Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

MAGPUL
AR-15 BEV BLOCK

873750000145 100015280

The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability adn included pin keeps upper in proper position. The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance.

Plus...

La BEV Block (Canon Extension étau) est un outil de bloc d'étau tout-en-un, compact pour opérations d'assemblage AR des Ecrous cylindrique, flash hiders, etc.. Monte solidement dans un étau et fournit le support pour les billettes et forgés récepteurs supérieures. Engage le prolongement du Canon avec pattes en acier solides et tige de renfort de pleine longueur pour éviter la flexion. Dureté de l'acier est optimisée pour durabilité encore n'endommagera le prolongement du canon et Magpul POLYMERE est utilisé pour toutes les autres surfaces d'engagement pour protéger le récepteur en aluminium. Message joint torique utilise la glissière pour une stabilité supplémentaire et broche inclus garde supérieur en bonne position. BEV peut également être remis et utilisé comme un bloc d'étau bien mag pour soutenir le récepteur inférieur au cours de l'entretien.

Plus...

Évaluations client de MAGPUL BEV BLOCK-AR15/M4

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 4.5

Another Great One from Magpul! (23.12.2014)

Works Great! No more possibility or torqueing on the receiver. Super low profile and doesn't take up much space in my tool box. I've already used this several times while teaching AR Armorer class. Had several student run right to the ProShop and get their own right after class.

Best Tool For The AR-15 Builder. (01.01.2015)

Best tool for the job I have used to torque a barrel to receiver, also works on the flash hinder.

If you are building a AR-15 you have to get one.

Another benefit of using this is unlike the clam shell receiver tools this one dose not leave marks on the receiver.

Very well built tool.

It's Magpul, It works..

Mine was out of Spec (30.01.2015)

The BEV Block that I received would only engage (fit) the barrel extension on one of my barrels. It would not fit into the lugs on any other barrels (including a DD, so barrels not the issue). Waiting for the replacement to arrive. I will change this review if the replacement works.

Possibly the best AR upper block (02.02.2015)

I recently broke the lugs off an expensive receiver while using a block that the receiver pins onto the top of, the barrel nut was tightened in excess of 150 ft/lb by the manufacturer of the upper. Regardless, a new tool was in order. I purchased both the Magpul BEV block and a Geissele Reaction Rod at the same time. Between the two I prefer the Magpul BEV block because the receiver pins in place so it can't slide off, and the polymer seems to hold better in the vise so the block does not rotate lengthwise when torque is applied. With a bolt carrier inserted in the rear of the upper the assembly is solid, even without a carrier inserted it is fine for most applications. The only downside I can see is that it can not work on .22 or pistol caliber AR uppers because there are no lugs in the barrel extensions to interface with, but that is not the fault of the tool and won't effect most users.

Best Tool for the AR Platform, Ever! (11.02.2015)

Looking at this initially, I was very skeptical-- how could any tool THAT closely align with the barrel extension, to take any stress off of that barrel extension pin? It would have to be accurate within 1/10,000 of an inch or so and likely a few miliradians off of absolute milspec. "Tall order" I thought. Well MagPul did it. There is zero play in the engagement lugs and the entire set up is rock-solid. Easy to setup and very compact. Even though there is really no way to break this, I'm compelled to buy another, just to have a spare. Precisely fit every barrel / upper combination I had. I wish MagPul would get into making automobiles.

Fitting required (20.02.2015)

Worked only with 1 of 3 my uppers. Need to be fitted manually (with file). I could send it back to Magpul but i needed it urgently so fitted myself.

Overall: good concept bad execution.

Best AR tool I've ever purchased (06.04.2015)

I saw this at the Shot Show and ordered one immediately. So far, I've had about 15 different uppers on it, all but one fit perfectly. One was very snug; upon examination - that barrel extension wasn't perfectly lined up in the receiver. Unlike the clam-shell type upper receiver blocks, you donât have to remove the ejection port cover to use this.

Now that I own one, I use it more than I imagined; everything from simply changing muzzle devices to mounting and truing scope rings.

Another winner from Magpul (29.08.2015)

I was initially skeptical of the design of the BEV Block and I had already sold myself on the Reaction Rod. After watching every review I could find I decided to give the BEV a try, and I'm glad I did. It holds the barrel extension tightly, and doesn't mar the upper at all. After a couple uses mine is showing vise clamp marks, but I tend to over tighten whatever I put in a vise. Regardless, I could continue to over tighten the BEV and IMO it still could handle hundreds of more uses before requiring replacement. It's well worth the asking price.

Awesome for installing barrels (19.10.2015)

I have used the BEV block to install a dozen barrels so far and it's so simple to use that I wish it'd been around years ago. Sturdy and holds the barrel in place while protecting the upper receiver. No more marks on receivers due to clamping it with a clamshell. I highly recommend it to anyone that needs to install a new barrel.

Outstanding tool for AR (24.11.2015)

Excellent tool for barrel install or flash hider work. Fits my SW 5R barrel like a glove. Heavy, well made item. No instruction in my box but was able to figure out things pretty well. Receiver is supported with a pin thru the front takedown hole and in the rear by the bolt carrier. Leaves no marks on outside of receiver.

Could be used for scope fitting as well.

Worked perfectly (04.02.2016)

Worked perfectly for my first AR build. Barrel from Faxon Firearms, forged upper from Rainier Arms. The slim width, the same as a magazine, fits in my not so enormous bench vice. A clam-shell style vice block would be quite a bit wider and might not have fit. No negatives with the function of this product in my experience. Take the bolt out of the bolt carrier and slide the carrier onto the back of the BEV block when tightening or removing barrel nuts or muzzle devices.

