État de Californie pour causer le cancer et des malformations congénitales ou d'autres dommages reproductifs. Pour plus d'informations : www.P65Warnings.ca.gov.