First Time user (02.09.2016)

Honestly, bought the BEV Block because of the price and multi-use of the tool. If you have any doubts as to its ability to stand up to the torque of tightening the barrel put them aside. It worked great when applying full torque to the barrel nut. Turning it upside down in the vise allows it to securely hold the lower in the mag well. The only con I could mention is that even with the BCG inserted, and the pin in the takedown hole, it does allow the assembly to move around a bit, so if you're used to the old clamshell, realize that it won't be held solidly and un-moving. It does not pose a problem. Great tool.

Works Perfectly (08.12.2016)

The first one I ordered didn't fit my barrel extension for my build. I contacted Magpul, they responded quickly and said that they were aware of the issue. I got a new one in the mail from Magpul quicker than I could find the time to ship my first one back to them. Second one worked flawlessly for my first build and all of my subsequent builds. I wish they made one for big bore ARs, because I'd buy one of those too. A must have for anyone with the aptitude to build or maintain their own ARs.

Replacement works great (29.12.2016)

This one workes perfect! Workes on all the rifles that the first one would not. It is my go to vise block now.

Very Satisfied - Magpul BEV Block (27.05.2017)

The Magpul BEV block along with the Magpul AR wrench made quick work of removing and installing flash hiders on my Rock River Arms upper. No damage to the firearm and the tools are well made.

Solid AR Vise Block (27.08.2018)

Love the mag well block, and if you need more stability for barrel or handguard work flip this baby over. Durable & solid tool - Will be used regularly.

Lire 16 plus d'avis sur brownells.com

69.9 69.9 1 CHF

Référence: 100015280
MAGPUL BEV BLOCK-AR15/M4
Ref Fabricant: MAG536-BLK 873750000145 La BEV Block (Canon Extension étau) est un outil de bloc d'étau tout-en-un, compact pour opérations d'assemblage AR des Ecrous cylindrique, flash hiders, etc.. Monte solidement dans un étau et fournit le support pour les billettes et forgés récepteurs supérieures. Engage le prolongement du Canon avec pattes en acier solides et tige de renfort de pleine longueur pour éviter la flexion. Dureté de l'acier est optimisée pour durabilité encore n'endommagera le prolongement du canon et Magpul POLYMERE est utilisé pour toutes les autres surfaces d'engagement pour protéger le récepteur en aluminium. Message joint torique utilise la glissière pour une stabilité supplémentaire et broche inclus garde supérieur en bonne position. BEV peut également être remis et utilisé comme un bloc d'étau bien mag pour soutenir le récepteur inférieur au cours de l'entretien.

69.9 CHF 0 CHF 69.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.363kg Hauteur d'expédition: 165mm Largeur d'expédition: 76mm Longueur d'expédition: 44mm

Détails de l'article

Fabriqué au USA

Plus...

Évaluations client de MAGPUL BEV BLOCK-AR15/M4

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 4.5

Another Great One from Magpul! (23.12.2014)

Best Tool For The AR-15 Builder. (01.01.2015)

Mine was out of Spec (30.01.2015)

Possibly the best AR upper block (02.02.2015)

Best Tool for the AR Platform, Ever! (11.02.2015)

Fitting required (20.02.2015)

Worked only with 1 of 3 my uppers. Need to be fitted manually (with file). I could send it back to Magpul but i needed it urgently so fitted myself.

Overall: good concept bad execution.

Best AR tool I've ever purchased (06.04.2015)

Another winner from Magpul (29.08.2015)

Awesome for installing barrels (19.10.2015)

Outstanding tool for AR (24.11.2015)

Worked perfectly (04.02.2016)

First Time user (02.09.2016)

Works Perfectly (08.12.2016)

Replacement works great (29.12.2016)

This one workes perfect! Workes on all the rifles that the first one would not. It is my go to vise block now.

Very Satisfied - Magpul BEV Block (27.05.2017)

The Magpul BEV block along with the Magpul AR wrench made quick work of removing and installing flash hiders on my Rock River Arms upper. No damage to the firearm and the tools are well made.

Solid AR Vise Block (27.08.2018)

Love the mag well block, and if you need more stability for barrel or handguard work flip this baby over. Durable & solid tool - Will be used regularly.

Lire 16 plus d'avis sur brownells.com

Poursuivre vos achats

BROWNELLS AR-15 ARMORER'S WRENCH
AR-15 ARMORER'S WRENCH

BROWNELLS

En stock

CHF 64.90 *

Clés

3.6

MAGPUL ARMORER'S WRENCH
AR-15/M16 ARMORER'S WRENCH

MAGPUL

En stock

CHF 104.90 *

Clés

4.2

RADIAN WEAPONS AR-15 RAPTOR-LT AMBIDEXTROUS CHARGING HANDLE BLACK
AR-15 RAPTOR-LT CHARGING HANDLE 5.56

RADIAN WEAPONS

En stock

CHF 114.90 * CHF 114.90 - CHF 134.90*

Poignées de Chargement

MAGPUL AR-15 PMAG GEN M3 MAGAZINE 223/5.56 30RD POLYMER BLACK 1PK
AR-15 30RD PMAG GEN M3 MAGAZINE 223/5.56

MAGPUL

En stock

CHF 29.90 * CHF 28.90 - CHF 2'099.90*

Chargeurs | Magazines

4.1

AERO PRECISION ATLAS S-ONE HANDGUARD FREE FLOAT ALUMINUM 7.3" BLACK
AR-15 ATLAS S-ONE SLIM LINE HANDGUARDS FREE FLOAT M-LOK

AERO PRECISION

Récommandé

CHF 239.90 * CHF 239.90 - CHF 314.90*

4.7

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.